製品紹介
The Bently Nevada 330930-045-01-00 is a non-contact eddy current proximity probe, part / the renowned 3300 XL series from Bently Nevada. This sensor is widely used for critical machine monitoring in industrial environments. It /fers high-precision shaft vibration and displacement measurements in rotating machinery, such as turbines, compressors, pumps, and motors. The 330930-045-01-00 comes with a probe tip, armor cable, and a connector, delivering consistent and accurate readings even in harsh conditions.
Designed with a 5mm tip and a 45-inch armored cable, this model is optimized for applications that require long cable runs without signal degradation. It interfaces with Bently Nevada proximitor sensors to provide linear and reliable outputs, enabling predictive maintenance and machinery protection in real time.
Technical Specifications
| Parameter | Details |
|---|---|
| モデル Number | 330930-045-01-00 |
| Cable Type | Armored |
| Material | 304 Stainless Steel (probe & armor) |
| Mounting Thread | 3/8-24 UNF |
| Operating Temperature Range | -51°C to +177°C (-60°F to +350°F) |
| Sensitivity | 7.87 mV/μm (200 mV/mil) typical |
| Linear Range | 2 mm (80 mils) |
| System Accuracy | ±5% / full-scale output |
| 重量 | 0.28 kg |
| Cable length | 4.5 m |
| Environmental Rating | IP68, oil-resistant, dustpro/ |
Applications
The 330930-045-01-00 proximity probe is extensively used in:
-
Power generation: Monitoring turbine shaft vibration and position.
-
Petrochemical plants: Detecting shaft displacement in compressors.
-
Industrial manufacturing: Ensuring alignment in motors and fans.
-
Oil & gas sector: Monitoring rotating equipment to prevent unplanned shutdowns.
-
Marine and shipbuilding: Detecting early signs / bearing or rotor issues.
-
Steel and metal processing: Used on rolling mills and high-speed motors.
This probe is an essential component in systems that demand real-time condition monitoring and machinery protection.
Product Advantages
-
High Accuracy and Repeatability: Maintains precise shaft position detection even under high temperatures and vibration.
-
Robust Construction: Armored cable and stainless steel materials provide long-term durability in industrial settings.
-
Wide Compatibility: Works seamlessly with Bently Nevada 3300 XL Proximitor systems.
-
Extended Cable Length: 45-inch cable allows flexible installation without compromising signal integrity.
-
Non-お問い合わせ Measurement: Reduces wear and prolongs life, especially in high-speed machinery.
-
Reliable in Harsh Environments: Resistant to oil, dirt, moisture, and corrosion.
よくある質問 (FAQs)
Q1: What is the main function / the 330930-045-01-00 proximity probe?
A1: It detects the relative motion and vibration / rotating shafts in machinery using non-contact eddy current technology.
Q2: Is this probe compatible with all Bently Nevada systems?
A2: It is specifically designed for use with the 3300 XL Proximitor Sensor system and may not be compatible with other series without modification.
Q3: Can this probe be used in hazardous or high-temperature environments?
A3: Yes, it is built to withstand temperatures up to +177°C and has a sealed design for oil and dust protection.
Q4: What does the “045” in the model number indicate?
A4: It signifies the probe cable length, which in this case is 45 inches.
Q5: How is the probe installed?
A5: It is mounted via a threaded tip (3/8-24 UNF) into a fixed bracket, positioned close to the rotating shaft.
Q6: Does the probe need calibration?
A6: No, it comes pre-calibrated from the factory, but system calibration with proximitor sensors is required during setup.
Q7: Is this probe reusable after removal?
A7: Yes, if undamaged. However, the armored cable should be inspected to ensure integrity before reinstallation.
Q8: Can it detect both vibration and shaft position?
A8: Yes, it provides data that can be used to measure both radial vibration and axial shaft position.
Q9: How does the armor help the probe?
A9: The armor protects the internal cable from mechanical damage, oil, and environmental exposure.
Q10: Is a longer cable length available?
A10: Yes, Bently Nevada /fers other variants with different lengths such as 60, 80, or 100 inches.
Related モデルs in the Same Series
| モデル | 説明 | Cable Length | Tip Size |
|---|---|---|---|
| 330930-060-01-00 | 5mm XL probe, 60-inch armored cable | 60 inches | 5 mm |
| 330930-080-01-00 | 5mm XL probe, 80-inch armored cable | 80 inches | 5 mm |
| 330930-100-01-00 | 5mm XL probe, 100-inch armored cable | 100 inches | 5 mm |
| 330930-045-02-00 | 5mm probe with reverse polarity connector | 45 inches | 5 mm |
| 330930-045-05-00 | 5mm probe, 45-inch length, 90° connector | 45 inches | 5 mm |
| 330930-045-01-CN | 5mm probe, 45-inch, China domestic version | 45 inches | 5 mm |
Popular Bently Nevada モデルs
| モデル | 説明 | Application | Key Feature |
|---|---|---|---|
| 330104-00-05-10-02-00 | Proximity probe, 8mm, 5m cable | General machinery monitoring | Rugged, wide temperature range |
| 330180-90-00 | Extension cable, 9 meters | Connects probe to proximitor | High-flex, armored cable |
| 3300 XL 8mm Proximity | 8mm proximity system | Turbines, compressors | Industry standard accuracy |
| 3500/42M | Proximitor Monitor Module | Vibration and position monitoring | Multi-channel, buffered output |
| 3500/22M | Transient Data Interface | System configuration & data access | Dual Ethernet ports |
| 330130-040-00-00 | Proximity probe extension cable | Extension for XL systems | 4-meter, standard cable |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。