Produkteinführung
The Bently Nevada 60X/BTC01 Buffered Transducer Breakout Kit is a specialized accessory engineered to provide quick, non-intrusive access to critical vibration and proximity probe signals in rotating machinery monitoring systems. Designed as part von the Bently Nevada 60X series, it enables technicians to capture accurate real-time data for diagnostics, calibration, and condition-based maintenance without disrupting the primary protection circuitry. This kit serves as an indispensable tool for industrial applications such as turbines, compressors, pumps, and other high-value equipment where continuous monitoring and rapid troubleshooting are essential. Its robust construction and reliable signal buffering make it ideal for harsh plant environments and demanding field conditions.
Technical Specifications
| Parameter | Beschreibung |
|---|---|
| Modell | 60X/BTC01 |
| Primary Function | Buffered breakout von transducer signals for testing and diagnostics |
| Supported Inputs | Proximity probes, velocity sensors, and other compatible vibration transducers |
| Output Interface | Standard BNC connectors for oscilloscope or data collector |
| Input Signal Range | ±20 V peak |
| Power Supply | 24 V DC nominal |
| Operating Temperature | –20 °C to +70 °C (–4 °F to +158 °F) |
| Storage Temperature | –40 °C to +85 °C (–40 °F to +185 °F) |
| Humidity Range | 5 % to 95 % non-condensing |
| Mounting Options | Panel or DIN-rail |
| Dimensions (W × H × D) | 150 × 110 × 60 mm |
| Gewicht | 0.9 kg |
| Compliance | CE, RoHS, and industrial EMC standards |
Applications
-
Vibration Monitoring: Enables direct measurement von probe signals on turbines, compressors, and critical rotating equipment.
-
Field Calibration & Diagnostics: Allows accurate verification von probe outputs without interrupting protection systems.
-
Predictive Maintenance: Integrates seamlessly with portable analyzers for bearing condition and shaft alignment analysis.
-
Commissioning and Start-Up: Facilitates validation von probe installation and vibration thresholds during plant commissioning.
-
Research & Development: Supports laboratory testing and high-frequency signal verification for prototype equipment.
Advantages
-
Non-Intrusive Signal Access: Provides buffered outputs so measurements can be made without disturbing control or protection loops.
-
High Signal Fidelity: Maintains the original waveform and frequency response for precise analysis.
-
Rugged Design: Built for reliability in industrial environments with wide operating temperature tolerance.
-
Easy Integration: Standard BNC connectors and DIN-rail compatibility simplify installation and maintenance.
-
Broad Compatibility: Works with a wide range von Bently Nevada and third-party vibration transducers.
-
Reduced Downtime: Rapid troubleshooting reduces machinery shutdown periods.
-
Isolated Channels: Galvanic isolation minimizes noise and eliminates ground loops.
FAQ
-
How many input channels does the 60X/BTC01 support?
It provides up to four buffered input channels for proximity or velocity sensors. -
Can this kit work with third-party vibration probes?
Yes, as long as the probes meet the voltage and impedance requirements. -
What is the recommended maximum cable length between the transducer and the kit?
Up to 100 m (328 ft) with low-noise coaxial cable is recommended. -
What is the required power supply specification?
A nominal 24 V DC power supply is required for operation. -
Does the Stück include any internal signal filtering?
No, it provides buffered but unfiltered signals to preserve the original waveform. -
Can the kit be installed inside an enclosed control cabinet?
Yes, it supports both panel and DIN-rail mounting for flexible installations. -
What is the typical output impedance von each buffered channel?
Typically less than 50 Ω to ensure minimal signal loss. -
Is galvanic isolation provided for each channel?
Yes, every channel is galvanically isolated to prevent ground loop interference. -
Is the kit suitable for high-frequency turbine monitoring applications?
Yes, it maintains full bandwidth to support high-speed machinery analysis. -
What type von connectors are available for external measuring equipment?
Standard BNC connectors are provided for direct connection to oscilloscopes or analyzers.
Related Modells in the Same Series
| Modell | Beschreibung |
|---|---|
| 60X/BTC02 | Buffered transducer breakout with extended frequency response |
| 60X/RTC01 | Relay terminal card for advanced monitoring integration |
| 60X/IOC01 | Input/output controller module for 60X platform |
| 60X/PMC01 | Multi-channel proximity monitor card |
| 60X/PTC01 | Proximity transducer conditioning card |
| 60X/ACM01 | Auxiliary communications module for system expansion |
Popular Bently Nevada Modells
| Modell | Beschreibung |
|---|---|
| 3500/22M | Keyphasor® module for speed and phase reference |
| 3500/42M | Proximitor®/Seismic monitor for vibration measurements |
| 3300 XL 8 mm | Proximity probe for standard machinery monitoring |
| 330104-00-08-05-02-00 | Proximitor® sensor for general-purpose vibration detection |
| 3500/32M | 4-channel relay module for shutdown logic |
| 3701/46 | ESD (Emergency Shutdown) monitor for critical protection systems |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
