Product Overview
The Bently Nevada 330104-00-24-10-02-00 3300 XL 8 mm Proximity Probe is a precision-engineered non-contact eddy current displacement sensor, designed for use in high-value rotating equipment monitoring applications. It belongs to the industry-proven 3300 XL series, which is known worldwide for its superior reliability, accuracy, and rugged construction.
This model features a 1 meter non-armored cable length, an 8 mm probe tip, and is fully compatible with 3300 XL Proximitor Sensors and extension cables. Designed to deliver accurate shaft position, vibration, and axial thrust measurements, this probe forms the foundation / many advanced machinery protection systems used in oil & gas, power generation, refining, and heavy industries.
The 330104-00-24-10-02-00 probe outputs a linear voltage corresponding to the target shaft’s displacement from the probe tip — enabling real-time monitoring / machinery condition and performance.
产品规格
| Parameter | Specification |
|---|---|
| 型号 | 330104-00-24-10-02-00 |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Sensing Technology | Eddy current, non-contact |
| Probe Tip Diameter | 8 mm |
| Probe Tip Material | PPS (Polyphenylene sulfide) |
| Thread Size | 3/8-24 UNF |
| Total Length | 1 meter |
| Cable Armor | Non-armored |
| Connector Type | Miniature coaxial connector |
| Target Material | 4140 steel (factory calibrated) |
| Measurement Range | 2 mm (80 mils), linear range |
| Scale Factor | 200 mV/mil (7.87 mV/μm) nominal |
| System Linear Range | 80 mils (2.0 mm) |
| Non-Linearity | ≤ ±0.75% / full scale (typical) |
| Frequency Response | 0 Hz to 10 kHz (±3 dB) |
| Operating Temperature (Probe) | -51 °C to +177 °C |
| Operating Temperature (System) | -35 °C to +120 °C |
| Humidity | 100% condensing, fully sealed |
| Shock / Vibration Tolerance | 10 g @ 10-2,000 Hz |
| Pressure Rating | 5 bar (sealed probe tip) |
| Certifications | CE, ATEX Zone 2, CSA, IECEx |
| 重量 | 0.323 kg |
Applications
The 330104-00-24-10-02-00 proximity probe is used in a wide array / rotating machinery applications where precision shaft monitoring is critical:
-
Gas Turbines
Monitoring vibration and axial position to ensure safe operation and prevent catastrophic failure. -
Steam Turbines
Measuring rotor dynamics and providing early warning / bearing wear or thrust conditions. -
Compressors (Centrifugal, Reciprocating)
Tracking shaft position to detect imbalance, misalignment, or excessive vibration. -
Electric Motors
Monitoring bearing health and dynamic stability. -
Industrial Pumps
Detecting pump imbalance or mechanical degradation. -
Fans, Blowers, and Gearboxes
Ensuring stable operation and minimizing unplanned outages. -
Oil & Gas, Power Generation, Refining, Petrochemical Plants
Critical component in machinery protection systems across demanding industries.
Product Advantages
-
Unmatched Reliability
The 3300 XL platform is known worldwide for its long-term stability and dependable operation. -
High-Temperature Performance
Operates in environments up to +177 °C at the probe tip. -
Non-Armored Cable
Provides flexibility for installation where armored protection is not required. -
Fully Certified for Harsh Environments
CE, ATEX Zone 2, CSA, and IECEx certifications for hazardous areas. -
Linear, Accurate Output
Delivers precise, repeatable measurements across the entire linear range. -
Minimal Drift
Long service life with excellent performance stability. -
Broad Industry Compatibility
Seamlessly integrates with Bently Nevada’s 3300 XL Proximitor Sensors and legacy systems. -
Rugged, Sealed Design
100% humidity tolerance — suitable for extreme industrial settings. -
Low Maintenance Requirements
No recalibration required during service life. -
Optimized for Critical Rotating Equipment
Designed specifically for turbines, compressors, motors, pumps, and gear-driven machinery.
常见问题 (FAQ)
-
What is the primary function / this proximity probe?
To measure shaft vibration, position, and axial thrust in rotating equipment. -
How does this model differ from other 3300 XL probes?
This version features a 1 meter non-armored cable for flexible installation. -
What is the operating temperature range?
From -51 °C to +177 °C at the probe tip. -
Is the probe suitable for hazardous environments?
Yes — certified for CE, ATEX Zone 2, CSA, IECEx. -
How /ten does the probe require recalibration?
It is factory-calibrated and designed for long-term stability without recalibration. -
What materials are recommended for the shaft target?
4140 steel or material calibrated to match factory settings. -
Is it compatible with legacy Bently Nevada monitoring systems?
Yes — fully compatible with existing 3300 series and 3500 series Proximitor modules. -
What is the system’s linear measurement range?
80 mils (2.0 mm). -
Can it operate in high vibration environments?
Yes — qualified for 10 g @ 10-2000 Hz. -
What type / machinery benefits most from this probe?
Turbines, compressors, motors, pumps, blowers, and gearboxes in critical service.
Related 型号s from the Same Series or 分类
| 型号 | Product Type | Cable Length | Armor Type | Dimensions & 重量 |
|---|---|---|---|---|
| 330104-00-24-10-02-00 | 3300 XL 8 mm Probe | 24 ft (7.32 m) | Non-armored | 8 mm tip, ~0.60 kg |
| 330104-00-22-10-02-05 | 3300 XL 8 mm Probe | 22 ft (6.71 m) | Non-armored | 8 mm tip, ~0.58 kg |
| 330104-00-20-10-02-00 | 3300 XL 8 mm Probe | 20 ft (6.10 m) | Non-armored | 8 mm tip, ~0.57 kg |
| 330104-00-25-05-02-00 | 3300 XL 8 mm Probe | 25 ft (7.62 m) | Armored | 8 mm tip, ~0.65 kg |
| 330104-00-15-10-01-CN | 3300 XL 8 mm Probe | 15 ft (4.57 m) | Non-armored | 8 mm tip, ~0.50 kg |
| 330104-00-10-10-01-CN | 3300 XL 8 mm Probe | 10 ft (3.05 m) | Non-armored | 8 mm tip, ~0.45 kg |
Popular 型号s from Bently Nevada Product Line
| 型号 | Product Type | Application Area | Dimensions & 重量 |
|---|---|---|---|
| 3500/22M | Transient Data Interface Module | Machine Protection Systems | ~0.80 kg |
| 3500/42M | Proximitor/Seismic Monitor | Shaft vibration, bearing wear | ~1.20 kg |
| 3500/33 | RTD/TC Temperature Monitor | Motor winding / bearing temp | ~1.10 kg |
| 330130-040-00-00 | 3300 XL 8 mm Extension Cable | Drives matching probes | ~0.30 kg |
| 330180-50-00 | 3300 XL Proximitor Sensor | Drives 3300 XL 8 mm probes | ~0.50 kg |
| 3500/15 | Power Supply Module | 3500 Series Rack | ~1.50 kg |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。