Product Overview
The Bently Nevada 330104-00-22-10-02-05 3300 XL 8 mm Proximity Probe is an industry-leading sensor designed to measure shaft vibration, relative position, and axial thrust in critical rotating machinery. Utilizing proven eddy current sensing technology, this probe forms part / the globally trusted 3300 XL series and delivers highly accurate, stable, and linear output signals, even under extreme operating conditions.
This particular configuration features a 1 meter probe cable length, non-armored construction, and an 8 mm probe tip, making it an ideal solution for applications requiring flexibility and excellent measurement performance.
Compatible with 3300 XL Proximitor Sensors and extension cables, the probe provides a consistent voltage output corresponding to shaft displacement. It is a vital component in machine protection and condition monitoring systems across industries like oil & gas, power generation, refining, chemicals, and heavy manufacturing.
製品仕様
| Parameter | Specification |
|---|---|
| モデル | 330104-00-22-10-02-05 |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Sensing Technology | Eddy current, non-contact |
| Probe Tip Diameter | 8 mm |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Thread Size | 3/8-24 UNF |
| Total Length | 1 meter |
| Cable Armor | Non-armored |
| Connector Type | Miniature coaxial connector |
| Target Material | 4140 steel (factory calibrated) |
| Measurement Range | 2 mm (80 mils), linear range |
| Scale Factor | 200 mV/mil (7.87 mV/μm) nominal |
| System Linear Range | 80 mils (2.0 mm) |
| Non-Linearity | ≤ ±0.75% / full scale (typical) |
| Frequency Response | 0 Hz to 10 kHz (±3 dB) |
| Operating Temperature (Probe) | -51 °C to +177 °C |
| Operating Temperature (System) | -35 °C to +120 °C |
| Humidity | 100% condensing, fully sealed |
| Shock / Vibration Tolerance | 10 g @ 10-2,000 Hz |
| Pressure Rating | 5 bar (sealed probe tip) |
| Certifications | CE, ATEX Zone 2, CSA, IECEx |
| 重量 | 0.323 kg |
Applications
The 330104-00-22-10-02-05 proximity probe is used across a wide range / rotating machinery in industries that depend on high asset reliability and uptime:
-
Gas and Steam Turbines
Continuous monitoring / shaft vibration and thrust position to prevent costly failures. -
Compressors (Centrifugal and Reciprocating)
Real-time measurement / shaft movement and bearing health. -
Electric Motors
Detecting imbalance, misalignment, and degradation / motor components. -
Industrial Pumps
Providing early warnings / excessive vibration or mechanical wear in pump systems. -
Fans and Blowers
Ensuring smooth, vibration-free operation and extending equipment life. -
Gearboxes
Monitoring relative shaft position for improved gearbox health diagnostics. -
Critical Rotating Equipment in Oil & Gas, Power Plants, and Refineries
Preventing unplanned shutdowns and improving maintenance efficiency.
Product Advantages
-
Exceptional Measurement Accuracy
Delivers highly linear, low-noise signals — critical for protection systems. -
Non-Armored Cable for Flexibility
Simplified installation where armored protection is unnecessary. -
Broad Temperature Range
Operates reliably from -51 °C to +177 °C — ideal for demanding environments. -
Industry Certifications
Approved for use in hazardous zones (CE, ATEX Zone 2, CSA, IECEx). -
Rugged Design
Sealed construction ensures full performance in high humidity, vibration, and shock-prone locations. -
Compatible with Global Standards
Integrates seamlessly with 3300 XL Proximitor Sensors and legacy Bently Nevada systems. -
Low Maintenance
Designed for years / reliable service with minimal recalibration. -
Highly Versatile
Suitable for diverse rotating equipment across industries. -
Proven in the Field
Backed by thousands / installations worldwide. -
Optimized Cable Length (22 ft)
Provides flexibility for various mounting configurations.
よくある質問 (FAQ)
-
What equipment can this probe monitor?
It is suitable for turbines, compressors, motors, pumps, fans, gearboxes, and many other rotating machines. -
How does it measure shaft vibration?
It outputs a voltage that is linearly proportional to shaft-to-probe distance. -
What’s the advantage / using a non-armored cable?
Easier routing and installation in clean or controlled environments. -
What is the rated cable length for this model?
1 meter. -
What certifications does it have?
CE, ATEX Zone 2, CSA, and IECEx — safe for use in explosive and hazardous areas. -
Does it require periodic recalibration?
No — designed for long-term operation with excellent stability. -
Is it compatible with older Bently Nevada Proximitor 台s?
Yes — backward compatible with most legacy 3300 series systems. -
What is the probe’s linear measurement range?
80 mils (2.0 mm). -
Can this probe operate in extreme temperatures?
Yes — rated from -51 °C to +177 °C at the probe tip. -
What is the recommended shaft target material?
4140 steel, or material calibrated to match Bently Nevada’s factory standard.
Related モデルs from the Same Series or カテゴリー
| モデル | Product Type | Cable Length | Armor Type | Dimensions & 重量 |
|---|---|---|---|---|
| 330104-00-22-10-02-05 | 3300 XL 8 mm Probe | 22 ft (6.71 m) | Non-armored | 8 mm tip, ~0.58 kg |
| 330104-00-20-05-02-00 | 3300 XL 8 mm Probe | 20 ft (6.10 m) | Armored | 8 mm tip, ~0.60 kg |
| 330104-00-15-10-01-CN | 3300 XL 8 mm Probe | 15 ft (4.57 m) | Non-armored | 8 mm tip, ~0.50 kg |
| 330104-00-25-05-02-00 | 3300 XL 8 mm Probe | 25 ft (7.62 m) | Armored | 8 mm tip, ~0.65 kg |
| 330104-00-10-10-01-CN | 3300 XL 8 mm Probe | 10 ft (3.05 m) | Non-armored | 8 mm tip, ~0.45 kg |
| 330104-00-05-05-02-00 | 3300 XL 8 mm Probe | 5 ft (1.52 m) | Armored | 8 mm tip, ~0.40 kg |
Popular モデルs from Bently Nevada Product Line
| モデル | Product Type | Application Area | Dimensions & 重量 |
|---|---|---|---|
| 3500/22M | Transient Data Interface Module | Machine Protection Systems | ~0.80 kg |
| 3500/42M | Proximitor/Seismic Monitor | Shaft vibration, bearing wear | ~1.20 kg |
| 3500/33 | RTD/TC Temperature Monitor | Motor winding / bearing temp | ~1.10 kg |
| 330130-040-00-00 | 3300 XL 8 mm Extension Cable | Drives matching probes | ~0.30 kg |
| 330180-50-00 | 3300 XL Proximitor Sensor | Drives 3300 XL 8 mm probes | ~0.50 kg |
| 3500/15 | Power Supply Module | 3500 Series Rack | ~1.50 kg |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。