产品介绍
The Bently Nevada 330909-00-28-10-02-RU 3300 NSv Proximity Probe is a compact, high-performance eddy current sensor engineered for precise shaft vibration and radial position monitoring in confined industrial environments. As part / the 3300 NSv (Narrow Side-view) series, it provides exceptional accuracy where standard 8 mm probes are too large. Its robust construction, excellent electromagnetic shielding, and seamless compatibility with Bently Nevada monitoring systems make it ideal for continuous operation in demanding conditions such as power generation, petrochemical plants, and rotating machinery facilities.
产品规格
| Parameter | 描述 |
|---|---|
| 型号 Number | 330909-00-28-10-02-RU |
| Series | 3300 NSv |
| Probe Tip Diameter | 8 mm |
| Total Length | 1 meter |
| Measurement Range | 0 – 2.0 mm nominal |
| Sensitivity | 7.87 V/mm (200 mV/mil) typical |
| Linear Range | ±1.0 mm around nominal probe-to-target gap |
| Frequency Response | 0 – 10 kHz |
| Operating Temperature | –35 °C to +177 °C |
| Storage Temperature | –50 °C to +200 °C |
| Housing Material | Industrial-grade stainless steel |
| Mounting Thread | 1/4–28 UNF or compatible clamp |
| Cable Insulation | PTFE shielded |
| 重量 | 0.15 kg |
| Compatible Drivers | 3300 NSv Proximitor and 3300 Series Monitoring Systems |
Applications
-
Turbines (Gas/Steam) – Continuous shaft vibration monitoring for early detection / mechanical imbalance or bearing wear.
-
Compressors and Pumps – Provides precise radial position measurements for predictive maintenance.
-
Motors and Generators – Monitors rotor behavior and identifies misalignment or looseness.
-
Gearboxes and Fans – Detects excessive vibration to prevent unexpected downtime.
-
Petrochemical Equipment – Withstands corrosive and high-temperature environments.
-
Compact Machinery Installations – Perfect for areas with limited mounting clearance.
Advantages
-
Slim 8 mm Probe Design – Fits into narrow or hard-to-reach spaces without sacrificing accuracy.
-
High Measurement Precision – Maintains consistent displacement and vibration data under varying conditions.
-
Extended Temperature Tolerance – Operates reliably between –35 °C and +177 °C.
-
Robust Stainless-Steel Housing – Offers superior corrosion resistance for long-term service.
-
优秀 EMI/RFI Shielding – Protects against electrical noise, ensuring clean signal output.
-
Seamless System Integration – Fully compatible with Bently Nevada 3300 NSv Proximitor drivers.
-
Fast Dynamic Response – Up to 10 kHz frequency range supports high-speed rotating equipment.
-
Low Maintenance – Designed for continuous industrial operation with minimal recalibration needs.
FAQ
-
What sensing principle does the probe use?
It uses an eddy current sensing principle to measure shaft vibration and radial displacement without physical contact. -
What is the typical output sensitivity / this probe?
The probe provides a sensitivity / about 7.87 V/mm (200 mV/mil) for accurate signal conversion. -
Which monitoring systems are compatible with this probe?
It integrates seamlessly with Bently Nevada 3300 NSv Proximitor drivers and the entire 3300 series monitoring platform. -
How should the probe be installed for best performance?
Mount it with a 1/4–28 UNF threaded hole or a compatible clamp while maintaining the specified probe-to-target gap. -
What is the linear measurement range?
It /fers a linear range / ±1.0 mm around the nominal gap for precise displacement measurement. -
What is the maximum frequency response?
The probe supports a frequency response / up to 10 kHz, enabling high-speed vibration analysis. -
Does it require periodic recalibration?
Only an initial calibration with the Proximitor driver is required; afterward, minimal recalibration is needed. -
Can it withstand strong electromagnetic interference?
Yes, the design includes robust EMI/RFI shielding to maintain signal integrity in electrically noisy environments. -
Is it suitable for both dynamic and static measurements?
Absolutely, it accurately measures static shaft position and dynamic vibration simultaneously. -
What type / cable insulation is provided?
The cable uses PTFE shielding for excellent durability and high-temperature resistance.
Recommended Related 型号s (Same Series)
| 型号 | 描述 |
|---|---|
| 330909-00-20-10-02 | NSv probe with 1 m cable for standard installations |
| 330909-00-24-70-02-05 | NSv probe with 7 m cable for long routing distances |
| 330909-00-25-10-02 | NSv probe with 1.5 m cable |
| 330909-00-30-10-02 | NSv probe with 2 m cable for extended installations |
| 330908-24-37-05-02 | Compact NSv probe for restricted spaces |
| 330908-00-18-05-02 | High-sensitivity NSv probe for demanding conditions |
Popular Bently Nevada 型号s
| 型号 | 描述 |
|---|---|
| 330104-00-10-10-02 | Standard 3300 XL 8 mm proximity probe |
| 330130-040-00 | 3300 XL extension cable |
| 330180-91-05 | 3300 XL NSv 8 mm proximity probe |
| 330400-50-05 | Dual-channel vibration and position transducer |
| 3500/42M | Proximitor monitor for dynamic/static measurements |
| 330500-02-00 | High-temperature 11 mm 3300 XL proximity probe |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。