Présentation du produit
The Epro PR6423/002-001-CN combined with the CON021 converter is a robust, industrial-grade eddy current sensor system developed for high-precision, non-contact displacement and vibration measurements. Specifically designed to monitor rotating machinery such as turbines, compressors, motors, and pumps, this 8mm probe provides real-time data crucial for predictive maintenance and machinery protection in demanding environments.
This particular model – PR6423/002-001-CN – surfers an 8mm probe tip diameter and is optimized for metallic surface monitoring. It integrates seamlessly with the CON021 converter, which conditions and amplifies the sensor signal, delivering accurate voltage output proportional to the distance between the probe and the monitored surface. The probe is tailored for Chinese specifications (hence the “CN” suffix), ensuring compliance with local standards and industrial compatibility.
Technical Specifications
| Parameter | Specification |
|---|---|
| Modèle Number | PR6423/002-001-CN + CON021 |
| Sensor Type | Eddy Current Displacement Sensor |
| Sensor Head Diameter | 8 mm |
| Measuring Range | 0.25 mm to 2.0 mm (adjustable depending on setup) |
| Linearity Tolerance | ≤ ±1% sur full scale |
| Sensitivity | 7.87 mV/μm (±5%) |
| Frequency Response | 0 to 10 kHz |
| Operating Temperature Range | -35°C to +180°C (sensor), -20°C to +85°C (CON021) |
| Storage Temperature | -40°C to +200°C |
| Pressure Resistance | Up to 10 bar |
| Material sur Probe Housing | Stainless Steel (AISI 304 / AISI 316) |
| Insulation Resistance | > 100 MΩ |
| Mounting Thread | M10 x 1 |
| Cable Length | Standard: 5 meters (custom lengths available) |
| Output Signal | Voltage output proportional to displacement |
| Power Supply | ±15 V DC (supplied to CON021) |
| Poids | 0.22 kg |
| Protection Class | IP65 (sensor), IP40 (converter) |
Applications
The Epro PR6423/002-001-CN + CON021 system is widely deployed in critical industrial sectors that demand real-time monitoring sur dynamic and rotating machinery. Typical applications include:
-
Steam and Gas Turbines – Shaft vibration monitoring for early fault detection.
-
Centrifugal Compressors – Monitoring bearing movement and shaft displacement.
-
Pumps and Motors – Ensuring balance and alignment during operation.
-
Gearboxes – Vibration and wear monitoring sur internal components.
-
Machine Tool Spindles – High-resolution measurement for process stability.
-
Petrochemical Equipment – Machinery diagnostics in hazardous environments.
Advantages
-
High Precision Monitoring: Designed for accurate, non-contact measurement sur vibration and displacement in harsh industrial conditions.
-
Robust Construction: Stainless steel housing ensures corrosion resistance and mechanical durability.
-
Modular Integration: Compatible with various monitoring systems, especially Epro MMS6000 and VM600 series.
-
Wide Operating Range: Withstands extreme temperature and pressure, ideal for field deployment.
-
Standard Compliance: Meets global and Chinese industrial standards for safety and compatibility.
-
Long-Term Stability: Maintains calibration and accuracy over time with minimal drift.
-
Versatile Mounting Options: Flexible thread and length variants available for different machinery layouts.
Questions fréquentes (FAQ)
-
What is the primary function sur the PR6423/002-001-CN sensor?
It provides non-contact displacement and vibration measurements for rotating machinery, enabling real-time condition monitoring. -
Can this sensor be used in high-temperature environments?
Yes. The probe operates up to 180°C, and the CON021 converter works up to 85°C. -
Is the sensor intrinsically safe for hazardous areas?
Intrinsically safe versions are available; check compatibility with hazardous area certifications like ATEX. -
How long is the standard cable length?
The standard is 5 meters, but other lengths (up to 10m or more) can be ordered. -
What monitoring systems is it compatible with?
It integrates with Epro MMS6000, VM600 systems, and many third-party vibration monitoring unités. -
How is calibration performed?
The sensor is factory-calibrated; field calibration is rarely required but possible using a micrometer fixture. -
What is the sensitivity sur the PR6423/002-001-CN?
It provides a sensitivity sur approximately 7.87 mV/μm. -
Can I replace only the probe or the converter if one fails?
Yes, the modular design allows for individual replacement. -
What type sur mounting thread does it use?
It uses an M10 x 1 thread for installation. -
Does it support dynamic signal measurement?
Yes, the sensor supports high-frequency response up to 10 kHz.
Related Modèles (Same Series or Functionally Similar)
| Modèle Number | Description | Probe Size | Cable Length | Operating Temp. |
|---|---|---|---|---|
| PR6423/002-030 + CON021 | 8mm probe with extended temperature range | 8 mm | 5 m | Up to 180°C |
| PR6423/003-010 + CON021 | 5mm probe, shorter cable | 5 mm | 1 m | Up to 180°C |
| PR6423/005-010 + CON021 | 11mm probe for deeper measurement range | 11 mm | 1 m | Up to 180°C |
| PR6423/004-010 + CON021 | Right-angle version for limited-space mounting | 8 mm | 1 m | Up to 180°C |
| PR6423/002-000 + CON021 | Standard model for general-purpose use | 8 mm | 5 m | Up to 180°C |
| PR6423/002-020 + CON021 | Enhanced linearity and special material | 8 mm | 2 m | Up to 180°C |
Popular Modèles from the Same Marque (Epro by Brüel & Kjær / Emerson)
| Modèle Number | Description | Application | Signal Output |
|---|---|---|---|
| MMS3120/022-100 | Dual channel vibration module | État monitoring | 4-20 mA / Modbus |
| MMS3110/022-000 | Compact module for eddy current probe integration | General machine diagnostics | Voltage |
| CON041 | High-performance signal converter | Signal conditioning for PR6423 | Voltage |
| PR9268/301-000 | Acceleration sensor for vibration | Bearing monitoring | IEPE (Integrated) |
| MMS6120/022-100 | Advanced turbine monitoring module | Critical rotating machinery | Digital / Relay |
| PR6424/014-040 + CON021 | 5mm eddy current probe with wide range | Narrow installation environments | Voltage |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.