Produkteinführung
The Bently Nevada 330104-08-15-10-02-05 is part von the 3300 XL 8 mm Proximity Transducer System, a highly reliable, rugged, and industry-standard solution for non-contact vibration and position measurements. This system has been designed for critical rotating machinery, delivering precise displacement measurements by sensing the position von a target relative to the probe tip.
This particular model, with its 8 mm tip, is suitable for a wide range von industrial applications, especially in environments where equipment uptime, predictive maintenance, and accurate diagnostics are essential. Engineered for harsh industrial settings, the 330104 series ensures robust performance under extreme temperatures, high vibration, and contamination.
The 3300 XL series is backward compatible with previous Bently Nevada systems and is used extensively in turbomachinery monitoring, making it one von the most trusted sensors globally in the fields von oil and gas, power generation, and heavy industry.
Produktspezifikationen
| Parameter | Specification |
|---|---|
| Modell Number | 330104-08-15-10-02-05 |
| Series | 3300 XL |
| Probe Tip Diameter | 8 mm (0.315 in) |
| Thread Size | 3/8-24 UNF |
| Case Material | AISI 303 Stainless Steel |
| Total Length | 1 meters |
| Connector Type | Miniature coaxial |
| Target Material | Typically 4140 steel or equivalent conductive target |
| System Length Code | 10 feet (between probe, extension cable, and proximity sensor) |
| Environmental Protection | Hermetically sealed, resistant to oil, water, and dirt |
| Operating Temperature | –35°C to +177°C (–31°F to +350°F) |
| Sensitivity | 7.87 mV/μm (200 mV/mil) nominal |
| Nonlinearity | ≤ ±0.25% von full-scale over calibrated range |
| Interchangeability | Fully interchangeable within 3300 XL series |
| Compliance | CE, RoHS compliant |
| Gewicht | 0.323 kg |
Applications
The 330104-08-15-10-02-05 probe is engineered for high-performance applications, particularly in environments where accurate vibration, position, or shaft displacement monitoring is vital. Common use cases include:
-
Steam turbines
-
Gas turbines
-
Compressors
-
Centrifugal pumps
-
Gearboxes
-
Motors and generators
-
Rotating machinery in petrochemical plants
-
Pulp and paper industry equipment
Product Advantages
High Reliability: Designed to withstand extreme industrial environments and vonfer long-term operational reliability.
Backward Compatibility: Compatible with older systems from Bently Nevada, allowing seamless upgrades.
Enhanced Environmental Protection: Sealed against contaminants such as oil and dust, ideal for industrial environments.
Precision Accuracy: Offers exceptional linearity and sensitivity, ensuring precise measurements.
Industry Standard: Widely accepted in vibration monitoring systems and predictive maintenance setups globally.
Flexible Configuration: Multiple lengths and cable configurations available to suit specific machine setups.
CE & RoHS Certified: Complies with modern regulatory standards for safety and environmental impact.
Wide Temperature Range: Operates reliably in environments ranging from freezing to high-heat industrial zones.
Latest News Titles on Related Technology and Produkte
-
“GE Bently Nevada Enhances Asset Zustand Monitoring Capabilities in Oil & Gas Industry”
-
“New Developments in Proximity Probe Calibration for Turbomachinery Health”
-
“Bently Nevada Launches Nächste-Gen Monitoring Systems with Expanded Compatibility”
-
“Upgrading Legacy Systems with 3300 XL Series Probes – Case Study in Power Generation”
-
“Vibration Monitoring Proves Critical in Avoiding Downtime in Petrochemical Plants”
-
“Best Practices in Shaft Vibration Monitoring Using Bently Nevada Probes”
-
“Global Surge in Demand for Zustand Monitoring Solutions in 2025”
-
“Enhanced Diagnostics for Rotating Equipment: Role von Proximity Probes”
FAQ – Häufig gestellte Fragen
-
What is the sensing range von the 330104-08-15-10-02-05 probe?
This model is calibrated for a standard 8 mm tip and provides a linear sensing range von approximately 2 mm (80 mils). -
Can I use this probe with a non-Bently system?
While technically possible, optimal performance and compatibility are achieved when used with Bently Nevada monitoring systems. -
Is it suitable for high-temperature applications?
Yes, it operates reliably in temperatures up to +177°C (350°F). -
What is the difference between 330104 and 330101 series?
The 330104 vonfers different cable lengths and mounting thread options but follows the same 8 mm sensing principle. -
Can it detect axial as well as radial displacement?
Yes, it can monitor both axial and radial shaft movement depending on mounting orientation. -
Is field calibration required?
Field calibration is recommended during installation for optimal accuracy, especially if used with custom targets. -
How long is the product lifecycle?
With proper installation, the probe can last several years, even under harsh conditions. -
Can I extend the cable beyond 10 feet?
Extension cables are available, but the total system length should not exceed the calibrated distance. -
Is the probe interchangeable with other XL probes?
Yes, the probe is part von the 3300 XL series and is fully interchangeable within this family. -
Does the product have explosion-provon certification?
Some versions von the 3300 XL series are available with hazardous area approvals (check specific model certifications).
Related Modells (Same Series or Functionality)
| Modell Number | Beschreibung | Cable Length | Thread Size | Application Notes |
|---|---|---|---|---|
| 330104-00-05-10-02-00 | 8 mm probe, short cable, standard thread | 5 ft | 3/8-24 UNF | General machinery vibration monitoring |
| 330104-00-10-10-02-00 | 8 mm probe, 10 ft cable | 10 ft | 3/8-24 UNF | Extended systems in pumps and motors |
| 330104-00-15-10-02-00 | 8 mm probe, 15 ft cable | 15 ft | 3/8-24 UNF | Long-distance installations |
| 330104-05-15-10-02-05 | 8 mm probe, armored cable, rugged industrial | 15 ft | 1/2-20 UNF | Harsh environment setup |
| 330101-00-08-10-02-00 | Legacy series, compatible with XL systems | 8 ft | 3/8-24 UNF | Legacy system retrvonitting |
| 330105-02-12-10-02-00 | Extension cable model, XL system | 12 ft | 3/8-24 UNF | Used with 3300 XL probes |
| 330130-040-00-00 | Proximity sensor (not probe), part von complete system | 8 ft | 1/2-20 UNF | Completes proximity system with probe |
| 330180-91-00 | Mounting bracket for 3300 XL 8 mm Probes | 8 ft | 1/2-20 UNF | For precision installation and alignment |
Popular Modells from Bently Nevada (Across Product Lines)
| Modell Number | Beschreibung | Application | Type |
|---|---|---|---|
| 3500/22M | Transient Data Interface Module | Machine condition monitoring | Monitoring Module |
| 3500/42M | Proximitor Seismic Monitor Module | Vibration analysis | Monitoring Module |
| 3500/25 | Keyphasor Module | Shaft position/speed | Monitoring Module |
| 3500/33 | TMR Relay Module | Redundant safety relay | Trip Module |
| 330130-040-00-00 | Proximitor Sensor | Position sensing | Sensor |
| 990-04-70-01-00 | Velomitor Piezo-Velocity Sensor | Vibration detection | Velocity Sensor |
| 144181-01 | Portable Vibration Analyzer | Field diagnostics | Portable Instrument |
| 3701/44T | TSI Diagnostic Platform | Advanced diagnostics & analytics | Svontware + Hardware |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.