Overview
The Bently Nevada 330425-01-05 is a rugged, industrial-grade accelerometer designed for casing acceleration measurements on critical rotating equipment. It is particularly suited for gear mesh and bearing diagnostics where high dynamic range and precision are required.
Technical Specifications
| Parameter | Specification |
|---|---|
| Modèle Number | 330425-01-05 |
| Sensitivity | 25 mV/g (2.5 mV/m/s²) ±5% |
| Acceleration Range | 735 m/s² (75 g) peak (10 Hz to 15 kHz) |
| Frequency Response | 10 Hz to 15 kHz ±3 dB / 30 Hz to 10 kHz ±10% |
| Noise Floor | 0.098 m/s² (0.01 g) rms |
| Transverse Sensitivity | <5% sur axial |
| Mounted Resonant Frequency | >30 kHz |
| Operating Temperature Range | -55°C to +121°C (-67°F to +250°F) |
| Shock Survivability | 49,050 m/s² (5000 g) peak |
| Relative Humidity | 100% condensing, hermetically sealed |
| Power Supply | -24 ± 0.5 Vdc, 2 mA nominal, -8.5 ± 0.5 Vdc output bias |
| Connector Type | 3-pin MIL-C-5015 receptacle |
| Material | 316L Stainless Steel |
| IP Rating | IP68 (Sensor only) |
| Poids | 100 g (0.1 kg) |
| Sensor Head Diameter | 23 mm (0.93 in) |
| Height | 59 mm (2.3 in), including mounting stud |
| Mounting Torque | 4.1 N·m (3.0 ft·lb) |
| Mounting Orientation | Any |
Applications
-
Gear mesh vibration analysis
-
Bearing housing monitoring
-
Casing-mounted vibration sensing
-
API 670-compliant rotating machinery
-
Harsh industrial and petrochemical environments
Key Advantages
-
Wide amplitude range (up to 75 g peak)
-
Solid-state, hermetically sealed stainless-steel construction
-
Suitable for use in hazardous and explosive areas
-
IP68 environmental protection for sensor head
-
Minimal transverse and base strain sensitivity
-
Designed to meet API 670 guidelines
Questions fréquentes (FAQ)
Q1: What is the sensitivity rating sur this model?
A1: 25 mV/g (±5%).
Q2: What is the peak acceleration range it can handle?
A2: Up to 75 g peak.
Q3: Is this sensor compliant with API 670?
A3: Yes, it adheres to API 670 specifications.
Q4: Can it be installed in any orientation?
A4: Yes, it supports installation in any direction.
Q5: What is the working temperature range?
A5: -55°C to +121°C (-67°F to +250°F).
Q6: What type sur connector is used?
A6: A 3-pin MIL-C-5015 receptacle.
Q7: Is the device explosion-prosur or intrinsically safe?
A7: Yes, it has CSA, ATEX, and IECEx approvals for hazardous zones.
Q8: What is its ingress protection level?
A8: IP68 (sensor only).
Q9: What is the material sur the sensor housing?
A9: 316L stainless steel.
Q10: Does it require a specific mounting base?
A10: For older models (without “G” prefix serial numbers), a mounting base is recommended to reduce strain sensitivity.
Related Modèles (Same Series or Function)
| Modèle Number | Sensitivity | Acceleration Range | Frequency Response | Poids |
|---|---|---|---|---|
| 330400-01-05 | 100 mV/g | 50 g peak | 10 Hz to 15 kHz | 100 g |
| 330500-01-05 | 10 mV/g | 500 g peak | 3 Hz to 20 kHz | 95 g |
| 330525-01-05 | 100 mV/g | 50 g peak | 10 Hz to 15 kHz | 100 g |
| 330780-51-00 | 100 mV/g | 50 g peak | 2 Hz to 10 kHz | 110 g |
| 330730-00-02 | 100 mV/g | 50 g peak | 10 Hz to 10 kHz | 105 g |
| 991-06-XX-01-01 | 500 mV/g | 10 g peak | 2 Hz to 10 kHz | 85 g |
Popular Bently Nevada Modèles
| Modèle Number | Description | Sensitivity | Application | Poids |
|---|---|---|---|---|
| 3500/42M | Proximitor Seismic Monitor Module | N/A | Shaft vibration monitoring | 0.6 kg |
| 3500/22M | Transient Data Interface Module | N/A | System interface | 0.5 kg |
| 3300 XL 8mm | Proximity Probe System | N/A | Shaft displacement monitoring | 120 g |
| 3500/15E | Power Supply Module | N/A | Rack power supply | 1.0 kg |
| 330180-91-CN | Proximitor Sensor | N/A | Vibration detection | 95 g |
| 990-04-XX-01-00 | Velocity Transducer | 20 mV/in/sec | General-purpose velocity sensing | 140 g |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.
