製品紹介
The Bently Nevada 330103-00-03-10-02-R0 is an advanced 8 mm proximity probe from the 3300 XL series, designed for high-precision vibration and position monitoring in rotating machinery. It /fers exceptional accuracy, durability, and ease / integration, making it ideal for critical applications in industries such as power generation, oil & gas, and manufacturing.
製品仕様
| Parameter | 説明 |
|---|---|
| モデル | 330103-00-03-10-02-R0 |
| Thread Type | M10 x 1 |
| Measurement Range | 8 mm |
| Overall Case Length | 30 mm |
| Total Length | 1.0 meter (3.3 feet) |
| Connector Type | Miniature coaxial ClickLoc connector |
| Cable Type | Standard cable |
| Sensitivity | 0.5 V/mm |
| Frequency Response | 0–10 kHz |
| Probe Case Material | AISI 303 or 304 stainless steel |
| 重量 | 0.323 kg |
Applications
-
Vibration Monitoring: Detects radial and axial vibrations in rotating machinery to prevent failures.
-
Shaft Position Measurement: Measures the position / shafts to ensure proper alignment and operation.
-
Keyphasor® and Speed Measurement: Provides accurate timing signals for synchronization and control systems.
-
API 670 Compliance: Meets the standards set by the American Petroleum Institute for machinery protection systems.
Product Advantages
-
High Accuracy: Provides precise measurements for critical machinery monitoring.
-
Interchangeability: Components are interchangeable without the need for individual calibration.
-
API 670 Compliance: Fully compliant with industry standards for machinery protection.
-
Robust Design: Built to withstand harsh industrial environments.
-
Easy Integration: Compatible with existing Bently Nevada systems and accessories.
FAQ
Q1: How do I properly install the 330103-00-03-10-02-R0 probe to ensure accurate measurements?
A1: Ensure the probe is securely mounted perpendicular to the shaft, maintaining the recommended gap. Avoid placing the probe near sources / electromagnetic interference.
Q2: Can this probe be used with other 3300 XL series monitoring systems?
A2: Yes, it is fully compatible with all standard 3300 XL series modules and monitoring systems.
Q3: What are the best practices for cable routing to minimize signal noise?
A3: Keep probe cables away from high-voltage lines and rotating machinery. Use shielded cable and maintain tight connectors.
Q4: How can I verify the probe is functioning correctly after installation?
A4: Use the system’s built-in self-test and check for proper Keyphasor® pulse output and vibration signal readings.
Q5: Is this probe suitable for high-speed rotating machinery?
A5: Yes, it is designed for high-speed applications up to the rated shaft RPM specified by the 3300 XL series.
Q6: How do I handle alignment issues between probe and shaft?
A6: Adjust the probe to ensure the sensing tip is centered and parallel to the shaft. Use the recommended feeler gauges for initial setup.
Q7: Can the probe operate in environments with moderate dust or moisture?
A7: Yes, the probe has a robust industrial design but avoid submerging it or exposing it to corrosive chemicals.
Q8: How do I detect a failing probe before it impacts machinery monitoring?
A8: Monitor signal consistency and Keyphasor® pulses. Anomalies like signal dropouts or excessive noise indicate potential probe issues.
Q9: Can this probe be replaced without recalibrating the monitoring system?
A9: Yes, as part / the 3300 XL series, it is interchangeable without individual recalibration.
Q10: What troubleshooting steps are recommended if vibration readings seem inaccurate?
A10: Check the gap between probe and shaft, ensure cables are correctly connected, verify system settings, and rule out electrical interference.
Recommended モデルs (Same Series or Related)
| モデル | 説明 |
|---|---|
| 330101-00-03-10-02-R0 | Standard 8 mm probe with M10 x 1 thread |
| 330102-00-03-10-02-R0 | 8 mm probe with armor, M10 x 1 thread |
| 330104-00-03-10-02-R0 | 8 mm probe with armor, M10 x 1 thread, extended temperature range |
| 330140-00-03-10-02-R0 | Smooth case 8 mm probe, M10 x 1 thread |
| 330191-00-03-10-02-R0 | Extended temperature range 8 mm probe |
| 330103-00-03-10-02-R0 | 10 mm probe, M10 x 1 thread |
Popular Bently Nevada モデルs
| モデル | 説明 |
|---|---|
| 330104-00-07-05-01-05 | Standard industrial module for reliable system operation |
| 330104-00-10-05-01-00 | High-capacity module for enhanced data processing |
| 330104-00-12-05-01-03 | Redundant module for critical applications |
| 330104-00-15-05-01-02 | High-speed module for real-time control |
| 330104-00-18-05-01-01 | Multi-protocol module for flexible integration |
| 330104-00-20-05-01-04 | Compact, low-power module for energy-efficient operation |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。