产品介绍
The Epro PR6424/012-000 is a robust, non-contact eddy current proximity sensor designed to measure shaft displacement, vibration, and axial position in industrial rotating machinery. Developed by EPRO (now under Emerson), this model features a 16 mm diameter probe and is intended for use in conjunction with the CON011 converter, making it a core component / Epro’s machinery condition monitoring and protection systems.
Engineered to perform under extreme conditions, the PR6424/012-000 /fers exceptional stability, linear output, and resistance to temperature fluctuations, oil ingress, and electrical noise. The sensor plays a vital role in machinery protection systems compliant with API 670, especially in turbomachinery and heavy-duty rotating equipment. This particular model is factory-calibrated and optimized for applications requiring longer sensing distances and high measurement precision.
产品规格
| Parameter | 描述 |
|---|---|
| 型号 | PR6424/012-000 |
| Sensor Type | Eddy Current Proximity Sensor |
| 制造商 | EPRO / Emerson |
| Probe Diameter | 16 mm |
| Sensing Range | Typically ±2 mm (linear), total range ~4 mm |
| Sensitivity | Approx. 7.87 mV/µm (with CON011) |
| Frequency Response | DC to 10 kHz (±3 dB) |
| Target Material | Ferromagnetic (e.g., 4140 steel) |
| Mounting Thread | M14 x 1.5 |
| Cable Option | No integral cable (cable and connector are separate) |
| Operating Temperature | -35°C to +180°C (depending on accessories and mounting) |
| Environmental Protection | IP65 sensor tip (when properly installed) |
| Material (Housing) | Stainless Steel AISI 303 |
| Connector Type | For connection to CON011 converter |
| Insulation Resistance | >100 MΩ @ 500 VDC |
| System Compatibility | CON011, MMS 3000/6000 Series |
| Compliance | Meets API 670, CE, RoHS |
| 重量 | 0.2 kg |
Product Applications
The PR6424/012-000 is widely adopted in critical industrial applications where accurate, non-contact measurement / dynamic shaft motion is vital. Common use cases include:
-
Steam and Gas Turbines: Monitoring radial shaft vibration and thrust position.
-
Compressors and Blowers: Vibration tracking and misalignment detection in centrifugal equipment.
-
Industrial Pumps: Monitoring shaft displacement and early detection / mechanical wear.
-
Electric Motors: Assessing unbalance and rotor position in high-speed motor applications.
-
Gearboxes: Monitoring bearing wear and gear mesh issues in rotating gear assemblies.
-
OEM Integration: Embedded in skid-mounted or custom industrial systems requiring API compliance.
Product Advantages
-
Precision Measurement: Offers stable, linear output with low drift across temperature ranges.
-
API 670 Compliance: Fully supports the standard for critical rotating machinery protection.
-
Robust Mechanical Design: Stainless steel body with high mechanical durability and long operational life.
-
Modular System Integration: Seamlessly connects with CON011 converters and Epro monitoring systems.
-
Environmental Resistance: Designed to resist oil, moisture, vibration, and electromagnetic interference.
-
Wide Temperature Range: Operates in high-temperature environments, reducing the need for special housings.
常见问题 (FAQ)
-
Q: What is the difference between PR6424/012-000 and PR6424/011-100?
A: Both have 16 mm probes, but differ in cable configuration and factory calibration for cable length. -
Q: Does this sensor include a cable?
A: No, PR6424/012-000 is supplied without an integral cable; a separate cable is connected to the CON011 converter. -
Q: Can I use this sensor with a third-party monitoring system?
A: It is optimized for use with EPRO CON011 and MMS systems. Integration with third-party systems may require signal adaptation. -
Q: What is the maximum temperature it can handle?
A: Up to 180°C, depending on accessories such as high-temperature cables and mounting configurations. -
Q: Is this sensor compliant with API 670?
A: Yes, it fully meets API 670 requirements for critical rotating machinery monitoring. -
Q: What types / materials can this sensor measure?
A: It is designed to measure displacement from ferromagnetic materials like steel (e.g., AISI 4140). -
Q: Is the sensor tip oil-resistant?
A: Yes, the sensor is sealed and rated IP65 at the tip, making it resistant to oil and moisture when properly installed. -
Q: What happens if I exceed the sensing range?
A: Exceeding the range can lead to inaccurate readings or signal clipping. Always install within the specified gap. -
Q: Can the sensor be used in underwater applications?
A: No, it is not rated for continuous submersion. Use with sealed housings or enclosures for such environments. -
Q: Is recalibration needed after installation?
A: No, the sensor is factory-calibrated. However, system calibration is recommended if components are replaced or relocated.
Related 型号s (Same Series or Application)
| 型号 | 描述 | Probe Size | Cable Option | Use Case |
|---|---|---|---|---|
| PR6424/011-100 | 16 mm probe with fixed cable (10 m) | 16 mm | Yes | Extended range, turbine use |
| PR6424/014-040 | 16 mm sensor with 4 m cable | 16 mm | Yes | Pumps and compressors |
| PR6424/010-000 | 16 mm sensor without cable | 16 mm | No | Custom integration |
| PR6424/017-030 | Side-exit sensor with 3 m cable | 16 mm | Yes | Limited clearance spaces |
| PR6424/015-100 | High-temp 10 m cable variant | 16 mm | Yes | Harsh environment |
| PR6423/002-030 | 8 mm eddy current sensor with 3 m cable | 8 mm | Yes | Compact machinery |
Popular 型号s from the Same 品牌 (EPRO / Emerson)
| 型号 | 描述 | Function | Typical Application |
|---|---|---|---|
| PR6423/005-010 | 8 mm probe with CON021 converter | Eddy Current Sensor | Medium-scale rotating machinery |
| PR6424/018-000 | 16 mm short version sensor | Eddy Current Sensor | Space-constrained installations |
| CON011 | Signal converter for PR6423/PR6424 series | Signal Processing Module | Converts probe signal to voltage |
| MMS3120/022-100 | Monitoring system for condition monitoring | Monitoring System | Machine protection systems |
| PR9268/301-000 | Velocity sensor (piezoelectric) | Vibration Sensor | Bearing condition monitoring |
| MMS6110 | Advanced machine monitoring module | Monitoring System | Vibration + process parameter logging |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。
