产品介绍
The Epro CON021 + PR6424/002-030 is a high-performance eddy current sensor system designed for non-contact displacement, vibration, and axial position measurement in industrial rotating machinery. The system consists / the PR6424/002-030 probe, which has a 16 mm sensor tip, and the CON021 converter, which processes the signal and outputs a conditioned voltage compatible with industry-standard monitoring equipment.
This sensor pair is part / the Epro PR6424 series, widely used in critical applications such as turbines, compressors, pumps, and motors. It is optimized for precise gap measurements and reliable operation in high-temperature and high-vibration environments. The CON021 module ensures excellent linearity, temperature compensation, and compatibility with systems like the VM600, MMS6000, and other condition monitoring platforms.
产品规格
| Parameter | Specification |
|---|---|
| Product Name | PR6424/002-030 + CON021 |
| 制造商 | Epro / Emerson |
| Sensor Type | Eddy current non-contact displacement sensor |
| Sensor Head Diameter | 16 mm |
| Measurement Range | 0 to 2 mm |
| Linearity | ≤ ±1% / full-scale output |
| Converter 型号 | CON021 |
| Output Signal | 0 to -20 V DC (depending on system configuration) |
| Frequency Response | DC to 10 kHz |
| Material | Stainless steel probe and housing |
| Calibration Target | Steel DIN 1.7225 or equivalent |
| Vibration Limit | 100 m/s² continuous |
| Shock Limit | 500 m/s² |
| Temperature Range (Probe) | -35°C to +180°C |
| Temperature Range (CON021) | -25°C to +70°C |
| Environmental Protection | IP65 (sensor head) |
| Connector Type | Coaxial connector compatible with CON021 |
| Installation Thread | M14x1.5 or as specified by user |
| Insulation Resistance | >100 MΩ at 500 VDC |
| Compatibility | VM600, MMS6000, CSI 6500, and other monitoring systems |
| 重量 | 0.32 kg |
Product Applications
-
Shaft Vibration Monitoring: Ensures early detection / imbalance, misalignment, or mechanical looseness in rotating machinery.
-
Axial Thrust Positioning: Used in thrust bearing monitoring for turbines and compressors to detect axial displacement.
-
Critical Equipment Protection: Integrated in condition monitoring systems to trigger alarms or shutdowns before catastrophic failures.
-
Pump and Fan Monitoring: Non-contact vibration sensing in high-speed industrial pumps and fans.
-
Turbomachinery Diagnostics: Key component in OEM and retr/it vibration monitoring systems for gas and steam turbines.
-
Motor Shaft Displacement Monitoring: Enables real-time measurement / rotor movement in high-power motors.
Product Advantages
-
High-Precision Output: Offers highly accurate displacement readings with excellent linearity across the entire measurement range.
-
Industrial-Grade Build: Built from corrosion-resistant stainless steel, suitable for demanding mechanical and environmental conditions.
-
Wide Temperature Range: Operates reliably in environments with extreme thermal variations.
-
Non-联系我们 Technology: Minimizes wear, ensuring long operational life and high reliability.
-
Signal Integrity: The CON021 converter delivers stable, noise-free output for accurate diagnostics and data logging.
-
Plug-and-Play Integration: Fully compatible with industry-standard monitoring platforms including Emerson’s own VM600 system.
-
Flexible Mounting Options: 可用 with different thread types and mounting accessories for OEM and retr/it use.
-
Field-Proven Reliability: Trusted by energy, petrochemical, and manufacturing industries worldwide for rotating equipment protection.
FAQ
-
What is the standard output voltage range / the CON021 with the PR6424/002-030 sensor?
The output is typically 0 to -20 V DC, depending on calibration and system setup. -
Which materials are suitable as measurement targets for this sensor?
The sensor is optimized for conductive materials, primarily steel DIN 1.7225 or similar. -
Does the sensor require field calibration after installation?
Yes, calibration is recommended to ensure measurement accuracy based on target material and gap. -
Can the system detect both radial and axial displacements?
Yes, the detection orientation depends on installation; the same sensor can be used for either axial or radial monitoring. -
What is the frequency response / this sensor system?
The system responds to frequencies from DC up to 10 kHz, sufficient for most rotating machinery diagnostics. -
How does temperature affect the sensor’s accuracy?
The sensor is temperature-compensated, but extreme shifts may still introduce minor deviations if not recalibrated. -
Is the CON021 compatible with third-party monitoring systems?
Yes, it provides industry-standard analog voltage output and can be integrated with many third-party systems. -
What type / mounting threads are available for the PR6424/002-030?
The sensor typically uses M14x1.5 threads, but custom threads are available upon request. -
Does the system include protection against electromagnetic interference (EMI)?
Yes, both the sensor and converter are shielded and designed for operation in high-EMI industrial environments. -
Is the system suitable for high-vibration conditions?
Yes, it is rated for continuous vibration up to 100 m/s², making it suitable for turbines, compressors, and motors.
Related 型号s
| 型号 | 描述 | Probe Diameter | Measurement Range |
|---|---|---|---|
| PR6424/010-120 + CON011 | Standard 16 mm sensor for larger gaps | 16 mm | 0–4 mm |
| PR6424/014-040 + CON021 | High-temp version with enhanced range | 16 mm | 0–4 mm |
| PR6424/006-030 + CON021 | Compact 8 mm sensor for tighter spaces | 8 mm | 0–2 mm |
| PR6424/01CS + CON041 | Certified explosion-pro/ sensor | 16 mm | 0–4 mm |
| PR6424/000-010 + CON011 | Miniature 5 mm probe for short-range sensing | 5 mm | 0–1 mm |
| PR6424/012-040 + CON021 | Long-range version for large gaps | 25 mm | 0–8 mm |
Popular 型号s from Epro
| 型号 | 描述 | Application Area |
|---|---|---|
| PR6423/005-010 + CON021 | Eddy current sensor (8 mm) for compact applications | Pumps and small motors |
| MMS3120/022-100 | Vibration/position monitoring module | Turbomachinery control |
| PR9268/201-000 | Industrial piezoelectric accelerometer | Machinery vibration monitoring |
| MMS6110 | Monitoring system for dynamic signals | 状态 monitoring systems |
| TQ402 | Velocity transducer with integrated amplifier | Gearboxes and rotating parts |
| CON041 | Signal converter with explosion-pro/ certification | Hazardous zone installations |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。
