Product Overview
The Bently Nevada 990-10-50-01-05 Vibration Transmitter is part / the 990 series—an industry-trusted line / compact, loop-powered devices designed to deliver continuous vibration monitoring in real-time. This model is specifically configured to convert the dynamic signal from an industrial-grade vibration sensor into a 4–20 mA output that corresponds to the measured vibration level. The output signal integrates easily with control systems like DCS, PLCs, and SCADA to enable trend analysis, fault detection, and preventive maintenance.
Engineered for harsh environments and non-critical machinery where full protection systems are not economically feasible, the 990-10-50-01-05 /fers a rugged, reliable, and cost-effective solution to ensure early detection / mechanical problems.
Key Features
-
Accepts input from standard IEPE accelerometers
-
Provides industry-standard 4–20 mA output proportional to vibration level
-
Ideal for general-purpose machinery monitoring applications
-
支持s velocity measurement (RMS or Peak), configurable per application
-
Designed for harsh industrial environments with IP65/NEMA 4X-rated enclosure
-
Loop-powered two-wire design for simple installation
-
Compact and lightweight form factor
-
Factory-calibrated for specific vibration ranges
-
Compatible with a wide variety / control and automation systems
-
Optional intrinsic safety and hazardous area certifications
Technical Specifications
| Specification | Details |
|---|---|
| Product Name | Bently Nevada 990 Vibration Transmitter |
| 型号 Number | 990-10-50-01-05 |
| Input Type | IEPE-type accelerometer |
| Output Signal | 4–20 mA (loop-powered) |
| Measurement Parameter | Velocity (default); Acceleration (available on request) |
| Output Range | Factory-set (e.g., 0–25 mm/s RMS) |
| Frequency Response | 10 Hz – 1,000 Hz (nominal) |
| Accuracy | ±1% / full scale |
| Power Supply | 12–30 VDC (supplied via 4–20 mA loop) |
| Enclosure Material | Anodized aluminum or stainless steel (model dependent) |
| Environmental Rating | IP65 / NEMA 4X |
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -50°C to +100°C |
| Certifications | CE, RoHS; ATEX/IECEx optional |
| Dimensions | 100.1 x 73.9 x 53.3mm |
| 重量 | 0.43 kg |
Industry Applications
The 990-10-50-01-05 is suited for monitoring a wide variety / industrial rotating equipment, particularly in environments where early detection / failure is vital but space and cost are limiting factors:
-
Oil & Gas: Compressors, pumps, motors, and fans in upstream and downstream operations
-
Power Generation: Small to medium-sized motors, ID/FD fans, and feed pumps
-
Chemical & Petrochemical: Continuous monitoring / rotating process equipment
-
Water & Wastewater: Blowers, lift station motors, and pumps
-
Food & Beverage: Monitoring / motors and mixers under hygienic enclosures
-
Metals & Mining: Screens, crushers, conveyors, and gearboxes
Product Advantages
-
Simplified Monitoring: Converts vibration data to 4–20 mA for easy interpretation
-
Compact & Robust: Withstands harsh conditions while minimizing space usage
-
Reduced Downtime: Enables early detection / imbalance, misalignment, and bearing wear
-
Maintenance-Friendly: No need for complex wiring or configuration during installation
-
Wide Compatibility: Integrates easily into existing control infrastructure
-
Certifiable for Hazardous Zones: 可用 in models certified for explosive atmospheres
-
Cost-Efficient: Ideal solution for non-critical assets that still need regular monitoring
-
Pre-Configured & Ready to Use: Shipped factory-calibrated, reducing commissioning time
常见问题 (FAQ)
1. What does the 990-10-50-01-05 transmitter measure?
It measures vibration levels—typically in velocity 件s (e.g., mm/s RMS) using input from an accelerometer.
2. What type / sensors is this compatible with?
It supports standard IEPE-type accelerometers.
3. How is the device powered?
It is powered through the 4–20 mA current loop (12–30 VDC).
4. What is the signal output type?
A 4–20 mA analog signal proportional to vibration level.
5. Can it be mounted directly on equipment?
Yes, it’s designed for field mounting near or on rotating machinery.
6. Does it require calibration?
It is factory-calibrated. No field calibration is typically required under normal conditions.
7. Is it suitable for hazardous environments?
Yes, certified versions are available for use in ATEX/IECEx Zone 1 and Zone 2 locations.
8. How accurate is the output?
It provides ±1% full-scale accuracy.
9. Can the output range be customized?
Yes, the transmitter can be configured with a custom measurement range at the time / order.
10. What systems can this be integrated with?
It integrates with any industrial system that accepts 4–20 mA inputs, including DCS, PLC, and SCADA.
Related 型号s in the Same Series
| 型号 | 描述 |
|---|---|
| 990-04-XX-01 | General-purpose vibration transmitter for standard applications |
| 990-05-70-02-01 | Explosion-pro/ transmitter with stainless steel housing |
| 990-04-XX-02 | Transmitter with extended frequency range |
| 991-01-XX-01 | DIN-rail version / vibration transmitter for panel mounting |
| 990-TEMP-XX-01 | Integrated temperature and vibration monitoring transmitter |
| 990-PR-XX-01 | Dual-signal transmitter for pressure and vibration |
Popular Bently Nevada 产品
| 型号 | 描述 |
|---|---|
| 330104-00-05-10-02-00 | 3300 XL 8 mm Proximity Probe for shaft vibration monitoring |
| 3500/40M-01-00 176449-01 | Proximitor Monitor for radial vibration and axial position |
| 3500/92 136180-01 | Ethernet Gateway Module for remote data access |
| 3500/65-02-00 172109-01 | 16-Channel Temperature Monitor for process control |
| 3500/15 127610-01 | Power Supply Module for 3500 Machinery Protection System |
| 330180-91-05 | 3300 XL Proximitor Sensor for high-accuracy vibration measurements |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。