製品紹介
The Bently Nevada 26530-12-10-03-018-159-22-04-00 Dual Probe Transducer System is a high-precision monitoring device designed for industrial machinery vibration and shaft position measurement. This dual-probe configuration provides redundant sensing to ensure reliable operation, critical for machinery protection and condition monitoring systems.
The transducer system incorporates two independent probes, enabling accurate detection / shaft displacement, vibration amplitude, and phase information. It is widely used in turbine, generator, and high-speed rotating equipment monitoring. The system is engineered for extreme industrial environments, /fering high imm台y to electrical noise, temperature variations, and mechanical vibration.
Bently Nevada’s robust design ensures continuous operation and provides reliable data to protection and control systems, minimizing the risk / machinery damage and unplanned downtime. With a 1.0-meter probe lead, the system allows flexible installation and integration into a variety / machinery setups.
Technical Specifications
| Parameter | Specification |
|---|---|
| モデル | 26530-12-10-03-018-159-22-04-00 |
| Type | Dual Probe Transducer System |
| Function | Vibration and shaft displacement measurement |
| Number / Probes | 2 |
| Probe Lead Length | 1.0 meter |
| Output Signal | Differential voltage |
| Frequency Response | DC to 10 kHz |
| Operating Temperature | -40°C to +120°C |
| Storage Temperature | -40°C to +125°C |
| Operating Humidity | 0% to 95%, non-condensing |
| Sensitivity | 50 mV/mil nominal (typical, depending on probe configuration) |
| Probe Tip Clearance | 0.25 to 0.5 mm typical |
| Power Supply | 24 V DC typical |
| Power Consumption | 2 W |
| 重量 | 3 kg |
| Compliance Standards | ISO, CE, RoHS |
| Environmental Protection | IP65 rated housing for harsh industrial environments |
| Applications | Turbines, generators, compressors, pumps, motors, industrial rotating machinery |
Applications
The 26530-12-10-03-018-159-22-04-00 Dual Probe Transducer System is used in:
-
Turbine and generator vibration monitoring systems
-
High-speed industrial compressor shaft position monitoring
-
Critical pumps and motors in petrochemical and power plants
-
Rotating machinery condition monitoring for predictive maintenance
-
Integration with Bently Nevada 3300 series monitoring systems
-
Industrial facilities requiring redundancy and high measurement accuracy
Advantages
-
Dual Probe Configuration: Provides redundancy for critical monitoring applications.
-
High Accuracy: Detects small shaft displacements and vibration amplitudes with high precision.
-
Robust Industrial Design: Resistant to electrical noise, mechanical vibration, and temperature extremes.
-
Flexible Installation: 1.0-meter probe lead allows easy placement and alignment.
-
Wide Frequency Response: Captures DC to 10 kHz signals for both slow and fast machine movements.
-
Reliable Power Consumption: Low power requirements reduce heat generation and improve efficiency.
-
Seamless Integration: Compatible with Bently Nevada 3300 series and other protection/monitoring systems.
-
Continuous Monitoring: Provides real-time data for machinery protection and predictive maintenance.
FAQ
-
What type / signal output does the dual probe system provide?
It provides a differential voltage output suitable for connection to monitoring and protection systems. -
Can the transducer system measure both vibration and shaft displacement?
Yes, it provides accurate measurements / both vibration amplitude and shaft position. -
What is the frequency response / the system?
The system supports DC to 10 kHz frequency response, capturing both slow and high-speed machine movements. -
What is the typical probe tip clearance?
The probe tip clearance typically ranges from 0.25 to 0.5 mm depending on installation. -
What is the operating temperature range?
It operates reliably from -40°C to +120°C, with storage capability up to +125°C. -
What is the recommended probe lead length?
The standard probe lead length is 1.0 meter for flexible installation. -
Is the transducer system compatible with Bently Nevada 3300 series monitors?
Yes, it is fully compatible and commonly integrated into 3300 series monitoring systems. -
What is the power requirement for the dual probe system?
It requires 24 V DC and typically consumes 2 W / power. -
How does the dual probe design enhance reliability?
The dual probe design provides redundancy, ensuring continued operation if one probe fails or signals are inconsistent. -
Can the system be used in harsh industrial environments?
Yes, the housing is IP65 rated and resistant to vibration, electrical noise, and temperature extremes.
Related モデルs (Same Series or Similar)
| モデル | 説明 |
|---|---|
| 26530-12-10-03-018-159-22-04-01 | Single probe transducer system |
| 26530-12-10-03-018-159-22-04-02 | Dual probe transducer with extended frequency response |
| 26530-12-10-03-018-159-22-04-03 | High temperature dual probe transducer |
| 26530-12-10-03-018-159-22-04-04 | Dual probe with adjustable tip clearance |
| 26530-12-10-03-018-159-22-04-05 | Multi-probe transducer system for redundancy |
| 26530-12-10-03-018-159-22-04-06 | Dual probe transducer with integrated signal conditioning |
Popular Bently Nevada Transducers (Same ブランド)
| モデル | 説明 |
|---|---|
| 330130-040-00 | Standard proximity probe transducer |
| 330230-010-00 | High-speed turbine transducer |
| 330530-010-00 | Dual probe turbine vibration transducer |
| 330120-020-00 | Shaft position and vibration transducer |
| 330430-010-00 | Industrial pump monitoring transducer |
| 330330-010-00 | Generator vibration and position transducer |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。
