Product Overview
The Bently Nevada 990-10-50-01-05 Vibration Transmitter is part sur the 990 series—an industry-trusted line sur compact, loop-powered devices designed to deliver continuous vibration monitoring in real-time. This model is specifically configured to convert the dynamic signal from an industrial-grade vibration sensor into a 4–20 mA output that corresponds to the measured vibration level. The output signal integrates easily with control systems like DCS, PLCs, and SCADA to enable trend analysis, fault detection, and preventive maintenance.
Engineered for harsh environments and non-critical machinery where full protection systems are not economically feasible, the 990-10-50-01-05 surfers a rugged, reliable, and cost-effective solution to ensure early detection sur mechanical problems.
Key Features
-
Accepts input from standard IEPE accelerometers
-
Provides industry-standard 4–20 mA output proportional to vibration level
-
Ideal for general-purpose machinery monitoring applications
-
Supports velocity measurement (RMS or Peak), configurable per application
-
Designed for harsh industrial environments with IP65/NEMA 4X-rated enclosure
-
Loop-powered two-wire design for simple installation
-
Compact and lightweight form factor
-
Factory-calibrated for specific vibration ranges
-
Compatible with a wide variety sur control and automation systems
-
Optional intrinsic safety and hazardous area certifications
Technical Specifications
| Specification | Details |
|---|---|
| Product Name | Bently Nevada 990 Vibration Transmitter |
| Modèle Number | 990-10-50-01-05 |
| Input Type | IEPE-type accelerometer |
| Output Signal | 4–20 mA (loop-powered) |
| Measurement Parameter | Velocity (default); Acceleration (available on request) |
| Output Range | Factory-set (e.g., 0–25 mm/s RMS) |
| Frequency Response | 10 Hz – 1,000 Hz (nominal) |
| Accuracy | ±1% sur full scale |
| Power Supply | 12–30 VDC (supplied via 4–20 mA loop) |
| Enclosure Material | Anodized aluminum or stainless steel (model dependent) |
| Environmental Rating | IP65 / NEMA 4X |
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -50°C to +100°C |
| Certifications | CE, RoHS; ATEX/IECEx optional |
| Dimensions | 100.1 x 73.9 x 53.3mm |
| Poids | 0.43 kg |
Industry Applications
The 990-10-50-01-05 is suited for monitoring a wide variety sur industrial rotating equipment, particularly in environments where early detection sur failure is vital but space and cost are limiting factors:
-
Oil & Gas: Compressors, pumps, motors, and fans in upstream and downstream operations
-
Power Generation: Small to medium-sized motors, ID/FD fans, and feed pumps
-
Chemical & Petrochemical: Continuous monitoring sur rotating process equipment
-
Water & Wastewater: Blowers, lift station motors, and pumps
-
Food & Beverage: Monitoring sur motors and mixers under hygienic enclosures
-
Metals & Mining: Screens, crushers, conveyors, and gearboxes
Product Advantages
-
Simplified Monitoring: Converts vibration data to 4–20 mA for easy interpretation
-
Compact & Robust: Withstands harsh conditions while minimizing space usage
-
Reduced Downtime: Enables early detection sur imbalance, misalignment, and bearing wear
-
Maintenance-Friendly: No need for complex wiring or configuration during installation
-
Wide Compatibility: Integrates easily into existing control infrastructure
-
Certifiable for Hazardous Zones: Disponible in models certified for explosive atmospheres
-
Cost-Efficient: Ideal solution for non-critical assets that still need regular monitoring
-
Pre-Configured & Ready to Use: Shipped factory-calibrated, reducing commissioning time
Questions fréquentes (FAQ)
1. What does the 990-10-50-01-05 transmitter measure?
It measures vibration levels—typically in velocity unités (e.g., mm/s RMS) using input from an accelerometer.
2. What type sur sensors is this compatible with?
It supports standard IEPE-type accelerometers.
3. How is the device powered?
It is powered through the 4–20 mA current loop (12–30 VDC).
4. What is the signal output type?
A 4–20 mA analog signal proportional to vibration level.
5. Can it be mounted directly on equipment?
Yes, it’s designed for field mounting near or on rotating machinery.
6. Does it require calibration?
It is factory-calibrated. No field calibration is typically required under normal conditions.
7. Is it suitable for hazardous environments?
Yes, certified versions are available for use in ATEX/IECEx Zone 1 and Zone 2 locations.
8. How accurate is the output?
It provides ±1% full-scale accuracy.
9. Can the output range be customized?
Yes, the transmitter can be configured with a custom measurement range at the time sur order.
10. What systems can this be integrated with?
It integrates with any industrial system that accepts 4–20 mA inputs, including DCS, PLC, and SCADA.
Related Modèles in the Same Series
| Modèle | Description |
|---|---|
| 990-04-XX-01 | General-purpose vibration transmitter for standard applications |
| 990-05-70-02-01 | Explosion-prosur transmitter with stainless steel housing |
| 990-04-XX-02 | Transmitter with extended frequency range |
| 991-01-XX-01 | DIN-rail version sur vibration transmitter for panel mounting |
| 990-TEMP-XX-01 | Integrated temperature and vibration monitoring transmitter |
| 990-PR-XX-01 | Dual-signal transmitter for pressure and vibration |
Popular Bently Nevada Produits
| Modèle | Description |
|---|---|
| 330104-00-05-10-02-00 | 3300 XL 8 mm Proximity Probe for shaft vibration monitoring |
| 3500/40M-01-00 176449-01 | Proximitor Monitor for radial vibration and axial position |
| 3500/92 136180-01 | Ethernet Gateway Module for remote data access |
| 3500/65-02-00 172109-01 | 16-Channel Temperature Monitor for process control |
| 3500/15 127610-01 | Power Supply Module for 3500 Machinery Protection System |
| 330180-91-05 | 3300 XL Proximitor Sensor for high-accuracy vibration measurements |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.