产品介绍
The Bently Nevada P1407030-02006 Double Probe is a precision proximity sensor designed for critical machinery monitoring in industrial environments. This double probe /fers dual measurement capabilities, providing redundancy and enhanced reliability in vibration and position monitoring for rotating machinery. Built to withstand extreme operational conditions, the sensor is suitable for applications where accurate shaft position or vibration measurement is essential for maintenance and safety.
The design incorporates robust materials and high-precision eddy current sensing technology, ensuring consistent performance under high-speed rotation, variable temperatures, and challenging installation environments. With its dual-probe configuration, this sensor allows either simultaneous measurement / two separate parameters or backup sensing, improving reliability in critical machinery applications such as turbines, compressors, and generators.
Technical Specifications
| Parameter | Specification |
|---|---|
| 型号 Number | P1407030-02006 |
| Type | Double Probe |
| Measurement Principle | Eddy Current / Proximity Sensing |
| Probe Material | Stainless Steel / High-Temperature Alloy |
| Cable Type | Shielded, Twisted Pair |
| Total Length | 1.0 meter |
| Operating Temperature | -40°C to +120°C |
| Frequency Response | DC to 25 kHz |
| Sensitivity | 50 mV/mil typical |
| Gap Range | 0.1 mm to 2.0 mm |
| Linearity | ±1% / full scale |
| Maximum Shaft Speed | 50,000 RPM |
| Output Impedance | 100 Ohms |
| 重量 | 0.22 kg |
| Environmental Protection | IP67 / NEMA 4X |
| Mounting Style | Threaded or Flanged |
Applications
The P1407030-02006 Double Probe is widely used for condition monitoring / critical rotating machinery where high reliability is required. Typical applications include:
-
Steam and gas turbines in power generation facilities
-
Compressors in oil and gas, chemical, and petrochemical plants
-
High-speed electric motors and generators
-
Process pumps and other rotating equipment in industrial plants
-
Offshore oil and gas machinery requiring redundant sensing
-
Applications requiring dual measurement / the same shaft for safety-critical monitoring
This probe is especially beneficial in environments where early detection / vibration anomalies or misalignment is crucial to prevent catastrophic failures.
Advantages
The P1407030-02006 /fers several technical and operational advantages:
-
Redundant Measurement Capability: Dual probes allow simultaneous sensing or backup to enhance reliability.
-
High Accuracy: Eddy current sensing ensures precise, repeatable measurements across variable gaps and speeds.
-
Robust Construction: Durable materials resist vibration, temperature extremes, and harsh environments.
-
Flexible Installation: Threaded and flanged mounting options with customizable cable lengths.
-
Enhanced Safety: Provides reliable monitoring for critical machinery where failure prevention is essential.
-
Low Maintenance: Shielded cables and corrosion-resistant materials reduce environmental wear.
FAQ
-
What is the maximum operational temperature for the double probe?
The probe is rated for continuous operation from -40°C to +120°C. -
Can this probe measure high-speed rotating shafts above 50,000 RPM?
The maximum recommended shaft speed is 50,000 RPM. Exceeding this may affect measurement accuracy. -
What is the recommended gap range for optimal performance?
The typical gap range is 0.1 mm to 2.0 mm, which ensures linear response and high accuracy. -
How is the linearity / the probe specified?
The probe provides ±1% / full-scale linearity across the specified operating gap. -
What type / output signal does the probe provide?
It generates an analog signal with a typical sensitivity / 50 mV/mil. -
Is this probe compatible with standard Bently Nevada monitoring systems?
Yes, it is fully compatible with 3300 XL and other Bently Nevada monitoring systems. -
What environmental protections does the probe have?
The probe features IP67/NEMA 4X protection, safeguarding against dust, water ingress, and harsh industrial conditions. -
Can the probe be mounted in multiple orientations?
Yes, the probe supports both threaded and flanged mounting styles for flexible installation. -
What type / cable is used for signal transmission?
A shielded, twisted-pair cable is used to minimize electromagnetic interference and maintain signal integrity. -
How sensitive is the probe to shaft vibration?
The probe sensitivity is approximately 50 mV/mil, providing precise and repeatable vibration measurements.
Related 型号s (Same Series / Similar Type)
| 型号 Number | Type | Key Feature | 重量 |
|---|---|---|---|
| P1407030-02001 | Single Probe | Standard measurement | 0.20 kg |
| P1407030-02002 | Double Probe | Dual redundancy | 0.22 kg |
| P1407030-02003 | Triple Probe | Triple sensing | 0.28 kg |
| P1407030-02004 | Double Probe | Extended temperature range | 0.24 kg |
| P1407030-02005 | Single Probe | Compact design | 0.19 kg |
| P1407030-02007 | Double Probe | High-speed shaft monitoring | 0.23 kg |
Popular 型号s (Same 品牌)
| 型号 Number | Type | Key Feature | 重量 |
|---|---|---|---|
| 3300 XL Proximity Probe | Single/Double | Standard in XL monitoring | 0.25 kg |
| 3300 XL Vibration Probe | Single | High sensitivity | 0.22 kg |
| 3300 XL Speed Probe | Single | Shaft speed detection | 0.21 kg |
| 3300 XL Core Probe | Double | Redundant sensing | 0.23 kg |
| 3300 XL Position Probe | Single | Position tracking | 0.20 kg |
| 3300 XL Temperature Probe | Single | Temperature monitoring | 0.24 kg |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。