产品介绍
The Bently Nevada 330105-02-12-10-02 belongs to the renowned 3300 XL series / 8 mm reverse mount proximity probes, engineered for precision vibration and displacement measurement in rotating machinery. The reverse mount design provides installation flexibility in areas where traditional forward-mounted probes cannot be used, such as confined or reverse-facing spaces.
With a 1-meter total cable length and rugged stainless-steel housing, this probe ensures accurate, stable, and low-noise measurement signals even in harsh industrial environments. It is specifically optimized for use with Bently Nevada’s 3300 XL monitoring systems, enabling predictive maintenance, machine protection, and performance optimization in critical applications.
Product Parameters
| Parameter | Specification |
|---|---|
| 型号 | 330105-02-12-10-02 |
| Series | 3300 XL |
| Sensor Type | Proximity / Eddy Current |
| Probe Diameter | 8 mm |
| Measuring Range | Up to 1 mm (shaft material dependent) |
| Frequency Response | DC to 20 kHz |
| Linearity | ≤ ±1% / full scale |
| Total Length | 1 meter |
| Operating Temperature Range | -35 °C to +120 °C |
| Storage Temperature Range | -40 °C to +150 °C |
| Housing Material | Stainless steel |
| Mounting Type | Reverse Mount |
| Mounting Thread | Metric / UNF options |
| Output Signal | Voltage proportional to shaft displacement |
| Protection Class | IP65 or higher |
| 重量 | 0.323 kg |
Product Applications
The 330105-02-12-10-02 reverse mount probe is designed for high-reliability monitoring in critical rotating equipment, including:
-
Steam and Gas Turbines – Continuous monitoring / rotor vibration and axial displacement.
-
Compressors – Early detection / imbalance, oil whirl, and shaft misalignment.
-
Pumps – Monitoring shaft vibration in confined or reverse-facing installations.
-
Motors and Generators – Measurement / shaft deflection and displacement under varying load conditions.
-
Bearings and Gearboxes – Detecting instability, lubrication film breakdown, or excessive shaft movement.
-
状态 Monitoring Systems – Seamless integration with Bently Nevada 3300 XL modules for predictive maintenance strategies.
Product Advantages
-
Reverse Mount Flexibility: Designed for restricted or reverse-facing installation environments.
-
High Accuracy: Maintains linearity within ±1% / full-scale displacement.
-
Wide Frequency Response: DC to 20 kHz ensures coverage / static and dynamic shaft behavior.
-
Durable Construction: Stainless steel housing resists mechanical stress and corrosion.
-
Extended Cable Option: 1-meter length allows greater installation freedom.
-
Temperature Resilience: Reliable operation from -35 °C to +120 °C.
-
Low-Noise Signal Output: Ensures clear, interference-free measurements.
-
Seamless Compatibility: Fully optimized for 3300 XL monitoring systems.
FAQ
-
What measurement principle does the 330105-02-12-10-02 use?
It applies the eddy current principle, generating a voltage proportional to the shaft’s displacement from the probe tip. -
What shaft materials can the probe measure effectively?
The probe is designed for conductive metals, particularly steel and other ferromagnetic alloys used in rotating shafts. -
What is the probe’s measurement range?
It can measure shaft displacement up to 1 mm, depending on the material properties / the target shaft. -
How is accuracy maintained across the operating range?
Through factory calibration and integration with the 3300 XL monitoring system, ensuring linearity within ±1% / full scale. -
What is the frequency response capability / this probe?
The probe operates from DC to 20 kHz, covering both static shaft position and dynamic vibration monitoring. -
Can it detect both radial and axial movements?
Yes, by adjusting probe orientation, it can measure radial vibration or axial displacement effectively. -
Is it possible to use this probe in high-vibration environments?
Yes, the rugged design and reverse mount configuration allow stable performance in high-vibration industrial conditions. -
Does the probe require recalibration after installation?
No, it comes pre-calibrated from the factory, though periodic verification within the monitoring system is recommended. -
How does it handle electromagnetic interference (EMI)?
The probe uses shielded cables and optimized electronics to minimize EMI and provide reliable output signals. -
Why choose the reverse mount design over standard probes?
Reverse mount probes are ideal for applications where installation space is limited or where forward mounting is not feasible, without compromising accuracy.
Recommended Related 型号s (Same Series / Family)
| 型号 | 描述 |
|---|---|
| 330105-02-12-05-02 | Reverse mount 8 mm probe, 0.5 m cable length |
| 330105-02-12-05-12-RU | Reverse mount 8 mm probe, compact installation |
| 330105-02-12-05-02-RU | Reverse mount 8 mm probe, shielded cable option |
| 330105-02-12-10-05 | Reverse mount probe, extended cable version |
| 330104-15-25-05-02-05 | Standard 8 mm probe from the 3300 XL family |
| 330106-15-25-05-02-05 | 12 mm probe for larger displacement monitoring |
Popular 型号s from the Same 品牌 (Bently Nevada)
| 型号 | 描述 |
|---|---|
| 330104-15-25-05-02-05-00 | Standard 8 mm XL probe with 5 m cable |
| 330104-15-25-05-02-06-00 | 8 mm XL probe, extended range variant |
| 330108-15-25-05-02-05-00 | 14 mm XL proximity probe for large shafts |
| 3500/05-05-05-02-05-00 | Monitoring module supporting XL series probes |
| 330104-15-25-10-02-05-00 | High-temperature 8 mm probe variant |
| 330106-15-25-05-02-07-00 | 12 mm probe for high-speed rotor applications |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。