製品紹介
The Bently Nevada 330102-00-60-05-01-CN is part / the 3300 XL 8 mm Proximity Transducer System, developed for reliable and accurate vibration and position monitoring in rotating machinery. This probe assembly is widely used in turbine, compressor, pump, and motor applications across various industries including oil & gas, petrochemicals, power generation, and heavy manufacturing.
The 3300 XL series is renowned for its rugged design, superior performance, and long-term reliability, even in demanding industrial environments. The 330102 probe features a threaded body and includes a standard 8 mm tip, optimized for use with non-contact measurement systems and proximity transducer drivers like the 3300 XL extension cables and Proximitor® sensors.
The “CN” suffix indicates China-specific compliance and regional designation, making it suitable for localized deployments while retaining full compatibility with global Bently Nevada systems.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | 3300 XL 8 mm Proximity Probe |
| 型番 | 330102-00-60-05-01-CN |
| Series | Bently Nevada 3300 XL |
| Probe Tip Diameter | 8 mm |
| Thread Size | 3/8-24 UNF (standard threaded housing) |
| Total Length | 0.5 meter |
| Connector Type | Miniature coaxial connector (for extension cable) |
| Target Material | 4140 steel (calibrated at the factory for this standard material) |
| Linear Range | 2 mm (80 mils) nominal |
| System Accuracy | ±0.076 mm (±3 mils) typical when used with matching extension cable and Proximitor® |
| Frequency Response | Up to 10 kHz (mechanical system-dependent) |
| Mounting Type | Threaded mounting with lock nut |
| Operating Temperature | −35°C to +177°C (−31°F to +350°F) |
| Humidity Range | 0 to 95%, non-condensing |
| Vibration Tolerance | 10 g peak, 10–2,000 Hz |
| Shock Survival | 1000 g, 1 ms duration |
| Protection Class | IP65 when installed with proper connector sealing |
| 重量 | 0.161 kg |
Applications
The 330102-00-60-05-01-CN proximity probe is suited for a broad range / rotating machinery and critical asset monitoring in industrial applications, including:
-
Steam and Gas Turbines – Shaft position and vibration monitoring to prevent catastrophic failures.
-
Compressors – Detection / rotor-to-stator contact or excessive radial displacement.
-
Centrifugal and Reciprocating Pumps – Early warning / mechanical wear or misalignment.
-
Industrial Fans and Blowers – Continuous tracking / shaft movement and imbalance.
-
Electric Motors and Generators – Monitoring bearing and rotor conditions for predictive maintenance.
-
Gearboxes and Speed Reducers – Indicating abnormal movement caused by gear tooth wear.
Product Advantages
-
Superior Accuracy and Repeatability – Engineered for precise measurements in the most critical applications.
-
Industry Standard 8 mm Tip – Ensures compatibility with a wide range / Bently Nevada systems and accessories.
-
High Temperature Tolerance – Withstands extreme thermal environments without signal degradation.
-
Threaded Mount Design – Secure installation and easy adjustability in tight spaces.
-
Corrosion and Moisture Resistant – Designed with environmental sealing for industrial use.
-
Seamless System Integration – Functions with 3300 XL extension cables and Proximitor® sensors for full-system reliability.
-
Localized Compliance – The “CN” model variant meets China-specific industrial and regulatory requirements.
よくある質問 (FAQ)
-
What is the primary function / this probe?
It measures the distance between the probe tip and a metallic surface (e.g., a rotating shaft) without contact. -
Can I use this probe with any Bently Nevada system?
It is specifically designed for use with 3300 XL extension cables and Proximitor® sensors for best accuracy. -
Is this model different from standard 330102 probes?
Functionally it’s the same, but the “CN” suffix indicates regional compliance for China. -
What is the typical linear range for this probe?
Approximately 2 mm (80 mils), depending on system calibration and target material. -
What kind / environments can this probe operate in?
It operates in temperatures up to 177°C and resists moisture, vibration, and industrial contaminants. -
Can the cable be extended beyond 1.5 meters?
Not directly. You must use the designated extension cables for proper system calibration. -
Does it come pre-calibrated?
Yes, it is factory calibrated for a standard 4140 steel target and specified system components. -
How should it be installed?
Use threaded mounting with a lock nut and maintain a consistent gap for accurate readings. -
What is the effect / temperature on accuracy?
The probe is thermally compensated, but it should be used within its rated temperature range. -
Can I use this probe in explosive environments?
It depends on the system certification. The probe alone is not intrinsically safe—check system-wide compliance.
Related モデルs (Same Series or Similar Function)
| モデル | 説明 | Cable Length | Thread Type | Region Code |
|---|---|---|---|---|
| 330102-00-50-05-01 | 3300 XL 8 mm Probe | 1.27 m (50 in) | 3/8-24 UNF | Global |
| 330102-00-80-10-01 | 3300 XL Probe with longer cable | 2.03 m (80 in) | 3/8-24 UNF | Global |
| 330104-00-12-10-01 | 5 mm Probe for tight spaces | 0.3 m (12 in) | M10 | Global |
| 330103-00-60-10-01 | Probe with armored cable | 1.5 m (60 in) | 1/4-28 UNF | Global |
| 330105-02-12-10-02 | High-pressure probe variant | 0.3 m (12 in) | 3/8-24 UNF | Global |
| 330102-00-60-05-01-US | US region version / the same model | 1.5 m (60 in) | 3/8-24 UNF | US |
Popular Bently Nevada モデルs (その他 Series)
| モデル | Product Type | Application | Form Factor |
|---|---|---|---|
| 3500/22M | Transient Data Interface | Real-time machinery monitoring | Rack-mount module |
| 3500/42M | Proximitor®/Seismic Monitor | Vibration and axial position | 4-channel rack module |
| 3500/15 | Power Supply Module | Powering 3500 systems | High-density rack mount |
| 3701/55 | 状態 Monitoring Relay | Standalone machine protection | Compact DIN rail |
| 190501-00-00 | Velomitor® Piezo Velocity Sensor | Seismic vibration measurement | Industrial-grade sensor |
| 330180-91-05 | Extension Cable for XL Probes | Cable extension for probes | 5 meters, coaxial |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。
