製品紹介
The Bently Nevada 330909-00-28-10-02-RU 3300 NSv Proximity Probe is a compact, high-performance eddy current sensor engineered for precise shaft vibration and radial position monitoring in confined industrial environments. As part / the 3300 NSv (Narrow Side-view) series, it provides exceptional accuracy where standard 8 mm probes are too large. Its robust construction, excellent electromagnetic shielding, and seamless compatibility with Bently Nevada monitoring systems make it ideal for continuous operation in demanding conditions such as power generation, petrochemical plants, and rotating machinery facilities.
製品仕様
| Parameter | 説明 |
|---|---|
| モデル Number | 330909-00-28-10-02-RU |
| Series | 3300 NSv |
| Probe Tip Diameter | 8 mm |
| Total Length | 1 meter |
| Measurement Range | 0 – 2.0 mm nominal |
| Sensitivity | 7.87 V/mm (200 mV/mil) typical |
| Linear Range | ±1.0 mm around nominal probe-to-target gap |
| Frequency Response | 0 – 10 kHz |
| Operating Temperature | –35 °C to +177 °C |
| Storage Temperature | –50 °C to +200 °C |
| Housing Material | Industrial-grade stainless steel |
| Mounting Thread | 1/4–28 UNF or compatible clamp |
| Cable Insulation | PTFE shielded |
| 重量 | 0.15 kg |
| Compatible Drivers | 3300 NSv Proximitor and 3300 Series Monitoring Systems |
Applications
-
Turbines (Gas/Steam) – Continuous shaft vibration monitoring for early detection / mechanical imbalance or bearing wear.
-
Compressors and Pumps – Provides precise radial position measurements for predictive maintenance.
-
Motors and Generators – Monitors rotor behavior and identifies misalignment or looseness.
-
Gearboxes and Fans – Detects excessive vibration to prevent unexpected downtime.
-
Petrochemical Equipment – Withstands corrosive and high-temperature environments.
-
Compact Machinery Installations – Perfect for areas with limited mounting clearance.
Advantages
-
Slim 8 mm Probe Design – Fits into narrow or hard-to-reach spaces without sacrificing accuracy.
-
High Measurement Precision – Maintains consistent displacement and vibration data under varying conditions.
-
Extended Temperature Tolerance – Operates reliably between –35 °C and +177 °C.
-
Robust Stainless-Steel Housing – Offers superior corrosion resistance for long-term service.
-
優良 EMI/RFI Shielding – Protects against electrical noise, ensuring clean signal output.
-
Seamless System Integration – Fully compatible with Bently Nevada 3300 NSv Proximitor drivers.
-
Fast Dynamic Response – Up to 10 kHz frequency range supports high-speed rotating equipment.
-
Low Maintenance – Designed for continuous industrial operation with minimal recalibration needs.
FAQ
-
What sensing principle does the probe use?
It uses an eddy current sensing principle to measure shaft vibration and radial displacement without physical contact. -
What is the typical output sensitivity / this probe?
The probe provides a sensitivity / about 7.87 V/mm (200 mV/mil) for accurate signal conversion. -
Which monitoring systems are compatible with this probe?
It integrates seamlessly with Bently Nevada 3300 NSv Proximitor drivers and the entire 3300 series monitoring platform. -
How should the probe be installed for best performance?
Mount it with a 1/4–28 UNF threaded hole or a compatible clamp while maintaining the specified probe-to-target gap. -
What is the linear measurement range?
It /fers a linear range / ±1.0 mm around the nominal gap for precise displacement measurement. -
What is the maximum frequency response?
The probe supports a frequency response / up to 10 kHz, enabling high-speed vibration analysis. -
Does it require periodic recalibration?
Only an initial calibration with the Proximitor driver is required; afterward, minimal recalibration is needed. -
Can it withstand strong electromagnetic interference?
Yes, the design includes robust EMI/RFI shielding to maintain signal integrity in electrically noisy environments. -
Is it suitable for both dynamic and static measurements?
Absolutely, it accurately measures static shaft position and dynamic vibration simultaneously. -
What type / cable insulation is provided?
The cable uses PTFE shielding for excellent durability and high-temperature resistance.
Recommended Related モデルs (Same Series)
| モデル | 説明 |
|---|---|
| 330909-00-20-10-02 | NSv probe with 1 m cable for standard installations |
| 330909-00-24-70-02-05 | NSv probe with 7 m cable for long routing distances |
| 330909-00-25-10-02 | NSv probe with 1.5 m cable |
| 330909-00-30-10-02 | NSv probe with 2 m cable for extended installations |
| 330908-24-37-05-02 | Compact NSv probe for restricted spaces |
| 330908-00-18-05-02 | High-sensitivity NSv probe for demanding conditions |
Popular Bently Nevada モデルs
| モデル | 説明 |
|---|---|
| 330104-00-10-10-02 | Standard 3300 XL 8 mm proximity probe |
| 330130-040-00 | 3300 XL extension cable |
| 330180-91-05 | 3300 XL NSv 8 mm proximity probe |
| 330400-50-05 | Dual-channel vibration and position transducer |
| 3500/42M | Proximitor monitor for dynamic/static measurements |
| 330500-02-00 | High-temperature 11 mm 3300 XL proximity probe |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。