产品介绍
The Bently Nevada 330102-03-25-10-02-05 3300 XL 8 mm Proximity Probe is a high-precision sensor designed for industrial machinery vibration monitoring and shaft displacement measurement. It is part / the 3300 XL series, known for robustness, high reliability, and compatibility with critical rotating equipment systems. The probe uses eddy-current technology to accurately capture relative motion between the probe tip and the target, ensuring early detection / machinery faults.
This sensor is suitable for high-speed turbines, compressors, pumps, and generators, where precise measurement / shaft position and vibration is critical for predictive maintenance and avoiding unscheduled downtime.
Product Advantages
-
High Accuracy: Eddy-current sensing provides precise shaft position and vibration data.
-
Wide Temperature Range: Operates reliably under extreme industrial conditions.
-
Compatibility: Fully compatible with Bently Nevada 3300 XL monitoring systems.
-
Durability: Resistant to harsh environments, including high vibration and contamination.
-
Low Maintenance: Solid-state design reduces the need for frequent recalibration.
-
Early Fault Detection: 支持s predictive maintenance programs by detecting imbalance, misalignment, and bearing faults early.
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Proximity Probe |
| 零件号 | 330102-03-25-10-02-05 |
| Sensing Range | 0–0.25 inches (0–6.35 mm) |
| Probe Tip Diameter | 8 mm |
| Cable Type | Shielded twisted pair, armored or unarmored |
| Operating Temperature | -40°C to 120°C (-40°F to 248°F) |
| Output | Differential voltage (compatible with 3300 XL monitoring system) |
| Mounting | Threaded or compression fitting |
| Materials | Stainless steel housing, non-magnetic probe tip |
| Total Length | 1 m |
| 重量 | 0.323 kg |
| Response Frequency | DC to 25 kHz |
| Environmental Rating | IP67 |
| Connector | M12 or customer-specified |
Applications
-
Vibration monitoring / turbines, compressors, and pumps
-
Shaft displacement measurement in generators
-
状态-based monitoring in industrial machinery
-
Predictive maintenance programs for critical rotating equipment
-
Alignment verification and imbalance detection in mechanical systems
-
Integration with Bently Nevada 3300 XL monitoring systems
FAQ
Q1: What is the maximum vibration frequency this probe can accurately measure?
A1: The probe has a response frequency up to 25 kHz, suitable for high-speed rotating machinery.
Q2: Can the probe be used in explosive environments?
A2: Yes, when installed with appropriate intrinsically safe barriers or certified housings.
Q3: What type / cable termination is compatible with the probe?
A3: M12 connectors or shielded twisted-pair wiring compatible with 3300 XL modules.
Q4: How does the probe compensate for temperature variations?
A4: The probe incorporates temperature compensation in the sensor circuitry to maintain accuracy across -40°C to 120°C.
Q5: What is the maximum shaft excursion it can measure?
A5: The sensing range is up to 0.25 inches (6.35 mm) from the probe tip.
Q6: Can it detect both axial and radial displacement?
A6: It primarily measures radial displacement but can be arranged in dual configurations for axial monitoring.
Q7: How is signal integrity maintained over long cable runs?
A7: Using shielded twisted-pair cables and differential voltage outputs reduces electrical noise interference.
Q8: Is it compatible with older 3300 XL system models?
A8: Yes, it is backward compatible with most standard 3300 XL monitoring modules.
Q9: How does the probe perform in high-moisture environments?
A9: The IP67-rated housing ensures reliable operation in wet or humid industrial conditions.
Q10: What maintenance is required for the probe?
A10: Minimal; periodic visual inspection and cleaning / the probe tip to prevent debris accumulation.
Recommended 6 Same-Series or Related 型号s
| 型号 | 描述 | Sensing Range | Probe Tip |
|---|---|---|---|
| 330102-03-25-10-01-00 | 3300 XL 8 mm Proximity Probe | 0–0.25 in | 8 mm |
| 330102-03-25-10-02-00 | 3300 XL 8 mm Proximity Probe | 0–0.25 in | 8 mm |
| 330102-03-30-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.30 in | 8 mm |
| 330102-05-25-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.25 in | 8 mm |
| 330102-04-25-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.25 in | 8 mm |
| 330102-03-20-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.20 in | 8 mm |
Recommended 6 Popular 型号s from Bently Nevada
| 型号 | 描述 | Sensing Range | Probe Tip |
|---|---|---|---|
| 330102-00-16-90-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.16 in | 8 mm |
| 330102-00-90-10-02-00 | 3300 XL 8 mm Proximity Probe | 0–0.90 in | 8 mm |
| 330102-00-88-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.88 in | 8 mm |
| 330102-00-80-10-01-00 | 3300 XL 8 mm Proximity Probe | 0–0.80 in | 8 mm |
| 330102-00-79-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.79 in | 8 mm |
| 330102-05-25-10-01-05 | 3300 XL 8 mm Proximity Probe | 0–0.25 in | 8 mm |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。