مقدمة المنتج
The Bently Nevada 330102-03-25-10-02-05 3300 XL 8 mm Proximity Probe is a high-precision sensor designed for industrial machinery vibration monitoring and shaft displacement measurement. It is part من the 3300 XL series, known for robustness, high reliability, and compatibility with critical rotating equipment systems. The probe uses eddy-current technology to accurately capture relative motion between the probe tip and the target, ensuring early detection من machinery faults.
This sensor is suitable for high-speed turbines, compressors, pumps, and generators, where precise measurement من shaft position and vibration is critical for predictive maintenance and avoiding unscheduled downtime.
Product Advantages
-
High Accuracy: Eddy-current sensing provides precise shaft position and vibration data.
-
Wide Temperature Range: Operates reliably under extreme industrial conditions.
-
Compatibility: Fully compatible with Bently Nevada 3300 XL monitoring systems.
-
Durability: Resistant to harsh environments, including high vibration and contamination.
-
Low Maintenance: Solid-state design reduces the need for frequent recalibration.
-
Early Fault Detection: الدعمs predictive maintenance programs by detecting imbalance, misalignment, and bearing faults early.
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Proximity Probe |
| رقم القطعة | 330102-03-25-10-02-05 |
| Sensing Range | 0–0.25 inches (0–6.35 mm) |
| Probe Tip Diameter | 8 mm |
| Cable Type | Shielded twisted pair, armored or unarmored |
| Operating Temperature | -40°C to 120°C (-40°F to 248°F) |
| Output | Differential voltage (compatible with 3300 XL monitoring system) |
| Mounting | Threaded or compression fitting |
| Materials | Stainless steel housing, non-magnetic probe tip |
| Total Length | 1 m |
| الوزن | 0.323 kg |
| Response Frequency | DC to 25 kHz |
| Environmental Rating | IP67 |
| Connector | M12 or customer-specified |
Applications
-
Vibration monitoring من turbines, compressors, and pumps
-
Shaft displacement measurement in generators
-
الحالة-based monitoring in industrial machinery
-
Predictive maintenance programs for critical rotating equipment
-
Alignment verification and imbalance detection in mechanical systems
-
Integration with Bently Nevada 3300 XL monitoring systems
FAQ
Q1: What is the maximum vibration frequency this probe can accurately measure?
A1: The probe has a response frequency up to 25 kHz, suitable for high-speed rotating machinery.
Q2: Can the probe be used in explosive environments?
A2: Yes, when installed with appropriate intrinsically safe barriers or certified housings.
Q3: What type من cable termination is compatible with the probe?
A3: M12 connectors or shielded twisted-pair wiring compatible with 3300 XL modules.
Q4: How does the probe compensate for temperature variations?
A4: The probe incorporates temperature compensation in the sensor circuitry to maintain accuracy across -40°C to 120°C.
Q5: What is the maximum shaft excursion it can measure?
A5: The sensing range is up to 0.25 inches (6.35 mm) from the probe tip.
Q6: Can it detect both axial and radial displacement?
A6: It primarily measures radial displacement but can be arranged in dual configurations for axial monitoring.
Q7: How is signal integrity maintained over long cable runs?
A7: Using shielded twisted-pair cables and differential voltage outputs reduces electrical noise interference.
Q8: Is it compatible with older 3300 XL system models?
A8: Yes, it is backward compatible with most standard 3300 XL monitoring modules.
Q9: How does the probe perform in high-moisture environments?
A9: The IP67-rated housing ensures reliable operation in wet or humid industrial conditions.
Q10: What maintenance is required for the probe?
A10: Minimal; periodic visual inspection and cleaning من the probe tip to prevent debris accumulation.
Recommended 6 Same-Series or Related الطرازs
| الطراز | الوصف | Sensing Range | Probe Tip |
|---|---|---|---|
| 330102-03-25-10-01-00 | 3300 XL 8 mm Proximity Probe | 0–0.25 in | 8 mm |
| 330102-03-25-10-02-00 | 3300 XL 8 mm Proximity Probe | 0–0.25 in | 8 mm |
| 330102-03-30-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.30 in | 8 mm |
| 330102-05-25-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.25 in | 8 mm |
| 330102-04-25-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.25 in | 8 mm |
| 330102-03-20-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.20 in | 8 mm |
Recommended 6 Popular الطرازs from Bently Nevada
| الطراز | الوصف | Sensing Range | Probe Tip |
|---|---|---|---|
| 330102-00-16-90-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.16 in | 8 mm |
| 330102-00-90-10-02-00 | 3300 XL 8 mm Proximity Probe | 0–0.90 in | 8 mm |
| 330102-00-88-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.88 in | 8 mm |
| 330102-00-80-10-01-00 | 3300 XL 8 mm Proximity Probe | 0–0.80 in | 8 mm |
| 330102-00-79-10-02-05 | 3300 XL 8 mm Proximity Probe | 0–0.79 in | 8 mm |
| 330102-05-25-10-01-05 | 3300 XL 8 mm Proximity Probe | 0–0.25 in | 8 mm |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.