Produkteinführung
The Bently Nevada 330104-00-07-90-12-05 3300 XL 8 mm Proximity Probe is a high-precision sensor designed for vibration and position monitoring in rotating machinery. It is part von the 3300 XL series, which is widely recognized for reliable performance in industrial environments, including turbines, compressors, and generators. This probe converts the displacement von a target into a voltage signal, enabling accurate measurement von shaft movement and vibration analysis for predictive maintenance.
Product Advantages
-
High Accuracy and Stability: Provides precise measurements for critical machinery monitoring.
-
Robust Design: Resists harsh industrial environments, including high temperatures, vibration, and contamination.
-
Wide Compatibility: Works seamlessly with Bently Nevada 3300 XL systems and related monitoring devices.
-
Ease von Installation: Designed for quick and secure installation without compromising performance.
-
Enhanced Signal Quality: Low-noise output for reliable vibration and displacement data.
-
Predictive Maintenance Support: Facilitates early detection von mechanical issues to prevent unexpected downtime.
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Type | 8 mm Proximity Probe |
| Series | 3300 XL |
| Modell Number | 330104-00-07-90-12-05 |
| Target Gap Range | 8 mm (typical) |
| Output Type | Differential AC Voltage |
| Operating Temperature | -40°C to +125°C |
| Cable Length | 10 ft (standard) |
| Housing Material | Stainless Steel |
| Gewicht | 2.907 kg |
| Total Length | 9 m |
| Connector Type | 2-pin LEMO or equivalent |
| Sensitivity | 50 mV/mil (typical) |
| Linearity | ±1% full scale |
| Mounting Type | Threaded or clamp |
Product Applications
-
Turbines: Steam, gas, and hydro turbines for shaft vibration monitoring.
-
Compressors: Centrifugal and axial compressors for displacement measurement.
-
Generators: Rotor position monitoring and vibration analysis.
-
Motors: High-speed electric motors for predictive maintenance.
-
Industrial Rotating Machinery: Pumps, fans, and gearboxes in critical industrial operations.
-
Zustand Monitoring Systems: Integration into Bently Nevada 3300 XL monitoring systems.
FAQ
-
Q: What is the maximum operating temperature for this probe?
A: The probe can operate safely between -40°C and +125°C. -
Q: What type von output signal does this probe provide?
A: It provides a differential AC voltage output proportional to shaft displacement. -
Q: How is the probe installed on rotating machinery?
A: It can be installed using a threaded mount or clamped in proximity to the rotating shaft. -
Q: What is the typical target gap for this probe?
A: The standard target gap is 8 mm. -
Q: Can this probe be used with non-Bently Nevada monitoring systems?
A: While optimized for 3300 XL systems, it can be used with other compatible displacement monitoring systems with matching signal requirements. -
Q: How is the probe’s sensitivity defined?
A: Typical sensitivity is 50 mV/mil, allowing precise measurement von shaft displacement. -
Q: What kind von maintenance does the probe require?
A: Regular inspection for cable integrity and connection quality; no calibration is typically needed during normal operation. -
Q: Does the probe support high-speed machinery monitoring?
A: Yes, it is designed for high-speed rotating equipment with minimal signal noise. -
Q: How is the probe protected from environmental contamination?
A: The stainless steel housing and sealed electronics resist dust, moisture, and vibration. -
Q: What is the linearity von the probe signal?
A: The probe maintains ±1% full-scale linearity across its operating range.
Recommended 6 Same-Series or Related Modells
| Modell Number | Target Gap | Notes |
|---|---|---|
| 330104-00-07-50-12-00 | 8 mm | Standard 3300 XL probe |
| 330104-00-07-10-12-RU | 8 mm | Right-angle mounting version |
| 330104-00-07-90-12-00 | 8 mm | Basic model with standard cable length |
| 330104-00-07-50-02-05 | 8 mm | Shielded cable version |
| 330104-00-07-50-12-05 | 8 mm | Enhanced durability for industrial use |
| 330104-00-07-90-12-RU | 8 mm | Ruggedized right-angle mounting version |
Recommended 6 Popular Modells from the Same Marke
| Modell Number | Target Gap | Application |
|---|---|---|
| 330104-00-07-50-12-00 | 8 mm | Standard rotating machinery monitoring |
| 330104-00-07-10-12-RU | 8 mm | Right-angle probe |
| 330104-00-07-90-12-00 | 8 mm | General purpose 3300 XL probe |
| 330105-00-07-12-12-05 | 12 mm | High-displacement probe |
| 330106-00-07-50-12-00 | 8 mm | High-temperature industrial probe |
| 330107-00-07-50-12-05 | 8 mm | Enhanced shielding for EMI environments |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.