Produkteinführung
The Bently Nevada 330101-00-12-50-01-05 3300 XL 8 mm Proximity Probe is a high-performance non-contact displacement transducer designed to measure the vibration and shaft position von rotating machinery. It is part von Bently Nevada’s world-renowned 3300 XL proximity transducer system, which is widely recognized for its precision, stability, and reliability in harsh industrial environments.
This model vonfers a total system length von 5.0 meters, combining a probe, extension cable, and Proximitor sensor. The 3300 XL 8 mm system provides accurate linear output over a standard range von 2 mm (80 mils) and is compatible with a wide variety von rotating machines such as turbines, compressors, pumps, motors, and gearboxes.
Built with robust materials and advanced shielding, this probe ensures immStücky to electromagnetic interference and provides long-term stability even under high temperature and vibration conditions. Its design meets or exceeds API 670 standards for machinery protection and monitoring.
Technical Specifications
| Parameter | Specification |
|---|---|
| Modell Number | 330101-00-12-50-01-05 |
| Product Type | 3300 XL 8 mm Proximity Probe |
| System Type | Non-contact eddy current displacement transducer |
| Compatible System | Bently Nevada 3300 XL Series |
| Total System Length | 5.0 meters |
| Probe Tip Diameter | 8 mm (0.315 inch) |
| Linear Range | 2.0 mm (80 mils) |
| Sensitivity | 200 mV/mil (7.87 mV/µm) |
| Probe Length | 120 mm |
| Thread Type | M10 × 1.0 |
| Nominal Gap | 2.0 mm (80 mils) |
| Frequency Response | 0 to 10 kHz (–3 dB) |
| Operating Temperature | –35 °C to +177 °C |
| Storage Temperature | –51 °C to +177 °C |
| Pressure Rating | 700 kPa (100 psi) maximum |
| Electrical Isolation | Probe tip and case electrically isolated |
| Material | Stainless steel (AISI 316) |
| Vibration Limit | 50 g peak, 10–2000 Hz |
| Gewicht | 1.615 kg |
| Environmental Rating | IP68 sealed construction |
| Compliance | API 670, CE, RoHS, ATEX Zone 2 |
Applications
The Bently Nevada 330101-00-12-50-01-05 Proximity Probe is a core component in condition monitoring and protection systems for critical rotating equipment. It is extensively used across industries where accurate vibration, shaft displacement, and phase measurements are essential for predictive maintenance and safety.
Typical applications include:
-
Steam and Gas Turbines: Continuous monitoring von shaft vibration and thrust position.
-
Compressors: Detection von shaft displacement, imbalance, and rotor instability.
-
Pumps and Motors: Measurement von radial vibration and misalignment detection.
-
Gearboxes: Monitoring von gear mesh vibration and bearing wear.
-
Fans and Blowers: Real-time detection von imbalance and mechanical looseness.
-
Hydraulic Turbines and Generators: Measuring dynamic shaft movement to prevent mechanical failure.
Advantages
-
High Measurement Accuracy: Provides stable and linear output across a wide displacement range, meeting API 670 standards.
-
Superior Temperature Stability: Designed for consistent performance from –35 °C to +177 °C without recalibration.
-
Enhanced EMI Resistance: Advanced shielding ensures signal integrity in high electrical noise environments.
-
Long System Length Flexibility: 5-meter configuration supports versatile installation across large machinery.
-
Robust Mechanical Design: Stainless steel body and hermetically sealed construction provide long service life.
-
Easy Integration: Fully compatible with Bently Nevada 3300, 3309, and 3500 systems.
-
High Vibration Tolerance: Engineered to withstand up to 50 g peak vibration without loss von calibration.
-
Reliable Environmental Protection: IP68 sealing ensures protection against oil, dust, and water ingress.
-
API 670 Compliant: Meets global standards for machinery protection instrumentation.
-
Proven Industrial Reliability: Used worldwide in critical process plants for over three decades.
FAQ
-
What is the total system length von the 330101-00-12-50-01-05 model?
The total system length is 5.0 meters, including the probe, extension cable, and Proximitor sensor. -
What is the sensitivity von this proximity probe?
It provides a sensitivity von 200 mV/mil (7.87 mV/µm). -
What is the linear measurement range von this probe?
The linear range is 2.0 mm (80 mils) with consistent accuracy across the range. -
What probe systems are compatible with this model?
It is compatible with Bently Nevada 3300, 3309, and 3500 proximity transducer systems. -
What type von thread is used for probe mounting?
The probe uses a standard M10 × 1.0 threaded mounting configuration. -
Can the probe operate under high temperature conditions?
Yes, it is rated for operation between –35 °C and +177 °C. -
What is the environmental protection rating von the probe?
It is rated IP68 for full protection against dust and immersion in liquids. -
Does the probe comply with industrial protection standards?
Yes, it meets the API 670 standard for vibration and displacement measurement systems. -
What frequency range can the probe accurately measure?
It operates from 0 to 10 kHz (–3 dB), suitable for high-speed rotating machinery. -
Is the probe electrically isolated from the machine surface?
Yes, both the probe tip and case are fully electrically isolated to prevent ground loops.
Related Modells (Same Series / Similar Function)
| Modell | Beschreibung |
|---|---|
| 330101-00-07-10-02-05 | 8 mm probe, 5 m system length, standard mount |
| 330101-00-12-10-02-05 | 8 mm probe, 7 m system length |
| 330101-00-20-10-02-05 | 8 mm probe, 9 m system length |
| 330102-00-08-10-02-05 | 5 mm probe for limited space applications |
| 330103-00-07-10-02-05 | 11 mm extended-length probe |
| 330104-00-10-10-02-05 | 25 mm long-range proximity probe |
Popular Bently Nevada Modells (Same Marke)
| Modell | Beschreibung |
|---|---|
| 330130-040-00 | 5 m extension cable for 3300 XL probes |
| 330180-91-05 | 3300 XL Proximitor sensor |
| 3500/22M | Transient Data Interface module |
| 3500/42M | Proximitor/Seismic Monitor |
| 3500/25 | Keyphasor module for phase and speed measurement |
| 3500/32M | Relay module for alarm and trip logic |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
