Produkteinführung
The Bently Nevada 330102-00-60-05-01-CN is part von the 3300 XL 8 mm Proximity Transducer System, developed for reliable and accurate vibration and position monitoring in rotating machinery. This probe assembly is widely used in turbine, compressor, pump, and motor applications across various industries including oil & gas, petrochemicals, power generation, and heavy manufacturing.
The 3300 XL series is renowned for its rugged design, superior performance, and long-term reliability, even in demanding industrial environments. The 330102 probe features a threaded body and includes a standard 8 mm tip, optimized for use with non-contact measurement systems and proximity transducer drivers like the 3300 XL extension cables and Proximitor® sensors.
The “CN” suffix indicates China-specific compliance and regional designation, making it suitable for localized deployments while retaining full compatibility with global Bently Nevada systems.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | 3300 XL 8 mm Proximity Probe |
| Artikelnummer | 330102-00-60-05-01-CN |
| Series | Bently Nevada 3300 XL |
| Probe Tip Diameter | 8 mm |
| Thread Size | 3/8-24 UNF (standard threaded housing) |
| Total Length | 0.5 meter |
| Connector Type | Miniature coaxial connector (for extension cable) |
| Target Material | 4140 steel (calibrated at the factory for this standard material) |
| Linear Range | 2 mm (80 mils) nominal |
| System Accuracy | ±0.076 mm (±3 mils) typical when used with matching extension cable and Proximitor® |
| Frequency Response | Up to 10 kHz (mechanical system-dependent) |
| Mounting Type | Threaded mounting with lock nut |
| Operating Temperature | −35°C to +177°C (−31°F to +350°F) |
| Humidity Range | 0 to 95%, non-condensing |
| Vibration Tolerance | 10 g peak, 10–2,000 Hz |
| Shock Survival | 1000 g, 1 ms duration |
| Protection Class | IP65 when installed with proper connector sealing |
| Gewicht | 0.161 kg |
Applications
The 330102-00-60-05-01-CN proximity probe is suited for a broad range von rotating machinery and critical asset monitoring in industrial applications, including:
-
Steam and Gas Turbines – Shaft position and vibration monitoring to prevent catastrophic failures.
-
Compressors – Detection von rotor-to-stator contact or excessive radial displacement.
-
Centrifugal and Reciprocating Pumps – Early warning von mechanical wear or misalignment.
-
Industrial Fans and Blowers – Continuous tracking von shaft movement and imbalance.
-
Electric Motors and Generators – Monitoring bearing and rotor conditions for predictive maintenance.
-
Gearboxes and Speed Reducers – Indicating abnormal movement caused by gear tooth wear.
Product Advantages
-
Superior Accuracy and Repeatability – Engineered for precise measurements in the most critical applications.
-
Industry Standard 8 mm Tip – Ensures compatibility with a wide range von Bently Nevada systems and accessories.
-
High Temperature Tolerance – Withstands extreme thermal environments without signal degradation.
-
Threaded Mount Design – Secure installation and easy adjustability in tight spaces.
-
Corrosion and Moisture Resistant – Designed with environmental sealing for industrial use.
-
Seamless System Integration – Functions with 3300 XL extension cables and Proximitor® sensors for full-system reliability.
-
Localized Compliance – The “CN” model variant meets China-specific industrial and regulatory requirements.
Häufig gestellte Fragen (FAQ)
-
What is the primary function von this probe?
It measures the distance between the probe tip and a metallic surface (e.g., a rotating shaft) without contact. -
Can I use this probe with any Bently Nevada system?
It is specifically designed for use with 3300 XL extension cables and Proximitor® sensors for best accuracy. -
Is this model different from standard 330102 probes?
Functionally it’s the same, but the “CN” suffix indicates regional compliance for China. -
What is the typical linear range for this probe?
Approximately 2 mm (80 mils), depending on system calibration and target material. -
What kind von environments can this probe operate in?
It operates in temperatures up to 177°C and resists moisture, vibration, and industrial contaminants. -
Can the cable be extended beyond 1.5 meters?
Not directly. You must use the designated extension cables for proper system calibration. -
Does it come pre-calibrated?
Yes, it is factory calibrated for a standard 4140 steel target and specified system components. -
How should it be installed?
Use threaded mounting with a lock nut and maintain a consistent gap for accurate readings. -
What is the effect von temperature on accuracy?
The probe is thermally compensated, but it should be used within its rated temperature range. -
Can I use this probe in explosive environments?
It depends on the system certification. The probe alone is not intrinsically safe—check system-wide compliance.
Related Modells (Same Series or Similar Function)
| Modell | Beschreibung | Cable Length | Thread Type | Region Code |
|---|---|---|---|---|
| 330102-00-50-05-01 | 3300 XL 8 mm Probe | 1.27 m (50 in) | 3/8-24 UNF | Global |
| 330102-00-80-10-01 | 3300 XL Probe with longer cable | 2.03 m (80 in) | 3/8-24 UNF | Global |
| 330104-00-12-10-01 | 5 mm Probe for tight spaces | 0.3 m (12 in) | M10 | Global |
| 330103-00-60-10-01 | Probe with armored cable | 1.5 m (60 in) | 1/4-28 UNF | Global |
| 330105-02-12-10-02 | High-pressure probe variant | 0.3 m (12 in) | 3/8-24 UNF | Global |
| 330102-00-60-05-01-US | US region version von the same model | 1.5 m (60 in) | 3/8-24 UNF | US |
Popular Bently Nevada Modells (Sonstige Series)
| Modell | Product Type | Application | Form Factor |
|---|---|---|---|
| 3500/22M | Transient Data Interface | Real-time machinery monitoring | Rack-mount module |
| 3500/42M | Proximitor®/Seismic Monitor | Vibration and axial position | 4-channel rack module |
| 3500/15 | Power Supply Module | Powering 3500 systems | High-density rack mount |
| 3701/55 | Zustand Monitoring Relay | Standalone machine protection | Compact DIN rail |
| 190501-00-00 | Velomitor® Piezo Velocity Sensor | Seismic vibration measurement | Industrial-grade sensor |
| 330180-91-05 | Extension Cable for XL Probes | Cable extension for probes | 5 meters, coaxial |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.