产品介绍
The Bently Nevada 330104-08-15-10-02-05 is part / the 3300 XL 8 mm Proximity Transducer System, a highly reliable, rugged, and industry-standard solution for non-contact vibration and position measurements. This system has been designed for critical rotating machinery, delivering precise displacement measurements by sensing the position / a target relative to the probe tip.
This particular model, with its 8 mm tip, is suitable for a wide range / industrial applications, especially in environments where equipment uptime, predictive maintenance, and accurate diagnostics are essential. Engineered for harsh industrial settings, the 330104 series ensures robust performance under extreme temperatures, high vibration, and contamination.
The 3300 XL series is backward compatible with previous Bently Nevada systems and is used extensively in turbomachinery monitoring, making it one / the most trusted sensors globally in the fields / oil and gas, power generation, and heavy industry.
产品规格
| Parameter | Specification |
|---|---|
| 型号 Number | 330104-08-15-10-02-05 |
| Series | 3300 XL |
| Probe Tip Diameter | 8 mm (0.315 in) |
| Thread Size | 3/8-24 UNF |
| Case Material | AISI 303 Stainless Steel |
| Total Length | 1 meters |
| Connector Type | Miniature coaxial |
| Target Material | Typically 4140 steel or equivalent conductive target |
| System Length Code | 10 feet (between probe, extension cable, and proximity sensor) |
| Environmental Protection | Hermetically sealed, resistant to oil, water, and dirt |
| Operating Temperature | –35°C to +177°C (–31°F to +350°F) |
| Sensitivity | 7.87 mV/μm (200 mV/mil) nominal |
| Nonlinearity | ≤ ±0.25% / full-scale over calibrated range |
| Interchangeability | Fully interchangeable within 3300 XL series |
| Compliance | CE, RoHS compliant |
| 重量 | 0.323 kg |
Applications
The 330104-08-15-10-02-05 probe is engineered for high-performance applications, particularly in environments where accurate vibration, position, or shaft displacement monitoring is vital. Common use cases include:
-
Steam turbines
-
Gas turbines
-
Compressors
-
Centrifugal pumps
-
Gearboxes
-
Motors and generators
-
Rotating machinery in petrochemical plants
-
Pulp and paper industry equipment
Product Advantages
High Reliability: Designed to withstand extreme industrial environments and /fer long-term operational reliability.
Backward Compatibility: Compatible with older systems from Bently Nevada, allowing seamless upgrades.
Enhanced Environmental Protection: Sealed against contaminants such as oil and dust, ideal for industrial environments.
Precision Accuracy: Offers exceptional linearity and sensitivity, ensuring precise measurements.
Industry Standard: Widely accepted in vibration monitoring systems and predictive maintenance setups globally.
Flexible Configuration: Multiple lengths and cable configurations available to suit specific machine setups.
CE & RoHS Certified: Complies with modern regulatory standards for safety and environmental impact.
Wide Temperature Range: Operates reliably in environments ranging from freezing to high-heat industrial zones.
Latest News Titles on Related Technology and 产品
-
“GE Bently Nevada Enhances Asset 状态 Monitoring Capabilities in Oil & Gas Industry”
-
“New Developments in Proximity Probe Calibration for Turbomachinery Health”
-
“Bently Nevada Launches 下一页-Gen Monitoring Systems with Expanded Compatibility”
-
“Upgrading Legacy Systems with 3300 XL Series Probes – Case Study in Power Generation”
-
“Vibration Monitoring Proves Critical in Avoiding Downtime in Petrochemical Plants”
-
“Best Practices in Shaft Vibration Monitoring Using Bently Nevada Probes”
-
“Global Surge in Demand for 状态 Monitoring Solutions in 2025”
-
“Enhanced Diagnostics for Rotating Equipment: Role / Proximity Probes”
FAQ – 常见问题
-
What is the sensing range / the 330104-08-15-10-02-05 probe?
This model is calibrated for a standard 8 mm tip and provides a linear sensing range / approximately 2 mm (80 mils). -
Can I use this probe with a non-Bently system?
While technically possible, optimal performance and compatibility are achieved when used with Bently Nevada monitoring systems. -
Is it suitable for high-temperature applications?
Yes, it operates reliably in temperatures up to +177°C (350°F). -
What is the difference between 330104 and 330101 series?
The 330104 /fers different cable lengths and mounting thread options but follows the same 8 mm sensing principle. -
Can it detect axial as well as radial displacement?
Yes, it can monitor both axial and radial shaft movement depending on mounting orientation. -
Is field calibration required?
Field calibration is recommended during installation for optimal accuracy, especially if used with custom targets. -
How long is the product lifecycle?
With proper installation, the probe can last several years, even under harsh conditions. -
Can I extend the cable beyond 10 feet?
Extension cables are available, but the total system length should not exceed the calibrated distance. -
Is the probe interchangeable with other XL probes?
Yes, the probe is part / the 3300 XL series and is fully interchangeable within this family. -
Does the product have explosion-pro/ certification?
Some versions / the 3300 XL series are available with hazardous area approvals (check specific model certifications).
Related 型号s (Same Series or Functionality)
| 型号 Number | 描述 | Cable Length | Thread Size | Application Notes |
|---|---|---|---|---|
| 330104-00-05-10-02-00 | 8 mm probe, short cable, standard thread | 5 ft | 3/8-24 UNF | General machinery vibration monitoring |
| 330104-00-10-10-02-00 | 8 mm probe, 10 ft cable | 10 ft | 3/8-24 UNF | Extended systems in pumps and motors |
| 330104-00-15-10-02-00 | 8 mm probe, 15 ft cable | 15 ft | 3/8-24 UNF | Long-distance installations |
| 330104-05-15-10-02-05 | 8 mm probe, armored cable, rugged industrial | 15 ft | 1/2-20 UNF | Harsh environment setup |
| 330101-00-08-10-02-00 | Legacy series, compatible with XL systems | 8 ft | 3/8-24 UNF | Legacy system retr/itting |
| 330105-02-12-10-02-00 | Extension cable model, XL system | 12 ft | 3/8-24 UNF | Used with 3300 XL probes |
| 330130-040-00-00 | Proximity sensor (not probe), part / complete system | 8 ft | 1/2-20 UNF | Completes proximity system with probe |
| 330180-91-00 | Mounting bracket for 3300 XL 8 mm Probes | 8 ft | 1/2-20 UNF | For precision installation and alignment |
Popular 型号s from Bently Nevada (Across Product Lines)
| 型号 Number | 描述 | Application | Type |
|---|---|---|---|
| 3500/22M | Transient Data Interface Module | Machine condition monitoring | Monitoring Module |
| 3500/42M | Proximitor Seismic Monitor Module | Vibration analysis | Monitoring Module |
| 3500/25 | Keyphasor Module | Shaft position/speed | Monitoring Module |
| 3500/33 | TMR Relay Module | Redundant safety relay | Trip Module |
| 330130-040-00-00 | Proximitor Sensor | Position sensing | Sensor |
| 990-04-70-01-00 | Velomitor Piezo-Velocity Sensor | Vibration detection | Velocity Sensor |
| 144181-01 | Portable Vibration Analyzer | Field diagnostics | Portable Instrument |
| 3701/44T | TSI Diagnostic Platform | Advanced diagnostics & analytics | S/tware + Hardware |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。