製品紹介
The Bently Nevada 330101-00-45-05-02-00 is a part / the 3300 XL 8mm Proximity Transducer System, a globally recognized standard for non-contact shaft vibration and position monitoring in rotating machinery. This particular model includes a 0.5 meter unarmored probe and is designed to deliver accurate, high-resolution displacement measurements using eddy current sensing technology.
Specifically engineered to operate reliably in demanding industrial environments such as turbines, compressors, motors, and pumps, this probe plays a critical role in predictive maintenance and machinery protection strategies. Combined with a matching extension cable and Proximitor® sensor, it forms a complete system with industry-proven performance.
製品仕様
| Parameter | Specification |
|---|---|
| モデル Number | 330101-00-45-05-02-00 |
| Series | 3300 XL 8mm Proximity Transducer System |
| Measurement Principle | Eddy Current, Non-contact displacement measurement |
| Probe Tip Diameter | 8 mm |
| Thread Size | 3/8-24 UNF-2A (forward mount) |
| Total Length | 0.5 meter |
| Cable Type | Unarmored |
| Connector | ClickLoc Stainless Steel |
| Target Material | AISI 4140 Steel (standard calibration) |
| Sensitivity | 200 mV/mil (7.87 mV/μm) |
| Linear Range | 0.5 to 2.0 mm (20 to 80 mils) |
| Total System Length | Specified by probe, extension, and proximitor combination |
| Frequency Response | 0 to 10 kHz (-3dB, system dependent) |
| Operating Temperature Range | -35°C to +177°C (-31°F to +350°F) |
| Storage Temperature Range | -51°C to +177°C (-60°F to +350°F) |
| Housing Material | Stainless Steel |
| Ingress Protection | IP65 (with proper sealing and installation) |
| 重量 | 0.323 kg |
Product Applications
The Bently Nevada 330101-00-45-05-02-00 is designed for real-time condition monitoring in high-value rotating equipment. Its most common industrial applications include:
-
Steam and Gas Turbines – For radial and axial shaft position monitoring to detect early-stage wear, rotor bow, or thermal growth.
-
Compressors (Centrifugal & Axial) – Monitoring rotor vibration and alignment issues to prevent unplanned shutdowns.
-
Industrial Motors and Generators – Ensures that shaft deflection does not cause damage to internal components.
-
Large Pumps – Protects against seal failures by monitoring shaft movement.
-
Gearboxes – Enables detection / gear mesh issues, misalignment, and bearing faults.
-
Fans and Blowers – Tracks imbalance and vibration trends to optimize uptime and reduce maintenance costs.
Product Advantages
-
Non-contact Measurement: Prevents mechanical wear, suitable for continuous long-term use.
-
High Precision: Delivers accurate and linear measurements across a broad temperature range.
-
Robust Construction: Stainless steel housing ensures durability in harsh and hazardous industrial environments.
-
Seamless Integration: Fully compatible with 3300 XL system including extension cables and Proximitor sensors.
-
ClickLoc Connector: Ensures reliable and secure connections resistant to vibration-induced loosening.
-
Broad Compatibility: Optimized for use with a variety / machinery and materials (standard target: AISI 4140).
-
Temperature Resilience: Operates effectively across extreme ambient and process temperatures.
-
Fast Response Time: Capable / monitoring fast dynamic changes in shaft behavior.
-
Low Maintenance: Designed for ease / installation, calibration, and long maintenance intervals.
-
Global Standard: Accepted and trusted in industries worldwide for machine protection systems.
よくある質問 (FAQ)
-
What is the purpose / the 330101-00-45-05-02-00 probe?
It measures the proximity (distance) between the probe tip and a conductive shaft to monitor vibration and position in rotating machinery. -
Can this probe be used in high-temperature environments?
Yes, it supports operation up to +177°C, making it suitable for many high-temperature industrial applications. -
Does it require a matching proximitor and extension cable?
Yes, this probe is part / a three-component system and must be paired with specific 3300 XL cables and Proximitor sensors. -
Is this model suitable for forward mounting only?
Correct, this variant uses a forward mount configuration and is threaded for installation from the machine exterior. -
What materials can it sense?
Standard calibration is for AISI 4140 steel, but custom calibrations are possible for other conductive targets. -
Is the cable replaceable or field-repairable?
No, the probe cable is fixed. If damaged, the entire probe needs replacement. -
Can the system detect bearing failures?
Indirectly, yes—by measuring shaft vibration, it can identify signs / bearing wear or failure. -
What’s the minimum measurable distance?
The linear operating range begins at 0.5 mm from the target surface. -
Is it compatible with older Bently Nevada systems?
It is optimized for the 3300 XL system and may not be compatible with legacy systems like the 7200 series. -
How do I ensure proper sealing for IP65 protection?
Use approved gaskets, sealing compounds, and proper cable glands as per Bently Nevada’s installation guidelines.
Related モデルs from the Same Series
| モデル Number | Cable Length | Mount Style | Connector Type | Notes |
|---|---|---|---|---|
| 330101-00-40-05-02-00 | 40 inches | Forward Mount | ClickLoc | Similar functionality, shorter cable |
| 330101-00-50-05-02-00 | 50 inches | Forward Mount | ClickLoc | For extended reach installations |
| 330101-00-60-05-02-00 | 60 inches | Forward Mount | ClickLoc | Used in large-frame equipment |
| 330101-00-45-10-02-00 | 45 inches | Reverse Mount | ClickLoc | Alternate mounting configuration |
| 330104-00-08-10-02-00 | 8 meters | Armored Probe | ClickLoc | Harsh environments, extended range |
| 330103-00-08-10-02-00 | 8 meters | Extension Cable | N/A | For probe-to-proximitor connection |
Popular Bently Nevada モデルs (Same ブランド)
| モデル Number | Product Type | Function | Key Feature |
|---|---|---|---|
| 3500/42M | Proximitor Monitor | Vibration Monitoring | 4-channel system with buffered output |
| 3500/25 | Keyphasor Module | Speed and Phase Measurement | Dual-channel, essential for rotating machines |
| 3500/22M | Transient Data Interface | Data Communication Interface | Ethernet support, transient analysis |
| 330103-00-06-10-02-00 | Extension Cable (6m) | Probe System Interconnect | Essential for system matching |
| 7200-50 Series | Proximity Transducer | Displacement Monitoring | Legacy system, durable and proven |
| 330104-00-05-10-02-00 | 5-meter Proximity Probe | Vibration and Position Sensing | Armored cable for rugged installations |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。