产品介绍
The Bently Nevada 330104-00-07-90-12-05 3300 XL 8 mm Proximity Probe is a high-precision sensor designed for vibration and position monitoring in rotating machinery. It is part / the 3300 XL series, which is widely recognized for reliable performance in industrial environments, including turbines, compressors, and generators. This probe converts the displacement / a target into a voltage signal, enabling accurate measurement / shaft movement and vibration analysis for predictive maintenance.
Product Advantages
-
High Accuracy and Stability: Provides precise measurements for critical machinery monitoring.
-
Robust Design: Resists harsh industrial environments, including high temperatures, vibration, and contamination.
-
Wide Compatibility: Works seamlessly with Bently Nevada 3300 XL systems and related monitoring devices.
-
Ease / Installation: Designed for quick and secure installation without compromising performance.
-
Enhanced Signal Quality: Low-noise output for reliable vibration and displacement data.
-
Predictive Maintenance 支持: Facilitates early detection / mechanical issues to prevent unexpected downtime.
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Type | 8 mm Proximity Probe |
| Series | 3300 XL |
| 型号 Number | 330104-00-07-90-12-05 |
| Target Gap Range | 8 mm (typical) |
| Output Type | Differential AC Voltage |
| Operating Temperature | -40°C to +125°C |
| Cable Length | 10 ft (standard) |
| Housing Material | Stainless Steel |
| 重量 | 2.907 kg |
| Total Length | 9 m |
| Connector Type | 2-pin LEMO or equivalent |
| Sensitivity | 50 mV/mil (typical) |
| Linearity | ±1% full scale |
| Mounting Type | Threaded or clamp |
Product Applications
-
Turbines: Steam, gas, and hydro turbines for shaft vibration monitoring.
-
Compressors: Centrifugal and axial compressors for displacement measurement.
-
Generators: Rotor position monitoring and vibration analysis.
-
Motors: High-speed electric motors for predictive maintenance.
-
Industrial Rotating Machinery: Pumps, fans, and gearboxes in critical industrial operations.
-
状态 Monitoring Systems: Integration into Bently Nevada 3300 XL monitoring systems.
FAQ
-
Q: What is the maximum operating temperature for this probe?
A: The probe can operate safely between -40°C and +125°C. -
Q: What type / output signal does this probe provide?
A: It provides a differential AC voltage output proportional to shaft displacement. -
Q: How is the probe installed on rotating machinery?
A: It can be installed using a threaded mount or clamped in proximity to the rotating shaft. -
Q: What is the typical target gap for this probe?
A: The standard target gap is 8 mm. -
Q: Can this probe be used with non-Bently Nevada monitoring systems?
A: While optimized for 3300 XL systems, it can be used with other compatible displacement monitoring systems with matching signal requirements. -
Q: How is the probe’s sensitivity defined?
A: Typical sensitivity is 50 mV/mil, allowing precise measurement / shaft displacement. -
Q: What kind / maintenance does the probe require?
A: Regular inspection for cable integrity and connection quality; no calibration is typically needed during normal operation. -
Q: Does the probe support high-speed machinery monitoring?
A: Yes, it is designed for high-speed rotating equipment with minimal signal noise. -
Q: How is the probe protected from environmental contamination?
A: The stainless steel housing and sealed electronics resist dust, moisture, and vibration. -
Q: What is the linearity / the probe signal?
A: The probe maintains ±1% full-scale linearity across its operating range.
Recommended 6 Same-Series or Related 型号s
| 型号 Number | Target Gap | Notes |
|---|---|---|
| 330104-00-07-50-12-00 | 8 mm | Standard 3300 XL probe |
| 330104-00-07-10-12-RU | 8 mm | Right-angle mounting version |
| 330104-00-07-90-12-00 | 8 mm | Basic model with standard cable length |
| 330104-00-07-50-02-05 | 8 mm | Shielded cable version |
| 330104-00-07-50-12-05 | 8 mm | Enhanced durability for industrial use |
| 330104-00-07-90-12-RU | 8 mm | Ruggedized right-angle mounting version |
Recommended 6 Popular 型号s from the Same 品牌
| 型号 Number | Target Gap | Application |
|---|---|---|
| 330104-00-07-50-12-00 | 8 mm | Standard rotating machinery monitoring |
| 330104-00-07-10-12-RU | 8 mm | Right-angle probe |
| 330104-00-07-90-12-00 | 8 mm | General purpose 3300 XL probe |
| 330105-00-07-12-12-05 | 12 mm | High-displacement probe |
| 330106-00-07-50-12-00 | 8 mm | High-temperature industrial probe |
| 330107-00-07-50-12-05 | 8 mm | Enhanced shielding for EMI environments |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。