مقدمة المنتج
The Bently Nevada 330103-00-03-10-02-R0 is an advanced 8 mm proximity probe from the 3300 XL series, designed for high-precision vibration and position monitoring in rotating machinery. It منfers exceptional accuracy, durability, and ease من integration, making it ideal for critical applications in industries such as power generation, oil & gas, and manufacturing.
مواصفات المنتج
| Parameter | الوصف |
|---|---|
| الطراز | 330103-00-03-10-02-R0 |
| Thread Type | M10 x 1 |
| Measurement Range | 8 mm |
| Overall Case Length | 30 mm |
| Total Length | 1.0 meter (3.3 feet) |
| Connector Type | Miniature coaxial ClickLoc connector |
| Cable Type | Standard cable |
| Sensitivity | 0.5 V/mm |
| Frequency Response | 0–10 kHz |
| Probe Case Material | AISI 303 or 304 stainless steel |
| الوزن | 0.323 kg |
Applications
-
Vibration Monitoring: Detects radial and axial vibrations in rotating machinery to prevent failures.
-
Shaft Position Measurement: Measures the position من shafts to ensure proper alignment and operation.
-
Keyphasor® and Speed Measurement: Provides accurate timing signals for synchronization and control systems.
-
API 670 Compliance: Meets the standards set by the American Petroleum Institute for machinery protection systems.
Product Advantages
-
High Accuracy: Provides precise measurements for critical machinery monitoring.
-
Interchangeability: Components are interchangeable without the need for individual calibration.
-
API 670 Compliance: Fully compliant with industry standards for machinery protection.
-
Robust Design: Built to withstand harsh industrial environments.
-
Easy Integration: Compatible with existing Bently Nevada systems and accessories.
FAQ
Q1: How do I properly install the 330103-00-03-10-02-R0 probe to ensure accurate measurements?
A1: Ensure the probe is securely mounted perpendicular to the shaft, maintaining the recommended gap. Avoid placing the probe near sources من electromagnetic interference.
Q2: Can this probe be used with other 3300 XL series monitoring systems?
A2: Yes, it is fully compatible with all standard 3300 XL series modules and monitoring systems.
Q3: What are the best practices for cable routing to minimize signal noise?
A3: Keep probe cables away from high-voltage lines and rotating machinery. Use shielded cable and maintain tight connectors.
Q4: How can I verify the probe is functioning correctly after installation?
A4: Use the system’s built-in self-test and check for proper Keyphasor® pulse output and vibration signal readings.
Q5: Is this probe suitable for high-speed rotating machinery?
A5: Yes, it is designed for high-speed applications up to the rated shaft RPM specified by the 3300 XL series.
Q6: How do I handle alignment issues between probe and shaft?
A6: Adjust the probe to ensure the sensing tip is centered and parallel to the shaft. Use the recommended feeler gauges for initial setup.
Q7: Can the probe operate in environments with moderate dust or moisture?
A7: Yes, the probe has a robust industrial design but avoid submerging it or exposing it to corrosive chemicals.
Q8: How do I detect a failing probe before it impacts machinery monitoring?
A8: Monitor signal consistency and Keyphasor® pulses. Anomalies like signal dropouts or excessive noise indicate potential probe issues.
Q9: Can this probe be replaced without recalibrating the monitoring system?
A9: Yes, as part من the 3300 XL series, it is interchangeable without individual recalibration.
Q10: What troubleshooting steps are recommended if vibration readings seem inaccurate?
A10: Check the gap between probe and shaft, ensure cables are correctly connected, verify system settings, and rule out electrical interference.
Recommended الطرازs (Same Series or Related)
| الطراز | الوصف |
|---|---|
| 330101-00-03-10-02-R0 | Standard 8 mm probe with M10 x 1 thread |
| 330102-00-03-10-02-R0 | 8 mm probe with armor, M10 x 1 thread |
| 330104-00-03-10-02-R0 | 8 mm probe with armor, M10 x 1 thread, extended temperature range |
| 330140-00-03-10-02-R0 | Smooth case 8 mm probe, M10 x 1 thread |
| 330191-00-03-10-02-R0 | Extended temperature range 8 mm probe |
| 330103-00-03-10-02-R0 | 10 mm probe, M10 x 1 thread |
Popular Bently Nevada الطرازs
| الطراز | الوصف |
|---|---|
| 330104-00-07-05-01-05 | Standard industrial module for reliable system operation |
| 330104-00-10-05-01-00 | High-capacity module for enhanced data processing |
| 330104-00-12-05-01-03 | Redundant module for critical applications |
| 330104-00-15-05-01-02 | High-speed module for real-time control |
| 330104-00-18-05-01-01 | Multi-protocol module for flexible integration |
| 330104-00-20-05-01-04 | Compact, low-power module for energy-efficient operation |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.
