製品紹介
The Bently Nevada 330103-05-10-02-00 3300 XL 8mm Proximity Probe is a precision-engineered transducer designed for accurate non-contact measurement / vibration, shaft displacement, and axial position in rotating machinery. As part / the 3300 XL series, this proximity probe is built to deliver exceptional performance in harsh industrial environments such as turbines, compressors, pumps, and generators.
The 330103-05-10-02-00 model utilizes eddy current sensing technology to detect the distance between the probe tip and the target surface, typically a conductive rotating shaft. This signal is then transmitted to a Proximitor® sensor, which converts the probe’s analog signal into a proportional voltage output, used by monitoring systems to assess machine health and detect potential faults.
Bently Nevada’s 3300 XL line is known for its stability, durability, and compatibility across a wide range / industrial applications. This specific model features superior linearity, low temperature drift, and excellent interchangeability among system components, ensuring long-term reliability and consistent system calibration.
Technical Specifications
| Parameter | 説明 |
|---|---|
| モデル Number | 330103-05-10-02-00 |
| Product Type | 3300 XL 8mm Proximity Probe |
| Sensing Principle | Eddy Current |
| Probe Tip Diameter | 8 mm (nominal) |
| Linear Range | 2.0 mm (80 mils) |
| System Range | Up to 2 mm linear, 4 mm total |
| Sensitivity | 7.87 mV/μm (200 mV/mil) |
| Nominal Gap | 1.02 mm (40 mils) |
| Frequency Response | 0 to 10 kHz |
| Temperature Range (Operating) | -35°C to +177°C |
| Temperature Coefficient | < 0.05%/°C / full scale |
| Probe Body Material | Stainless steel |
| Cable Type | Armored coaxial cable |
| Total Length | Optional |
| Connector Type | Miniature coaxial connector (standard) |
| Mounting Thread | M10 x 1.0 or 3/8-24 UNF (depending on option) |
| Target Material | Conductive, typically AISI 4140 steel |
| Compatible Driver | 3300 XL Proximitor Sensor (モデル 3300/NSv, 330180, etc.) |
| Insulation Resistance | >10 MΩ at 500 VDC |
| Shock and Vibration Resistance | 50 g peak, 10–2000 Hz |
| EMC Compliance | CE, EN 61326 |
| Ingress Protection | IP67 rated |
| 重量 | 0.323 kg |
Applications
The Bently Nevada 330103-05-10-02-00 3300 XL 8mm Proximity Probe is used across a wide variety / critical industrial applications where high-precision vibration monitoring and shaft displacement detection are essential. Common applications include:
-
Steam and Gas Turbines – Continuous monitoring / shaft vibration and thrust position for early detection / imbalance or misalignment.
-
Compressors – Measuring rotor motion and bearing wear to prevent mechanical failure.
-
Pumps – Monitoring shaft position and ensuring stable mechanical performance in heavy-duty pumping systems.
-
Motors and Generators – Providing dynamic and static measurements for predictive maintenance systems.
-
Industrial Fans and Blowers – Detecting excessive vibration that could lead to shaft bending or bearing degradation.
-
Gearboxes – Assessing misalignment and tooth wear by monitoring vibration amplitude and frequency response.
This probe is particularly suited for use in high-temperature or high-vibration environments, where standard probes may fail.
Product Advantages
-
High Precision and Stability – Exceptional linearity and repeatability ensure accurate displacement measurements.
-
Wide Temperature Tolerance – Designed for harsh conditions up to +177°C without compromising accuracy.
-
Robust Construction – Stainless steel body and armored cable ensure durability against mechanical stress.
-
優良 Signal Integrity – Shielded coaxial design minimizes electrical interference and signal loss.
-
Interchangeable Components – Compatible with other 3300 XL system elements without recalibration.
-
Fast Dynamic Response – サポートs a broad frequency range up to 10 kHz for real-time vibration analysis.
-
Proven Reliability – Field-tested across industries with exceptional long-term stability.
-
Compact Design – Slim form factor allows flexible installation in confined spaces.
-
Corrosion and Moisture Resistant – IP67 protection for reliable operation in harsh environments.
-
Global Industry Compliance – Certified for industrial monitoring systems worldwide.
FAQ
-
What sensing principle does the 330103-05-10-02-00 probe use?
It uses the eddy current principle, detecting changes in magnetic fields caused by distance variations between the probe tip and the target shaft. -
How is the probe connected to the monitoring system?
The probe connects to a Proximitor sensor via a coaxial cable, which then interfaces with the monitoring rack or data acquisition 台. -
What is the standard sensitivity / this probe?
The standard system sensitivity is 7.87 mV/μm (200 mV/mil), consistent across the 3300 XL 8mm system. -
Is this probe interchangeable with other 3300 XL components?
Yes, it is fully interchangeable with compatible 3300 XL probes, cables, and Proximitor sensors without recalibration. -
What kind / target materials are suitable for measurement?
The probe is designed for conductive materials, typically carbon steel or similar alloys with stable magnetic properties. -
How does temperature affect measurement accuracy?
The probe’s advanced compensation minimizes thermal drift, maintaining linearity across a wide temperature range. -
Can the probe operate in environments with strong electrical noise?
Yes, the coaxial cable and shielding effectively suppress EMI and RFI interference, ensuring clean signal transmission. -
What type / mounting is recommended for stable installation?
A rigid threaded mount, such as M10 x 1.0 or 3/8-24 UNF, is recommended to ensure precise alignment and minimal vibration coupling. -
Is calibration required after replacing the probe?
No recalibration is required if replacement components are from the same 3300 XL system and have matching configurations. -
What is the frequency response capability / the system?
The probe system supports vibration measurement up to 10 kHz, allowing detailed dynamic analysis / rotating machinery.
Related モデルs (Same Series)
| モデル Number | 説明 | Tip Diameter | Sensitivity | 重量 |
|---|---|---|---|---|
| 330103-00-07-10-02-05 | 3300 XL 8mm Proximity Probe | 8 mm | 7.87 mV/μm | 0.32 kg |
| 330103-05-08-10-02-00 | 3300 XL 8mm Short Probe | 8 mm | 7.87 mV/μm | 0.31 kg |
| 330104-00-10-10-02-05 | 3300 XL 11mm Probe | 11 mm | 7.87 mV/μm | 0.35 kg |
| 330105-02-12-10-02-00 | 3300 XL 25mm Probe | 25 mm | 7.87 mV/μm | 0.40 kg |
| 330106-05-10-02-05 | 3300 XL NSv Probe (Narrow Gap) | 5 mm | 7.87 mV/μm | 0.29 kg |
| 330107-05-10-02-00 | 3300 XL Reverse Mount Probe | 8 mm | 7.87 mV/μm | 0.33 kg |
Popular モデルs from the Same ブランド
| モデル Number | Product Name | Function | 重量 |
|---|---|---|---|
| 3500/15 | Power Supply Module | Powers 3500 rack systems | 1.0 kg |
| 3500/42M | Vibration Monitor Module | Monitors dynamic and static vibration | 1.2 kg |
| 330180-90-00 | Proximitor Sensor | Converts probe signal to voltage output | 0.25 kg |
| 3500/22M | Transient Data Interface Module | Transfers data to control systems | 1.4 kg |
| 330850-90-05 | Proximity Transducer Assembly | Shaft position and vibration monitoring | 0.45 kg |
| 330400-50-00 | Velomitor Velocity Sensor | Measures casing vibration velocity | 0.48 kg |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。