見積もり (0)

Bently Nevada 330425-01-05 Accelerometer Acceleration Transducer

Overview The Bently Nevada 330425-01-05 is a rugged, industrial-grade accelerometer designed for casing acceleration measurements on critical rotating equipment. It is particularly suited for gear mes

品番: 13906 在庫あり
Bently Nevada 330425-01-05 Accelerometer Acceleration Transducer

製品仕様

発売時期Jul 08, 2026
メーカー Bently Nevada PLC
モデル 330425-01-05
型番 IN13906
状態100%新品
出荷港中国廈門
リードタイム1-3営業日
認証COO
配送パートナーDHL, UPS, TNT, FedEx and EMS.
保証 1年間
単価
$529.00
USD / ユニット
-
+
最小注文: 1 台
0.0


配送情報
一定金額以上のご注文で送料無料 $5,000
東部標準時午後3時までのご注文は当日発送いたします。
国際配送可能
Bently Nevada 330425-01-05 Accelerometer Acceleration Transducer Bently Nevada 330425-01-05 Accelerometer Acceleration Transducer Bently Nevada 330425-01-05 Accelerometer Acceleration Transducer Bently Nevada 330425-01-05 Accelerometer Acceleration Transducer

Overview

The Bently Nevada 330425-01-05 is a rugged, industrial-grade accelerometer designed for casing acceleration measurements on critical rotating equipment. It is particularly suited for gear mesh and bearing diagnostics where high dynamic range and precision are required.


Technical Specifications

Parameter Specification
モデル Number 330425-01-05
Sensitivity 25 mV/g (2.5 mV/m/s²) ±5%
Acceleration Range 735 m/s² (75 g) peak (10 Hz to 15 kHz)
Frequency Response 10 Hz to 15 kHz ±3 dB / 30 Hz to 10 kHz ±10%
Noise Floor 0.098 m/s² (0.01 g) rms
Transverse Sensitivity <5% / axial
Mounted Resonant Frequency >30 kHz
Operating Temperature Range -55°C to +121°C (-67°F to +250°F)
Shock Survivability 49,050 m/s² (5000 g) peak
Relative Humidity 100% condensing, hermetically sealed
Power Supply -24 ± 0.5 Vdc, 2 mA nominal, -8.5 ± 0.5 Vdc output bias
Connector Type 3-pin MIL-C-5015 receptacle
Material 316L Stainless Steel
IP Rating IP68 (Sensor only)
重量 100 g (0.1 kg)
Sensor Head Diameter 23 mm (0.93 in)
Height 59 mm (2.3 in), including mounting stud
Mounting Torque 4.1 N·m (3.0 ft·lb)
Mounting Orientation Any

Applications

  • Gear mesh vibration analysis

  • Bearing housing monitoring

  • Casing-mounted vibration sensing

  • API 670-compliant rotating machinery

  • Harsh industrial and petrochemical environments


Key Advantages

  • Wide amplitude range (up to 75 g peak)

  • Solid-state, hermetically sealed stainless-steel construction

  • Suitable for use in hazardous and explosive areas

  • IP68 environmental protection for sensor head

  • Minimal transverse and base strain sensitivity

  • Designed to meet API 670 guidelines


よくある質問 (FAQ)

Q1: What is the sensitivity rating / this model?
A1: 25 mV/g (±5%).

Q2: What is the peak acceleration range it can handle?
A2: Up to 75 g peak.

Q3: Is this sensor compliant with API 670?
A3: Yes, it adheres to API 670 specifications.

Q4: Can it be installed in any orientation?
A4: Yes, it supports installation in any direction.

Q5: What is the working temperature range?
A5: -55°C to +121°C (-67°F to +250°F).

Q6: What type / connector is used?
A6: A 3-pin MIL-C-5015 receptacle.

Q7: Is the device explosion-pro/ or intrinsically safe?
A7: Yes, it has CSA, ATEX, and IECEx approvals for hazardous zones.

Q8: What is its ingress protection level?
A8: IP68 (sensor only).

Q9: What is the material / the sensor housing?
A9: 316L stainless steel.

Q10: Does it require a specific mounting base?
A10: For older models (without “G” prefix serial numbers), a mounting base is recommended to reduce strain sensitivity.


Related モデルs (Same Series or Function)

モデル Number Sensitivity Acceleration Range Frequency Response 重量
330400-01-05 100 mV/g 50 g peak 10 Hz to 15 kHz 100 g
330500-01-05 10 mV/g 500 g peak 3 Hz to 20 kHz 95 g
330525-01-05 100 mV/g 50 g peak 10 Hz to 15 kHz 100 g
330780-51-00 100 mV/g 50 g peak 2 Hz to 10 kHz 110 g
330730-00-02 100 mV/g 50 g peak 10 Hz to 10 kHz 105 g
991-06-XX-01-01 500 mV/g 10 g peak 2 Hz to 10 kHz 85 g

Popular Bently Nevada モデルs

モデル Number 説明 Sensitivity Application 重量
3500/42M Proximitor Seismic Monitor Module N/A Shaft vibration monitoring 0.6 kg
3500/22M Transient Data Interface Module N/A System interface 0.5 kg
3300 XL 8mm Proximity Probe System N/A Shaft displacement monitoring 120 g
3500/15E Power Supply Module N/A Rack power supply 1.0 kg
330180-91-CN Proximitor Sensor N/A Vibration detection 95 g
990-04-XX-01-00 Velocity Transducer 20 mV/in/sec General-purpose velocity sensing 140 g

会社情報

E-mail: [email protected]

Mobile:メールでのお問い合わせ

Whatsapp:メールでのお問い合わせ

Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006

サービス内容

当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。

当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。

製品詳細については、お気軽にお電話にてお問い合わせください。

製品保証とお客様サポート

保証詳細
  • 2年間標準保証 – 材料および製造上の欠陥をカバー
  • オプション延長保証 – 最大5年まで延長可能
  • オンサイト技術サポート – 工場トレーニングを受けたエンジニアが対応
  • 交換プログラム – 48時間以内の優先交換
  • 継続的技術支援 – 全製品のライフタイムサポート
品質コンプライアンス
  • 100%テスト済み・検証済み – 出荷前に各ユニットを検査
  • ISO 9001認証取得 – 品質マネジメントシステム準拠
  • 環境コンプライアンス – RoHSおよびCE基準準拠
  • 国際安全認証 – UL、cUL、その他該当する認証
  • トレーサブル生産 – 完全なシリアルおよびバッチ追跡
返品・交換ポリシー
  • 30日間返品期間 – 未使用製品の返金
  • 再入庫手数料なし – 追加料金なしで返品処理
  • 返品送料無料 – 不良品または誤品の場合
  • 交換品先行発送 – 交換中のダウンタイムを最小化
  • 簡単RMA手続き – オンライン返品承認が可能
お客様の権利とサポート
  • プライスマッチ保証 – 30日間の製品価格保護
  • 優先在庫確保 – リピーター様向け優先在庫
  • 技術トレーニング – オンラインおよびオンサイトでの製品トレーニング
  • 統合支援 – PLC/DCS統合のエンジニアリングサポート
  • レガシー製品サポート – 製造中止モジュールの継続サービス
保証規約
保証対象:
  • 材料および製造上の欠陥
  • 通常使用下での部品故障
  • ファームウェアまたはソフトウェアの問題(アップデート提供)
  • ドキュメントの誤りまたは欠落
保証除外事項:
  • 誤った設置または不適切な使用
  • 無許可の改造または修理
  • 事故、誤用、または不注意による損傷
  • 経年による通常の摩耗
重要事項:
  • すべての保証または返品リクエストには購入証明が必要です
  • 返品の際は元の梱包材を保管してください
  • カスタム設定品または特注品は異なる返品条件が適用される場合があります
  • 国際配送には追加の手続きや配送条件が適用される場合があります

技術文書

Check out Bently Nevada 330425-01-05 Accelerometer Acceleration Transducer latest technical documentation.

お客様のレビュー

レビューを投稿

メールでのお問い合わせ [email protected] メールでのお問い合わせ Follow us on Facebook Subscribe on YouTube