产品介绍
The Bently Nevada 330193-00-08-10-00 3300 XL 8 mm Probe is a high-precision, non-contact proximity sensor designed to monitor shaft vibration, radial displacement, and rotor dynamics in critical rotating machinery. As a part / the 3300 XL series, this probe delivers accurate, stable, and reliable measurements in harsh industrial environments. Its advanced eddy-current sensing technology and rugged construction make it an essential component for predictive maintenance, machinery protection, and real-time diagnostic systems in power generation, petrochemical, and heavy industrial applications.
Product Parameters
| Parameter | Specification |
|---|---|
| 型号 | 330193-00-08-10-00 |
| Probe Type | 3300 XL 8 mm Proximity Probe |
| Measurement Range | 2 mm (80 mil) linear range |
| Sensitivity | 7.87 mV/µm (200 mV/mil) |
| Tip Diameter | 8 mm |
| Thread Type | M10 × 1 mm |
| Operating Temperature (Probe) | –35 °C to +200 °C |
| Operating Temperature (Cable/Conn.) | –51 °C to +177 °C |
| Frequency Response | 0 to 10 kHz |
| Vibration Tolerance | Up to 20 g, 10–2000 Hz |
| Shock Tolerance | Up to 200 g peak |
| Environmental Protection | IP67 |
| Total Length | 1 meter |
| 重量 | 0.323 kg |
Product Applications
-
Turbines: Continuous rotor vibration and displacement monitoring for gas and steam turbines.
-
Compressors & Pumps: Detects rotor imbalance, misalignment, and bearing wear for early maintenance interventions.
-
Motors & Generators: Provides real-time data for predictive maintenance and operational reliability.
-
Industrial Process Equipment: Ensures accurate monitoring in petrochemical, power generation, and heavy industrial machinery.
Product Advantages
-
High Precision: Provides accurate, linear output across the full 2 mm measurement range.
-
Wide Operating Temperature: Functions reliably from –35 °C to +200 °C.
-
Robust Construction: IP67-rated housing protects against dust, moisture, and contaminants.
-
Shielded Design: Reduces electromagnetic interference for consistent signal quality.
-
Shock & Vibration Resistance: Withstands high vibration and mechanical shock up to 200 g peak.
-
System Compatibility: Fully integrates with Bently Nevada 3300 XL Proximitor® sensors and monitoring systems.
FAQ
-
What is the nominal sensitivity / the 330193-00-08-10-00 probe?
The probe has a nominal sensitivity / 7.87 mV/µm (200 mV/mil), providing precise measurement / shaft vibration and displacement. -
Which monitoring systems support this probe?
It is compatible with Bently Nevada 3300 XL Proximitor® sensors and 3500 series monitoring modules. -
What is the operating temperature range for the probe and cable?
The probe operates from –35 °C to +200 °C, while the cable and connector are rated from –51 °C to +177 °C. -
How is the probe securely mounted on machinery?
The probe uses an M10 × 1 mm threaded body and locknut to ensure stable placement near the rotating shaft. -
What sensing principle does the probe use?
It uses eddy-current technology, generating a voltage proportional to the distance between the probe tip and the shaft surface. -
What level / continuous vibration can the probe tolerate?
The probe tolerates up to 20 g continuous vibration within a 10–2000 Hz frequency range. -
Does the probe comply with industrial protection standards?
Yes, it is IP67-rated, providing protection against dust ingress and temporary water immersion. -
What is the mechanical shock tolerance / this probe?
The probe can withstand mechanical shocks up to 200 g peak without affecting performance. -
How does the probe maintain signal stability in electrically noisy environments?
Shielded construction and high-quality materials minimize electromagnetic interference and temperature drift for reliable output. -
Can the probe measure both radial and axial motion?
Yes, it can accurately measure radial vibration and axial displacement for complete machinery diagnostics.
Related 型号s (Same Series or Similar)
| 型号 Number | 描述 |
|---|---|
| 330192-00-30-10-00 | 3300 XL 8 mm ETR Probe for standard vibration monitoring |
| 330192-00-70-05-CN | 3300 XL 8 mm ETR Probe with enhanced temperature tolerance |
| 330192-10-80-90-05 | 3300 XL 8 mm ETR Probe for extended industrial use |
| 330192-10-95-90-05 | 3300 XL 8 mm ETR Probe for heavy-duty equipment |
| 330193-00-02-10-00 | 3300 XL 8 mm Probe with alternate length configuration |
| 330192-00-50-05-00 | 3300 XL 8 mm ETR Probe with customized connector design |
Popular Bently Nevada 型号s
| 型号 Number | 描述 |
|---|---|
| 3500/22M | Transient Data Interface Module |
| 3300 XL 5 mm | Proximity Probe for compact installation |
| 3500/42M | Proximitor®/Seismic Monitor |
| 330130-040-00 | Standard Proximitor® Sensor |
| 3500/50 | Tachometer Module |
| 330180-90-05 | 3300 XL 11 mm Proximity Probe for large shaft targets |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。