製品紹介
The Bently Nevada 26530-12-10-03-018-191-22-04-00 Dual Probe Transducer System is a precision monitoring device engineered for industrial machinery vibration and shaft position measurement. The dual-probe configuration provides redundancy to ensure reliable, continuous operation, making it essential for machinery protection and condition monitoring systems.
This system incorporates two independent probes to deliver accurate measurements / shaft displacement, vibration amplitude, and phase information. It is extensively used in turbines, generators, compressors, pumps, and other high-speed rotating equipment. Designed to operate in harsh industrial environments, the transducer system /fers high imm台y to electrical noise, temperature fluctuations, and mechanical vibration, ensuring stable and consistent data.
With a 1.0-meter probe lead, the system allows flexible installation and precise alignment, facilitating integration into a variety / machinery monitoring networks. It is fully compatible with Bently Nevada 3300 series monitoring systems, providing high-quality signal output and supporting predictive maintenance strategies to reduce downtime and operational risk.
Technical Specifications
| Parameter | Specification |
|---|---|
| モデル | 26530-12-10-03-018-191-22-04-00 |
| Type | Dual Probe Transducer System |
| Function | Vibration and shaft displacement measurement |
| Number / Probes | 2 |
| Probe Lead Length | 1.0 meter |
| Output Signal | Differential voltage |
| Frequency Response | DC to 10 kHz |
| Operating Temperature | -40°C to +120°C |
| Storage Temperature | -40°C to +125°C |
| Operating Humidity | 0% to 95%, non-condensing |
| Sensitivity | 50 mV/mil nominal (typical, depending on probe configuration) |
| Probe Tip Clearance | 0.25 to 0.5 mm typical |
| Power Supply | 24 V DC typical |
| Power Consumption | 2 W |
| 重量 | 3 kg |
| Compliance Standards | ISO, CE, RoHS |
| Environmental Protection | IP65 rated housing for harsh industrial environments |
| Applications | Turbines, generators, compressors, pumps, motors, industrial rotating machinery |
Applications
The 26530-12-10-03-018-191-22-04-00 Dual Probe Transducer System is suitable for:
-
Turbine and generator vibration and shaft displacement monitoring
-
High-speed compressor and pump shaft monitoring
-
Critical industrial motors in petrochemical and power plants
-
Rotating machinery condition monitoring for predictive maintenance
-
Integration with Bently Nevada 3300 series monitoring systems
-
Industrial applications requiring redundancy, high accuracy, and real-time data
Advantages
-
Dual Probe Redundancy: Provides continuous operation and high reliability in critical monitoring applications.
-
High Precision Measurement: Detects small vibration amplitudes and precise shaft displacement.
-
Industrial-Grade Robustness: Resistant to vibration, electrical noise, and extreme temperatures.
-
Flexible Installation: 1.0-meter probe lead allows precise positioning and alignment.
-
Wide Frequency Response: DC to 10 kHz ensures monitoring / slow and fast machine dynamics.
-
Low Power Operation: Consumes only 2 W, minimizing heat generation.
-
Seamless Integration: Compatible with Bently Nevada 3300 series and other monitoring/protection systems.
-
Real-Time Continuous Monitoring: Enables predictive maintenance and machinery protection.
FAQ
-
What type / output signal does this dual probe transducer provide?
It provides a differential voltage output compatible with industrial monitoring systems. -
Can the system measure both vibration and shaft displacement?
Yes, it accurately measures both vibration amplitude and shaft position. -
What is the frequency response range?
The system operates from DC to 10 kHz, suitable for both slow and fast machinery movements. -
What is the typical probe tip clearance?
The probe tip clearance is typically 0.25 to 0.5 mm depending on installation. -
What is the operating temperature range?
The system operates from -40°C to +120°C and can be stored at -40°C to +125°C. -
What is the standard probe lead length?
The probe lead length is 1.0 meter. -
Is the system compatible with Bently Nevada 3300 series monitors?
Yes, it is fully compatible and commonly integrated into 3300 series systems. -
What are the power requirements for this transducer system?
The module requires 24 V DC and consumes approximately 2 W. -
How does the dual probe configuration enhance reliability?
Redundant probes ensure continuous measurement and system operation even if one probe fails. -
Can the system operate in harsh industrial environments?
Yes, it is IP65 rated and designed to withstand vibration, electrical noise, and temperature extremes.
Related モデルs (Same Series or Similar)
| モデル | 説明 |
|---|---|
| 26530-12-10-03-018-159-22-04-00 | Standard dual probe transducer system |
| 26530-12-10-03-018-187-22-04-00 | Dual probe transducer with extended frequency response |
| 26530-12-10-03-018-187-22-04-01 | High-temperature dual probe transducer |
| 26530-12-10-03-018-191-22-04-01 | Adjustable tip clearance dual probe transducer |
| 26530-12-10-03-018-191-22-04-02 | Multi-probe system for redundant measurement |
| 26530-12-10-03-018-191-22-04-03 | Dual probe transducer with integrated signal conditioning |
Popular Bently Nevada Transducers (Same ブランド)
| モデル | 説明 |
|---|---|
| 330130-040-00 | Standard proximity probe transducer |
| 330230-010-00 | High-speed turbine transducer |
| 330530-010-00 | Dual probe turbine vibration transducer |
| 330120-020-00 | Shaft position and vibration transducer |
| 330430-010-00 | Industrial pump monitoring transducer |
| 330330-010-00 | Generator vibration and position transducer |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。
