مقدمة المنتج
The Epro PR6424/012-000 is a robust, non-contact eddy current proximity sensor designed to measure shaft displacement, vibration, and axial position in industrial rotating machinery. Developed by EPRO (now under Emerson), this model features a 16 mm diameter probe and is intended for use in conjunction with the CON011 converter, making it a core component من Epro’s machinery condition monitoring and protection systems.
Engineered to perform under extreme conditions, the PR6424/012-000 منfers exceptional stability, linear output, and resistance to temperature fluctuations, oil ingress, and electrical noise. The sensor plays a vital role in machinery protection systems compliant with API 670, especially in turbomachinery and heavy-duty rotating equipment. This particular model is factory-calibrated and optimized for applications requiring longer sensing distances and high measurement precision.
مواصفات المنتج
| Parameter | الوصف |
|---|---|
| الطراز | PR6424/012-000 |
| Sensor Type | Eddy Current Proximity Sensor |
| الشركة المصنعة | EPRO / Emerson |
| Probe Diameter | 16 mm |
| Sensing Range | Typically ±2 mm (linear), total range ~4 mm |
| Sensitivity | Approx. 7.87 mV/µm (with CON011) |
| Frequency Response | DC to 10 kHz (±3 dB) |
| Target Material | Ferromagnetic (e.g., 4140 steel) |
| Mounting Thread | M14 x 1.5 |
| Cable Option | No integral cable (cable and connector are separate) |
| Operating Temperature | -35°C to +180°C (depending on accessories and mounting) |
| Environmental Protection | IP65 sensor tip (when properly installed) |
| Material (Housing) | Stainless Steel AISI 303 |
| Connector Type | For connection to CON011 converter |
| Insulation Resistance | >100 MΩ @ 500 VDC |
| System Compatibility | CON011, MMS 3000/6000 Series |
| Compliance | Meets API 670, CE, RoHS |
| الوزن | 0.2 kg |
Product Applications
The PR6424/012-000 is widely adopted in critical industrial applications where accurate, non-contact measurement من dynamic shaft motion is vital. Common use cases include:
-
Steam and Gas Turbines: Monitoring radial shaft vibration and thrust position.
-
Compressors and Blowers: Vibration tracking and misalignment detection in centrifugal equipment.
-
Industrial Pumps: Monitoring shaft displacement and early detection من mechanical wear.
-
Electric Motors: Assessing unbalance and rotor position in high-speed motor applications.
-
Gearboxes: Monitoring bearing wear and gear mesh issues in rotating gear assemblies.
-
OEM Integration: Embedded in skid-mounted or custom industrial systems requiring API compliance.
Product Advantages
-
Precision Measurement: Offers stable, linear output with low drift across temperature ranges.
-
API 670 Compliance: Fully supports the standard for critical rotating machinery protection.
-
Robust Mechanical Design: Stainless steel body with high mechanical durability and long operational life.
-
Modular System Integration: Seamlessly connects with CON011 converters and Epro monitoring systems.
-
Environmental Resistance: Designed to resist oil, moisture, vibration, and electromagnetic interference.
-
Wide Temperature Range: Operates in high-temperature environments, reducing the need for special housings.
الأسئلة الشائعة (FAQ)
-
Q: What is the difference between PR6424/012-000 and PR6424/011-100?
A: Both have 16 mm probes, but differ in cable configuration and factory calibration for cable length. -
Q: Does this sensor include a cable?
A: No, PR6424/012-000 is supplied without an integral cable; a separate cable is connected to the CON011 converter. -
Q: Can I use this sensor with a third-party monitoring system?
A: It is optimized for use with EPRO CON011 and MMS systems. Integration with third-party systems may require signal adaptation. -
Q: What is the maximum temperature it can handle?
A: Up to 180°C, depending on accessories such as high-temperature cables and mounting configurations. -
Q: Is this sensor compliant with API 670?
A: Yes, it fully meets API 670 requirements for critical rotating machinery monitoring. -
Q: What types من materials can this sensor measure?
A: It is designed to measure displacement from ferromagnetic materials like steel (e.g., AISI 4140). -
Q: Is the sensor tip oil-resistant?
A: Yes, the sensor is sealed and rated IP65 at the tip, making it resistant to oil and moisture when properly installed. -
Q: What happens if I exceed the sensing range?
A: Exceeding the range can lead to inaccurate readings or signal clipping. Always install within the specified gap. -
Q: Can the sensor be used in underwater applications?
A: No, it is not rated for continuous submersion. Use with sealed housings or enclosures for such environments. -
Q: Is recalibration needed after installation?
A: No, the sensor is factory-calibrated. However, system calibration is recommended if components are replaced or relocated.
Related الطرازs (Same Series or Application)
| الطراز | الوصف | Probe Size | Cable Option | Use Case |
|---|---|---|---|---|
| PR6424/011-100 | 16 mm probe with fixed cable (10 m) | 16 mm | Yes | Extended range, turbine use |
| PR6424/014-040 | 16 mm sensor with 4 m cable | 16 mm | Yes | Pumps and compressors |
| PR6424/010-000 | 16 mm sensor without cable | 16 mm | No | Custom integration |
| PR6424/017-030 | Side-exit sensor with 3 m cable | 16 mm | Yes | Limited clearance spaces |
| PR6424/015-100 | High-temp 10 m cable variant | 16 mm | Yes | Harsh environment |
| PR6423/002-030 | 8 mm eddy current sensor with 3 m cable | 8 mm | Yes | Compact machinery |
Popular الطرازs from the Same العلامة التجارية (EPRO / Emerson)
| الطراز | الوصف | Function | Typical Application |
|---|---|---|---|
| PR6423/005-010 | 8 mm probe with CON021 converter | Eddy Current Sensor | Medium-scale rotating machinery |
| PR6424/018-000 | 16 mm short version sensor | Eddy Current Sensor | Space-constrained installations |
| CON011 | Signal converter for PR6423/PR6424 series | Signal Processing Module | Converts probe signal to voltage |
| MMS3120/022-100 | Monitoring system for condition monitoring | Monitoring System | Machine protection systems |
| PR9268/301-000 | Velocity sensor (piezoelectric) | Vibration Sensor | Bearing condition monitoring |
| MMS6110 | Advanced machine monitoring module | Monitoring System | Vibration + process parameter logging |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.
