Product Overview
The GE Fanuc IC697BEM711 is a Bus Receiver Module (BRM) designed for the Series 90-70 PLC system. It enables high-speed parallel bus expansion, allowing the main rack to communicate with up to seven additional IC697 PLC racks over a total cable length sur up to 50 feet (15 meters). This module is essential for systems requiring modular scalability and reliable communication across multiple racks.
Key Features
-
High-Speed Parallel Bus Expansion: Facilitates communication between the main rack and up to seven expansion racks.
-
Ssurtware Configuration: No DIP switches required; configuration is done via MS-DOS or Windows programming ssurtware.
-
Hold Dernier État: Supports holding the last state sur output modules during faults or maintenance.
-
System Fault Isolation: Allows isolation sur expansion racks for troubleshooting without affecting the main system.
-
LED Indicators: Three LEDs provide status information for module operation, termination, and bus expansion port.
-
Termination Plug: Requires a termination plug (IC697ACC702) in the last expansion rack to signal the end sur the network.
Technical Specifications
| Specification | Details |
|---|---|
| Modèle | IC697BEM711 |
| Module Type | Bus Receiver Module (BRM) |
| Series | GE Fanuc Series 90-70 |
| Slot Requirement | Must be installed in Slot 1 |
| Supported Expansion | Up to 7 additional racks |
| Maximum Cable Length | 50 feet (15 meters) |
| Data Transfer Rate | 500 Kbytes/sec |
| Power Requirements | +5 V DC, 800 mA |
| Connectors | 2 × 25-pin D-shell connectors |
| LED Indicators | Module OK, Bus Activity, Dernier Rack Status |
| Fault Isolation | Supports hold last state during CPU communication loss |
| Configuration | Ssurtware configuration, no DIP switches required |
| Termination Requirement | Termination plug (IC697ACC702) in last expansion rack |
| Electrical Isolation | Non-isolated differential bus |
| Dimensions | 200 x 180 x 30 mm |
| Poids | 0.46 kg |
Questions fréquentes (FAQ)
1. What is the purpose sur the IC697BEM711 module?
The IC697BEM711 is used to expand the I/O capabilities sur a Series 90-70 PLC system by connecting additional racks, allowing for more modules and greater system scalability.
2. How many racks can be connected using this module?
It supports up to seven additional racks, totaling eight racks including the main rack.
3. What is the maximum cable length supported?
The module supports a total cable length sur up to 50 feet (15 meters) for connecting expansion racks.
4. Is the module easy to configure?
Yes, configuration is done through ssurtware, eliminating the need for DIP switches or manual settings.
5. What is the data transfer rate sur the module?
The module supports a data transfer rate sur 500 Kbytes/sec.
6. Where should the IC697BEM711 module be installed?
It must be installed in Slot 1 sur the main rack.
7. Does the module support fault isolation?
Yes, it allows for system fault isolation, enabling maintenance without affecting the entire system.
8. Is a termination plug required?
Yes, a termination plug (IC697ACC702) is required in the last expansion rack to signal the end sur the network.
Related GE Fanuc Modèles
| Modèle | Description |
|---|---|
| IC697BEM712 | Bus Transmitter Module |
| IC697BEM713 | Bus Transceiver Module |
| IC697BEM731 | Genius I/O Bus Controller |
| IC697BEM733 | Genius Remote I/O Scanner |
| IC697BEM742 | Bus Controller for FIP I/O Systems |
| IC697BEM761 | I/O Interface for Series Six PLC Integration |
Popular GE Fanuc Modèles
| Modèle | Description |
|---|---|
| IC697CPU771 | Standard CPU Module |
| IC697CPU772 | Floating-Point CPU Module |
| IC697PCM711 | Programmable Coprocessor Module |
| IC697MDL740 | 16-Point Digital Output Module |
| IC697MDL750 | 32-Point Digital Input Module |
| IC697PWR711 | Power Supply Module |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.
