产品介绍
The Bently Nevada 330101-00-24-10-02-05 is part / the highly trusted 3300 XL 8mm Proximity Probe System, designed and manufactured by Bently Nevada, a globally recognized brand under Baker Hughes. This proximity transducer system is engineered to provide precise, reliable measurements / shaft displacement, vibration, and position in rotating machinery applications. It is widely used in turbomachinery monitoring and protection systems.
The 330101-00-24-10-02-05 model consists / a proximity probe with a standard 8 mm tip, suited for use with the matching extension cable and Proximitor® sensor. This model is specified for tight-tolerance applications and complies with API 670 standards, /fering high sensitivity and robust environmental durability.
产品规格
| Parameter | Specification |
|---|---|
| Product Name | 3300 XL 8mm Proximity Probe |
| 型号 Number | 330101-00-24-10-02-05 |
| Probe Tip Diameter | 8 mm (standard XL tip) |
| Total Length | 1.0 meter |
| Connector Type | Miniature coaxial (MIL-style) |
| Connector Position | Straight boot |
| Thread Type | 3/8-24 UNF-2A |
| Thread Length | 0.625 inch (15.88 mm) |
| Target Material Compatibility | 4140 steel or equivalent |
| Sensitivity | 7.87 mV/µm (200 mV/mil) |
| Linear Range | 0.25 – 2.0 mm (10 – 80 mils) |
| System Length | Matched to 3300 XL Extension Cable and Proximitor® |
| Operating Temperature Range | -35°C to +177°C (probe and cable) |
| Storage Temperature | -51°C to +177°C |
| Vibration Limit (Probe Only) | 50 g, 10–2000 Hz |
| Shock Limit | 5000 g peak |
| Compliance Standards | API 670, CE, RoHS |
| Mounting Type | Threaded insertion with jam nut |
| Front-End Protection | Polyphenylene sulfide (PPS) tip material |
| Enclosure Material | Stainless steel housing |
| 重量 | 0.323 kg |
Product Applications
The Bently Nevada 330101-00-24-10-02-05 proximity probe is commonly deployed in:
-
Steam and Gas Turbines: For monitoring shaft vibration and axial position.
-
Compressors: Ensuring dynamic balance and protection from excessive shaft displacement.
-
Motors and Generators: Continuous vibration tracking and bearing condition monitoring.
-
Pumps and Fans: 状态-based maintenance strategies using non-contact measurements.
-
Industrial Gearboxes: Monitoring gear mesh vibrations and misalignments.
-
Critical Rotating Machinery in Power Plants, Oil & Gas Refineries, and Petrochemical Plants.
Product Advantages
-
Industry-Leading Reliability: Field-proven in millions / operating hours worldwide, even in extreme environments.
-
High Accuracy and Repeatability: Optimized for tight tolerance proximity measurements as per API 670 requirements.
-
Interchangeability: Fully compatible with 3300 XL extension cables and Proximitor sensors, minimizing system design effort.
-
Wide Operating Temperature: Ensures consistent performance across a broad industrial temperature spectrum.
-
Rugged Construction: Built to withstand harsh environmental conditions including shock, vibration, moisture, and contaminants.
-
Flexible Installation: Multiple thread lengths and cable lengths support application-specific configurations.
-
Global Certification: CE-marked and RoHS-compliant for unrestricted use worldwide.
-
Stable Calibration: Factory-calibrated and thermally compensated for drift-free operation.
常见问题 (FAQ)
-
Is the 330101-00-24-10-02-05 probe compatible with older Bently systems like 7200 series?
→ No, it is designed specifically for use with the 3300 XL series extension cables and Proximitor® sensors only. -
What material should the monitored shaft be made from for optimal accuracy?
→ The standard calibration is based on 4140 steel; deviations require custom calibration. -
Can this probe be installed in high-temperature environments?
→ Yes, it supports up to +177°C operating temperature, making it suitable for hot machinery. -
Is this probe suitable for underwater or submerged conditions?
→ No, it is not rated for continuous submersion, although it resists moisture and oil splashes. -
How do I verify if the probe is working correctly in the field?
→ Field test can be done using a calibrated dial micrometer and Bently Nevada signal tester or monitoring module. -
What is the correct gap voltage at mid-range for this probe?
→ Typically around -10 VDC at 1 mm gap, but exact values may vary based on target material. -
Is it safe to route the probe cable near high-voltage power lines?
→ It’s not recommended. Use proper shielding and routing to avoid EMI interference. -
Can I cut or extend the probe cable in the field?
→ No, the cable length is factory-calibrated. Cutting or altering will void accuracy and warranty. -
Does the probe require regular recalibration?
→ No recalibration is needed under normal conditions, but periodic verification is advised. -
Is the probe safe to use in hazardous areas (explosion-pro/ zones)?
→ It can be used in hazardous areas when installed with suitable barriers and certified enclosures.
Recommended 型号s from the Same Series or Closely Related
| 型号 Number | 描述 | Cable Length | Thread Size |
|---|---|---|---|
| 330101-00-20-10-02-05 | XL 8mm Probe, 20″ cable, straight connector | 20 inches | 3/8-24 UNF |
| 330101-00-32-10-02-05 | XL 8mm Probe, 32″ cable, straight connector | 32 inches | 3/8-24 UNF |
| 330101-00-12-10-02-05 | XL 8mm Probe, 12″ cable, straight connector | 12 inches | 3/8-24 UNF |
| 330105-02-12-10-02-CN | XL 11mm Probe, 12″ cable, heavy-duty version | 12 inches | M10 x 1 |
| 330103-00-08-10-02-00 | XL 5mm Probe, compact design for small spaces | 8 inches | 1/4-28 UNF |
| 330106-05-30-10-02-00 | High-temperature 8mm Probe, armored cable | 30 inches | 1/2-20 UNF |
Popular 型号s from the Same 品牌 (Bently Nevada)
| 型号 Number | 描述 | Application Area | Key Feature |
|---|---|---|---|
| 3300 XL 5mm (330103) | Compact proximity probe for limited space | General industrial machinery | 5mm tip, short length |
| 3300 XL 11mm (330105) | Heavy-duty probe for large clearances | Turbomachinery | 11mm sensing tip |
| 330400/330425 | Velomitor Piezoelectric Velocity Sensor | Vibration monitoring | Velocity-based detection |
| 3500/42M | Proximitor Seismic Monitor Module | Machinery protection systems | Works with proximity + seismic |
| 3500/22M | Transient Data Interface (TDI) Module | Advanced diagnostics | Dynamic data capture |
| ADAPT 3701/55 | 状态 Monitoring Relay | Online condition analysis | Rules-based diagnostics |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。