Présentation du produit
The Bently Nevada 330101-00-45-05-02-00 is a part sur the 3300 XL 8mm Proximity Transducer System, a globally recognized standard for non-contact shaft vibration and position monitoring in rotating machinery. This particular model includes a 0.5 meter unarmored probe and is designed to deliver accurate, high-resolution displacement measurements using eddy current sensing technology.
Specifically engineered to operate reliably in demanding industrial environments such as turbines, compressors, motors, and pumps, this probe plays a critical role in predictive maintenance and machinery protection strategies. Combined with a matching extension cable and Proximitor® sensor, it forms a complete system with industry-proven performance.
Spécifications du produit
| Parameter | Specification |
|---|---|
| Modèle Number | 330101-00-45-05-02-00 |
| Series | 3300 XL 8mm Proximity Transducer System |
| Measurement Principle | Eddy Current, Non-contact displacement measurement |
| Probe Tip Diameter | 8 mm |
| Thread Size | 3/8-24 UNF-2A (forward mount) |
| Total Length | 0.5 meter |
| Cable Type | Unarmored |
| Connector | ClickLoc Stainless Steel |
| Target Material | AISI 4140 Steel (standard calibration) |
| Sensitivity | 200 mV/mil (7.87 mV/μm) |
| Linear Range | 0.5 to 2.0 mm (20 to 80 mils) |
| Total System Length | Specified by probe, extension, and proximitor combination |
| Frequency Response | 0 to 10 kHz (-3dB, system dependent) |
| Operating Temperature Range | -35°C to +177°C (-31°F to +350°F) |
| Storage Temperature Range | -51°C to +177°C (-60°F to +350°F) |
| Housing Material | Stainless Steel |
| Ingress Protection | IP65 (with proper sealing and installation) |
| Poids | 0.323 kg |
Product Applications
The Bently Nevada 330101-00-45-05-02-00 is designed for real-time condition monitoring in high-value rotating equipment. Its most common industrial applications include:
-
Steam and Gas Turbines – For radial and axial shaft position monitoring to detect early-stage wear, rotor bow, or thermal growth.
-
Compressors (Centrifugal & Axial) – Monitoring rotor vibration and alignment issues to prevent unplanned shutdowns.
-
Industrial Motors and Generators – Ensures that shaft deflection does not cause damage to internal components.
-
Large Pumps – Protects against seal failures by monitoring shaft movement.
-
Gearboxes – Enables detection sur gear mesh issues, misalignment, and bearing faults.
-
Fans and Blowers – Tracks imbalance and vibration trends to optimize uptime and reduce maintenance costs.
Product Advantages
-
Non-contact Measurement: Prevents mechanical wear, suitable for continuous long-term use.
-
High Precision: Delivers accurate and linear measurements across a broad temperature range.
-
Robust Construction: Stainless steel housing ensures durability in harsh and hazardous industrial environments.
-
Seamless Integration: Fully compatible with 3300 XL system including extension cables and Proximitor sensors.
-
ClickLoc Connector: Ensures reliable and secure connections resistant to vibration-induced loosening.
-
Broad Compatibility: Optimized for use with a variety sur machinery and materials (standard target: AISI 4140).
-
Temperature Resilience: Operates effectively across extreme ambient and process temperatures.
-
Fast Response Time: Capable sur monitoring fast dynamic changes in shaft behavior.
-
Low Maintenance: Designed for ease sur installation, calibration, and long maintenance intervals.
-
Global Standard: Accepted and trusted in industries worldwide for machine protection systems.
Questions fréquentes (FAQ)
-
What is the purpose sur the 330101-00-45-05-02-00 probe?
It measures the proximity (distance) between the probe tip and a conductive shaft to monitor vibration and position in rotating machinery. -
Can this probe be used in high-temperature environments?
Yes, it supports operation up to +177°C, making it suitable for many high-temperature industrial applications. -
Does it require a matching proximitor and extension cable?
Yes, this probe is part sur a three-component system and must be paired with specific 3300 XL cables and Proximitor sensors. -
Is this model suitable for forward mounting only?
Correct, this variant uses a forward mount configuration and is threaded for installation from the machine exterior. -
What materials can it sense?
Standard calibration is for AISI 4140 steel, but custom calibrations are possible for other conductive targets. -
Is the cable replaceable or field-repairable?
No, the probe cable is fixed. If damaged, the entire probe needs replacement. -
Can the system detect bearing failures?
Indirectly, yes—by measuring shaft vibration, it can identify signs sur bearing wear or failure. -
What’s the minimum measurable distance?
The linear operating range begins at 0.5 mm from the target surface. -
Is it compatible with older Bently Nevada systems?
It is optimized for the 3300 XL system and may not be compatible with legacy systems like the 7200 series. -
How do I ensure proper sealing for IP65 protection?
Use approved gaskets, sealing compounds, and proper cable glands as per Bently Nevada’s installation guidelines.
Related Modèles from the Same Series
| Modèle Number | Cable Length | Mount Style | Connector Type | Notes |
|---|---|---|---|---|
| 330101-00-40-05-02-00 | 40 inches | Forward Mount | ClickLoc | Similar functionality, shorter cable |
| 330101-00-50-05-02-00 | 50 inches | Forward Mount | ClickLoc | For extended reach installations |
| 330101-00-60-05-02-00 | 60 inches | Forward Mount | ClickLoc | Used in large-frame equipment |
| 330101-00-45-10-02-00 | 45 inches | Reverse Mount | ClickLoc | Alternate mounting configuration |
| 330104-00-08-10-02-00 | 8 meters | Armored Probe | ClickLoc | Harsh environments, extended range |
| 330103-00-08-10-02-00 | 8 meters | Extension Cable | N/A | For probe-to-proximitor connection |
Popular Bently Nevada Modèles (Same Marque)
| Modèle Number | Product Type | Function | Key Feature |
|---|---|---|---|
| 3500/42M | Proximitor Monitor | Vibration Monitoring | 4-channel system with buffered output |
| 3500/25 | Keyphasor Module | Speed and Phase Measurement | Dual-channel, essential for rotating machines |
| 3500/22M | Transient Data Interface | Data Communication Interface | Ethernet support, transient analysis |
| 330103-00-06-10-02-00 | Extension Cable (6m) | Probe System Interconnect | Essential for system matching |
| 7200-50 Series | Proximity Transducer | Displacement Monitoring | Legacy system, durable and proven |
| 330104-00-05-10-02-00 | 5-meter Proximity Probe | Vibration and Position Sensing | Armored cable for rugged installations |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.