Product Overview
The GE Fanuc IC697BEM711 is a Bus Receiver Module (BRM) designed for the Series 90-70 PLC system. It enables high-speed parallel bus expansion, allowing the main rack to communicate with up to seven additional IC697 PLC racks over a total cable length / up to 50 feet (15 meters). This module is essential for systems requiring modular scalability and reliable communication across multiple racks.
Key Features
-
High-Speed Parallel Bus Expansion: Facilitates communication between the main rack and up to seven expansion racks.
-
S/tware Configuration: No DIP switches required; configuration is done via MS-DOS or Windows programming s/tware.
-
Hold 最後へ 州: サポートs holding the last state / output modules during faults or maintenance.
-
System Fault Isolation: Allows isolation / expansion racks for troubleshooting without affecting the main system.
-
LED Indicators: Three LEDs provide status information for module operation, termination, and bus expansion port.
-
Termination Plug: Requires a termination plug (IC697ACC702) in the last expansion rack to signal the end / the network.
Technical Specifications
| Specification | Details |
|---|---|
| モデル | IC697BEM711 |
| Module Type | Bus Receiver Module (BRM) |
| Series | GE Fanuc Series 90-70 |
| Slot Requirement | Must be installed in Slot 1 |
| サポートed Expansion | Up to 7 additional racks |
| Maximum Cable Length | 50 feet (15 meters) |
| Data Transfer Rate | 500 Kbytes/sec |
| Power Requirements | +5 V DC, 800 mA |
| Connectors | 2 × 25-pin D-shell connectors |
| LED Indicators | Module OK, Bus Activity, 最後へ Rack Status |
| Fault Isolation | サポートs hold last state during CPU communication loss |
| Configuration | S/tware configuration, no DIP switches required |
| Termination Requirement | Termination plug (IC697ACC702) in last expansion rack |
| Electrical Isolation | Non-isolated differential bus |
| Dimensions | 200 x 180 x 30 mm |
| 重量 | 0.46 kg |
よくある質問 (FAQ)
1. What is the purpose / the IC697BEM711 module?
The IC697BEM711 is used to expand the I/O capabilities / a Series 90-70 PLC system by connecting additional racks, allowing for more modules and greater system scalability.
2. How many racks can be connected using this module?
It supports up to seven additional racks, totaling eight racks including the main rack.
3. What is the maximum cable length supported?
The module supports a total cable length / up to 50 feet (15 meters) for connecting expansion racks.
4. Is the module easy to configure?
Yes, configuration is done through s/tware, eliminating the need for DIP switches or manual settings.
5. What is the data transfer rate / the module?
The module supports a data transfer rate / 500 Kbytes/sec.
6. Where should the IC697BEM711 module be installed?
It must be installed in Slot 1 / the main rack.
7. Does the module support fault isolation?
Yes, it allows for system fault isolation, enabling maintenance without affecting the entire system.
8. Is a termination plug required?
Yes, a termination plug (IC697ACC702) is required in the last expansion rack to signal the end / the network.
Related GE Fanuc モデルs
| モデル | 説明 |
|---|---|
| IC697BEM712 | Bus Transmitter Module |
| IC697BEM713 | Bus Transceiver Module |
| IC697BEM731 | Genius I/O Bus Controller |
| IC697BEM733 | Genius Remote I/O Scanner |
| IC697BEM742 | Bus Controller for FIP I/O Systems |
| IC697BEM761 | I/O Interface for Series Six PLC Integration |
Popular GE Fanuc モデルs
| モデル | 説明 |
|---|---|
| IC697CPU771 | Standard CPU Module |
| IC697CPU772 | Floating-Point CPU Module |
| IC697PCM711 | Programmable Coprocessor Module |
| IC697MDL740 | 16-Point Digital Output Module |
| IC697MDL750 | 32-Point Digital Input Module |
| IC697PWR711 | Power Supply Module |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。
