مقدمة المنتج
The Bently Nevada 330193-00-08-10-00 3300 XL 8 mm Probe is a high-precision, non-contact proximity sensor designed to monitor shaft vibration, radial displacement, and rotor dynamics in critical rotating machinery. As a part من the 3300 XL series, this probe delivers accurate, stable, and reliable measurements in harsh industrial environments. Its advanced eddy-current sensing technology and rugged construction make it an essential component for predictive maintenance, machinery protection, and real-time diagnostic systems in power generation, petrochemical, and heavy industrial applications.
Product Parameters
| Parameter | Specification |
|---|---|
| الطراز | 330193-00-08-10-00 |
| Probe Type | 3300 XL 8 mm Proximity Probe |
| Measurement Range | 2 mm (80 mil) linear range |
| Sensitivity | 7.87 mV/µm (200 mV/mil) |
| Tip Diameter | 8 mm |
| Thread Type | M10 × 1 mm |
| Operating Temperature (Probe) | –35 °C to +200 °C |
| Operating Temperature (Cable/Conn.) | –51 °C to +177 °C |
| Frequency Response | 0 to 10 kHz |
| Vibration Tolerance | Up to 20 g, 10–2000 Hz |
| Shock Tolerance | Up to 200 g peak |
| Environmental Protection | IP67 |
| Total Length | 1 meter |
| الوزن | 0.323 kg |
Product Applications
-
Turbines: Continuous rotor vibration and displacement monitoring for gas and steam turbines.
-
Compressors & Pumps: Detects rotor imbalance, misalignment, and bearing wear for early maintenance interventions.
-
Motors & Generators: Provides real-time data for predictive maintenance and operational reliability.
-
Industrial Process Equipment: Ensures accurate monitoring in petrochemical, power generation, and heavy industrial machinery.
Product Advantages
-
High Precision: Provides accurate, linear output across the full 2 mm measurement range.
-
Wide Operating Temperature: Functions reliably from –35 °C to +200 °C.
-
Robust Construction: IP67-rated housing protects against dust, moisture, and contaminants.
-
Shielded Design: Reduces electromagnetic interference for consistent signal quality.
-
Shock & Vibration Resistance: Withstands high vibration and mechanical shock up to 200 g peak.
-
System Compatibility: Fully integrates with Bently Nevada 3300 XL Proximitor® sensors and monitoring systems.
FAQ
-
What is the nominal sensitivity من the 330193-00-08-10-00 probe?
The probe has a nominal sensitivity من 7.87 mV/µm (200 mV/mil), providing precise measurement من shaft vibration and displacement. -
Which monitoring systems support this probe?
It is compatible with Bently Nevada 3300 XL Proximitor® sensors and 3500 series monitoring modules. -
What is the operating temperature range for the probe and cable?
The probe operates from –35 °C to +200 °C, while the cable and connector are rated from –51 °C to +177 °C. -
How is the probe securely mounted on machinery?
The probe uses an M10 × 1 mm threaded body and locknut to ensure stable placement near the rotating shaft. -
What sensing principle does the probe use?
It uses eddy-current technology, generating a voltage proportional to the distance between the probe tip and the shaft surface. -
What level من continuous vibration can the probe tolerate?
The probe tolerates up to 20 g continuous vibration within a 10–2000 Hz frequency range. -
Does the probe comply with industrial protection standards?
Yes, it is IP67-rated, providing protection against dust ingress and temporary water immersion. -
What is the mechanical shock tolerance من this probe?
The probe can withstand mechanical shocks up to 200 g peak without affecting performance. -
How does the probe maintain signal stability in electrically noisy environments?
Shielded construction and high-quality materials minimize electromagnetic interference and temperature drift for reliable output. -
Can the probe measure both radial and axial motion?
Yes, it can accurately measure radial vibration and axial displacement for complete machinery diagnostics.
Related الطرازs (Same Series or Similar)
| الطراز Number | الوصف |
|---|---|
| 330192-00-30-10-00 | 3300 XL 8 mm ETR Probe for standard vibration monitoring |
| 330192-00-70-05-CN | 3300 XL 8 mm ETR Probe with enhanced temperature tolerance |
| 330192-10-80-90-05 | 3300 XL 8 mm ETR Probe for extended industrial use |
| 330192-10-95-90-05 | 3300 XL 8 mm ETR Probe for heavy-duty equipment |
| 330193-00-02-10-00 | 3300 XL 8 mm Probe with alternate length configuration |
| 330192-00-50-05-00 | 3300 XL 8 mm ETR Probe with customized connector design |
Popular Bently Nevada الطرازs
| الطراز Number | الوصف |
|---|---|
| 3500/22M | Transient Data Interface Module |
| 3300 XL 5 mm | Proximity Probe for compact installation |
| 3500/42M | Proximitor®/Seismic Monitor |
| 330130-040-00 | Standard Proximitor® Sensor |
| 3500/50 | Tachometer Module |
| 330180-90-05 | 3300 XL 11 mm Proximity Probe for large shaft targets |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.