製品紹介
The Bently Nevada 330104-05-13-10-02-00 3300 XL 8 mm Proximity Probe is a precision sensor designed for non-contact measurement / shaft vibration and displacement in rotating machinery. Built on the reliable 3300 XL platform, this probe /fers robust performance, excellent signal stability, and superior resistance to harsh industrial environments. It is specifically engineered to provide consistent performance in applications involving turbines, compressors, pumps, and other critical machinery where accurate shaft position monitoring is essential.
Technical Specifications
| Parameter | Value |
|---|---|
| モデル | 330104-05-13-10-02-00 |
| Series | 3300 XL 8 mm Proximity Probe |
| Sensing Range | 8 mm nominal |
| Linearity | ±0.25% / full scale |
| Frequency Response | DC to 10 kHz |
| Operating Temp. | -35 °C to +177 °C |
| Storage Temp. | -55 °C to +100 °C |
| Cable Type | Triaxial, low-noise, molded |
| Total Length | 1 m |
| 重量 | 0.323 kg |
| Connector Type | Standard BNC / compatible with 3300 XL extension cables |
| Compliance | API 670 standard |
Product Applications
-
Shaft vibration monitoring in steam and gas turbines
-
Radial and axial displacement measurements in compressors
-
Bearing and seal monitoring in industrial pumps
-
状態 monitoring / motors and generators
-
Integration with Bently Nevada 3300 XL series monitoring systems
Product Advantages
-
High measurement accuracy: Maintains precision in harsh conditions.
-
Robust design: Resistant to oil, moisture, and contaminants.
-
API 670 compliance: Meets international standards for machinery protection.
-
Wide operating temperature range: Suitable for demanding industrial environments.
-
Compatibility: Fully compatible with 3300 XL extension cables and Proximitor sensors.
-
Stable output: Low noise and minimal drift for reliable long-term monitoring.
FAQ
Q1: What type / signal does this probe generate?
A1: The probe generates a voltage signal proportional to the shaft-to-probe gap displacement, which is processed by the Proximitor module.
Q2: Is the probe compatible with older Bently Nevada monitoring systems?
A2: Yes, it is backward-compatible with many older 3300 series systems, though optimal performance is achieved with 3300 XL Proximitors.
Q3: How does the probe handle electrical noise interference?
A3: It uses a triaxial low-noise cable design and shielding to minimize electrical interference.
Q4: Can the probe be used for thrust position measurements?
A4: Yes, it can measure both radial and axial shaft positions when properly installed.
Q5: What is the typical output sensitivity / the probe?
A5: The standard sensitivity is 200 mV per mil (7.87 mV per micron).
Q6: How is temperature stability achieved in this probe?
A6: The probe is constructed with specialized materials that ensure minimal thermal drift across its wide operating temperature range.
Q7: Is this probe suitable for hazardous area applications?
A7: Yes, certain configurations / the probe are available with approvals for hazardous environments depending on system requirements.
Q8: What Proximitor modules are compatible with this probe?
A8: It is fully compatible with 3300 XL Proximitor modules designed for 8 mm probes.
Q9: Does the probe require calibration before use?
A9: The probes are factory calibrated, but system-level calibration is recommended to ensure full compliance with API 670.
Q10: How does this probe ensure long-term durability in oil-contaminated environments?
A10: The molded cable design and hermetic sealing provide resistance against oil ingress and environmental contamination.
Recommended Related モデルs
| モデル Number | 説明 |
|---|---|
| 330104-05-12-10-02-00 | 3300 XL 8 mm Proximity Probe, 1 m length |
| 330104-05-10-50-11-00 | 3300 XL 8 mm Proximity Probe, 5 m length |
| 330104-05-12-90-02-CN | 3300 XL 8 mm Proximity Probe, 9 m length |
| 330104-05-11-90-11-00 | 3300 XL 8 mm Proximity Probe, 9 m, angled |
| 330104-04-12-10-02-00 | 3300 XL 8 mm Probe, standard configuration |
| 330104-04-12-90-02-CN | 3300 XL 8 mm Probe, extended configuration |
Popular モデルs from the Same ブランド
| モデル Number | 説明 |
|---|---|
| 3500/22M | Transient Data Interface Module |
| 3500/42M | Proximitor / Seismic Monitor |
| 3500/32M | Relay Module |
| 3500/50 | Tachometer Module |
| 330130-045-00-00 | Extension Cable for 3300 XL Proximity Probes |
| 330180-91-05 | Proximitor Sensor 3300 XL |
| 330103-00-12-10-02-05 | 3300 XL 5 mm Proximity Probe |
| 330106-05-30-10-02-05 | 3300 XL 11 mm Proximity Probe |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。