製品紹介
The Bently Nevada 330105-02-12-10-02 belongs to the renowned 3300 XL series / 8 mm reverse mount proximity probes, engineered for precision vibration and displacement measurement in rotating machinery. The reverse mount design provides installation flexibility in areas where traditional forward-mounted probes cannot be used, such as confined or reverse-facing spaces.
With a 1-meter total cable length and rugged stainless-steel housing, this probe ensures accurate, stable, and low-noise measurement signals even in harsh industrial environments. It is specifically optimized for use with Bently Nevada’s 3300 XL monitoring systems, enabling predictive maintenance, machine protection, and performance optimization in critical applications.
Product Parameters
| Parameter | Specification |
|---|---|
| モデル | 330105-02-12-10-02 |
| Series | 3300 XL |
| Sensor Type | Proximity / Eddy Current |
| Probe Diameter | 8 mm |
| Measuring Range | Up to 1 mm (shaft material dependent) |
| Frequency Response | DC to 20 kHz |
| Linearity | ≤ ±1% / full scale |
| Total Length | 1 meter |
| Operating Temperature Range | -35 °C to +120 °C |
| Storage Temperature Range | -40 °C to +150 °C |
| Housing Material | Stainless steel |
| Mounting Type | Reverse Mount |
| Mounting Thread | Metric / UNF options |
| Output Signal | Voltage proportional to shaft displacement |
| Protection Class | IP65 or higher |
| 重量 | 0.323 kg |
Product Applications
The 330105-02-12-10-02 reverse mount probe is designed for high-reliability monitoring in critical rotating equipment, including:
-
Steam and Gas Turbines – Continuous monitoring / rotor vibration and axial displacement.
-
Compressors – Early detection / imbalance, oil whirl, and shaft misalignment.
-
Pumps – Monitoring shaft vibration in confined or reverse-facing installations.
-
Motors and Generators – Measurement / shaft deflection and displacement under varying load conditions.
-
Bearings and Gearboxes – Detecting instability, lubrication film breakdown, or excessive shaft movement.
-
状態 Monitoring Systems – Seamless integration with Bently Nevada 3300 XL modules for predictive maintenance strategies.
Product Advantages
-
Reverse Mount Flexibility: Designed for restricted or reverse-facing installation environments.
-
High Accuracy: Maintains linearity within ±1% / full-scale displacement.
-
Wide Frequency Response: DC to 20 kHz ensures coverage / static and dynamic shaft behavior.
-
Durable Construction: Stainless steel housing resists mechanical stress and corrosion.
-
Extended Cable Option: 1-meter length allows greater installation freedom.
-
Temperature Resilience: Reliable operation from -35 °C to +120 °C.
-
Low-Noise Signal Output: Ensures clear, interference-free measurements.
-
Seamless Compatibility: Fully optimized for 3300 XL monitoring systems.
FAQ
-
What measurement principle does the 330105-02-12-10-02 use?
It applies the eddy current principle, generating a voltage proportional to the shaft’s displacement from the probe tip. -
What shaft materials can the probe measure effectively?
The probe is designed for conductive metals, particularly steel and other ferromagnetic alloys used in rotating shafts. -
What is the probe’s measurement range?
It can measure shaft displacement up to 1 mm, depending on the material properties / the target shaft. -
How is accuracy maintained across the operating range?
Through factory calibration and integration with the 3300 XL monitoring system, ensuring linearity within ±1% / full scale. -
What is the frequency response capability / this probe?
The probe operates from DC to 20 kHz, covering both static shaft position and dynamic vibration monitoring. -
Can it detect both radial and axial movements?
Yes, by adjusting probe orientation, it can measure radial vibration or axial displacement effectively. -
Is it possible to use this probe in high-vibration environments?
Yes, the rugged design and reverse mount configuration allow stable performance in high-vibration industrial conditions. -
Does the probe require recalibration after installation?
No, it comes pre-calibrated from the factory, though periodic verification within the monitoring system is recommended. -
How does it handle electromagnetic interference (EMI)?
The probe uses shielded cables and optimized electronics to minimize EMI and provide reliable output signals. -
Why choose the reverse mount design over standard probes?
Reverse mount probes are ideal for applications where installation space is limited or where forward mounting is not feasible, without compromising accuracy.
Recommended Related モデルs (Same Series / Family)
| モデル | 説明 |
|---|---|
| 330105-02-12-05-02 | Reverse mount 8 mm probe, 0.5 m cable length |
| 330105-02-12-05-12-RU | Reverse mount 8 mm probe, compact installation |
| 330105-02-12-05-02-RU | Reverse mount 8 mm probe, shielded cable option |
| 330105-02-12-10-05 | Reverse mount probe, extended cable version |
| 330104-15-25-05-02-05 | Standard 8 mm probe from the 3300 XL family |
| 330106-15-25-05-02-05 | 12 mm probe for larger displacement monitoring |
Popular モデルs from the Same ブランド (Bently Nevada)
| モデル | 説明 |
|---|---|
| 330104-15-25-05-02-05-00 | Standard 8 mm XL probe with 5 m cable |
| 330104-15-25-05-02-06-00 | 8 mm XL probe, extended range variant |
| 330108-15-25-05-02-05-00 | 14 mm XL proximity probe for large shafts |
| 3500/05-05-05-02-05-00 | Monitoring module supporting XL series probes |
| 330104-15-25-10-02-05-00 | High-temperature 8 mm probe variant |
| 330106-15-25-05-02-07-00 | 12 mm probe for high-speed rotor applications |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。