製品紹介
The Epro PR6424/002-130 + CON021 is a high-performance eddy current proximity probe system used for non-contact measurement / shaft displacement and vibration in critical rotating machinery. This configuration features a 16mm probe tip and is paired with the CON021 signal converter, forming an essential part / condition monitoring and machine protection systems.
As part / the EPRO PR6424 series, this sensor combination is widely used in industries where precision, reliability, and durability are non-negotiable. The probe is built with robust materials, suitable for demanding environments such as turbines, compressors, and other high-speed rotating machines. The included CON021 converter ensures accurate signal processing and seamless integration into control and diagnostic systems.
製品仕様
| Parameter | Specification |
|---|---|
| Product モデル | PR6424/002-130 + CON021 |
| Sensor Type | Eddy Current Proximity Probe |
| Sensor Head Diameter | 16 mm |
| Measurement Range | ±2 mm (nominal) |
| Sensitivity | Approx. 7.87 mV/µm (with CON021) |
| Frequency Response | 0 – 10 kHz |
| Material / Probe Housing | Stainless Steel (non-magnetic) |
| Mounting Thread | M14 x 1.5 |
| Probe Length | Approx. 80 mm |
| Cable Type | Shielded coaxial cable |
| Cable Length | Preconfigured (typically 5–10 meters) |
| Operating Temperature (Probe) | –35°C to +180°C |
| Operating Temperature (Converter) | –35°C to +75°C |
| Environmental Protection (Probe) | IP65 (properly installed) |
| Compliance Standards | CE, optional ATEX for hazardous zones |
| Output Signal | Linear voltage proportional to shaft gap |
| 重量 | 0.32 kg |
Applications
-
Steam Turbines: Shaft vibration and thermal expansion monitoring in real-time.
-
Gas Compressors: Critical protection and condition-based maintenance.
-
Centrifugal Pumps: Early detection / bearing wear and misalignment.
-
Electric Motors and Generators: Shaft orbit and position detection.
-
Gearboxes and Couplings: Fault diagnosis through vibration signal analysis.
-
Petrochemical Machinery: Monitoring for process-critical rotating assets under harsh conditions.
Product Advantages
-
Robust Engineering: The stainless steel sensor design /fers excellent durability in challenging industrial settings.
-
Non-お問い合わせ Measurement: Enables accurate monitoring with no mechanical wear or friction.
-
High Thermal Tolerance: Probe can endure up to 180°C, suitable for high-temperature machine zones.
-
Consistent Output: Paired with the CON021, the system delivers stable, linear voltage output.
-
EMI Shielding: Coaxial cabling ensures resistance to electromagnetic interference, crucial in electrically noisy environments.
-
Fast Response Time: Suitable for high-speed machinery due to wide frequency response.
-
Easy System Integration: Compatible with leading monitoring platforms and SCADA systems.
-
Field-Proven Performance: Widely adopted in global installations for over two decades.
-
ATEX-Ready Options: Variants available for use in explosive atmospheres in the oil & gas sector.
-
Reduced Downtime: サポートs predictive maintenance and reduces unscheduled shutdowns.
よくある質問 (FAQ)
-
What is the main use / the PR6424/002-130 + CON021 sensor system?
It’s primarily used for non-contact vibration and displacement monitoring in rotating machinery. -
What does the ‘002-130’ designation indicate?
It typically refers to the specific probe configuration, including length and cable orientation. -
Can this sensor system be used in explosive environments?
Yes, ATEX-certified versions are available for hazardous area installations. -
How does it connect to a condition monitoring system?
The sensor outputs a voltage signal via the CON021 converter, which can be fed into CMS or DCS systems. -
Is calibration required after installation?
No, the sensor is factory-calibrated. However, installation checks are recommended. -
What is the maximum cable length supported?
Standard systems support up to 10 meters without significant signal degradation. -
Can this model be used with older EPRO monitoring systems?
Yes, it maintains backward compatibility with many legacy EPRO platforms. -
What mounting hardware is recommended?
The sensor comes with M14 × 1.5 thread, and mounting brackets or holders should match this specification. -
What happens if the probe tip is damaged?
The probe is sealed and non-repairable. The entire probe 台 must be replaced. -
Does the sensor support dynamic vibration analysis?
Yes, it supports both static and dynamic measurements for comprehensive diagnostics.
Related モデルs from the Same Series
| モデル Number | 説明 | Tip Size | Temp Range | Cable Length |
|---|---|---|---|---|
| PR6424/000-140+CON021 | Standard probe with 16mm tip and CON021 | 16 mm | –35°C to +180°C | 5–10 m |
| PR6424/004-130+CON021 | Reinforced version for harsh conditions | 16 mm | –35°C to +200°C | 5–10 m |
| PR6424/010-140+CON021 | High-temp probe up to 220°C | 16 mm | –35°C to +220°C | 5–10 m |
| PR6424/002-030+CON021 | Same probe with shorter length | 16 mm | –35°C to +180°C | 3–5 m |
| PR6424/001-140+CON021 | Bent probe for angled installations | 16 mm | –35°C to +180°C | 5 m |
| PR6424/002-140+CON021 | Similar probe with extended shaft | 16 mm | –35°C to +180°C | 5–10 m |
Popular EPRO モデルs (Same ブランド)
| モデル Number | Function | Sensor Type | Application |
|---|---|---|---|
| PR6423/002-030+CON021 | Eddy current probe with 5mm tip | Eddy Current | Compact machinery |
| MMS3120/022-100 | Vibration monitoring module | Monitoring Module | Turbine & compressor systems |
| MMS6110/022-000 | Communication interface module | CMS Interface | Distributed monitoring |
| CON041 | Signal converter for PR6423/PR6424 probes | Converter | Signal processing |
| PR9268/302-000 | Vibration velocity sensor | Velocity (Piezoelectric) | Structural/machine vibration |
| PR6423/000-030+CON021 | Eddy current probe, 5mm tip | Eddy Current | Small shaft applications |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。
