製品紹介
The Bently Nevada 330102-05-25-10-01-05 3300 XL 8 mm Proximity Probe is a high-precision sensor designed for non-contact measurement / shaft vibration and position in rotating machinery. As part / the 3300 XL Series, it provides reliable and continuous monitoring for critical industrial equipment, including turbines, compressors, and generators. The probe features an 8 mm tip, suitable for applications requiring tight installation tolerances and robust performance in harsh environments.
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Proximity Probe |
| Sensing Range | ±0.127 mm (±5 mils) standard |
| Linearity | ≤1% / full scale |
| Tip Diameter | 8 mm |
| Operating Temperature | -40°C to 120°C |
| Mounting Thread | M18 x 1.5 |
| Material | Stainless Steel |
| 重量 | 0.323 kg |
| Total Length | 1 m |
| Connector Type | 6-pin LEMO |
Applications
-
Vibration monitoring in steam and gas turbines
-
状態 monitoring in compressors and pumps
-
Generator rotor position tracking
-
High-speed industrial rotating machinery diagnostics
-
Critical plant equipment for oil, gas, and power generation
-
Feedback systems for vibration protection relays
Advantages
-
High accuracy and low linearity error ensure reliable measurements.
-
Robust 8 mm probe tip designed for heavy-duty industrial environments.
-
Wide operating temperature range supports diverse industrial conditions.
-
Corrosion-resistant stainless steel construction for extended service life.
-
Compatible with standard 3300 XL monitoring systems for easy integration.
-
Flexible cable options allow installation in constrained or remote locations.
FAQ
Q1: What is the probe’s frequency response range?
A1: The 3300 XL 8 mm Proximity Probe operates effectively from 0 Hz up to 25 kHz, supporting high-speed shaft monitoring.
Q2: Can this probe be used in explosive environments?
A2: Yes, when paired with an intrinsically safe barrier and proper certification, it can be used in hazardous locations.
Q3: What is the minimum radial clearance for accurate measurement?
A3: For optimal performance, the probe should be installed with a radial clearance / 0.05–0.25 mm from the shaft.
Q4: Does the probe support dual-channel vibration measurement?
A4: It is compatible with dual-channel 3300 XL systems, allowing simultaneous position and vibration monitoring.
Q5: What is the recommended mounting orientation?
A5: The probe can be mounted in any orientation; however, alignment with the monitored shaft centerline is critical.
Q6: How does cable length affect signal accuracy?
A6: Standard 1 m cables maintain signal integrity; longer cables may require signal conditioning to prevent attenuation.
Q7: Can the probe withstand shaft misalignment?
A7: Minor misalignments are tolerated, but large deviations can reduce measurement accuracy and increase wear.
Q8: Is the probe compatible with non-ferrous shafts?
A8: Yes, it functions with both ferrous and non-ferrous shafts, though calibration may differ slightly.
Q9: What type / output does the probe provide?
A9: The probe provides a variable inductive AC output proportional to the gap between the probe tip and shaft.
Q10: How does temperature affect probe readings?
A10: The probe is rated for -40°C to 120°C, and readings remain accurate across this range with minor temperature compensation.
Recommended 6 Same-Series or Related モデルs
| モデル Number | Tip Diameter | Sensing Range | Connector Type | Notes |
|---|---|---|---|---|
| 330102-05-25-10-02-05 | 8 mm | ±0.127 mm | 6-pin LEMO | Standard variant |
| 330102-04-25-10-01-05 | 8 mm | ±0.127 mm | 6-pin LEMO | Shorter cable option |
| 330102-03-25-10-02-05 | 8 mm | ±0.127 mm | 6-pin LEMO | High-temperature version |
| 330102-05-25-15-01-05 | 8 mm | ±0.254 mm | 6-pin LEMO | Extended range |
| 330102-05-30-10-01-05 | 8 mm | ±0.127 mm | 6-pin LEMO | For high-speed shafts |
| 330102-05-25-10-03-05 | 8 mm | ±0.127 mm | 6-pin LEMO | Longer cable variant |
6 Popular モデルs from the Same ブランド
| モデル Number | Tip Diameter | Sensing Range | Cable Length | Notes |
|---|---|---|---|---|
| 330102-00-16-90-02-05 | 8 mm | ±0.127 mm | 3 m | Standard 3300 XL probe |
| 330102-00-90-10-02-00 | 8 mm | ±0.127 mm | 3 m | High linearity |
| 330102-00-88-10-02-05 | 8 mm | ±0.127 mm | 3 m | Vibration optimized |
| 330102-00-80-10-01-00 | 8 mm | ±0.127 mm | 3 m | Standard industrial use |
| 330102-00-79-10-02-05 | 8 mm | ±0.127 mm | 3 m | High-temperature version |
| 330102-00-05-25-10-01-05 | 8 mm | ±0.127 mm | 3 m | Compact design |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。