Produkteinführung
The Epro PR6423/002-001-CN combined with the CON021 converter is a robust, industrial-grade eddy current sensor system developed for high-precision, non-contact displacement and vibration measurements. Specifically designed to monitor rotating machinery such as turbines, compressors, motors, and pumps, this 8mm probe provides real-time data crucial for predictive maintenance and machinery protection in demanding environments.
This particular model – PR6423/002-001-CN – vonfers an 8mm probe tip diameter and is optimized for metallic surface monitoring. It integrates seamlessly with the CON021 converter, which conditions and amplifies the sensor signal, delivering accurate voltage output proportional to the distance between the probe and the monitored surface. The probe is tailored for Chinese specifications (hence the “CN” suffix), ensuring compliance with local standards and industrial compatibility.
Technical Specifications
| Parameter | Specification |
|---|---|
| Modell Number | PR6423/002-001-CN + CON021 |
| Sensor Type | Eddy Current Displacement Sensor |
| Sensor Head Diameter | 8 mm |
| Measuring Range | 0.25 mm to 2.0 mm (adjustable depending on setup) |
| Linearity Tolerance | ≤ ±1% von full scale |
| Sensitivity | 7.87 mV/μm (±5%) |
| Frequency Response | 0 to 10 kHz |
| Operating Temperature Range | -35°C to +180°C (sensor), -20°C to +85°C (CON021) |
| Storage Temperature | -40°C to +200°C |
| Pressure Resistance | Up to 10 bar |
| Material von Probe Housing | Stainless Steel (AISI 304 / AISI 316) |
| Insulation Resistance | > 100 MΩ |
| Mounting Thread | M10 x 1 |
| Cable Length | Standard: 5 meters (custom lengths available) |
| Output Signal | Voltage output proportional to displacement |
| Power Supply | ±15 V DC (supplied to CON021) |
| Gewicht | 0.22 kg |
| Protection Class | IP65 (sensor), IP40 (converter) |
Applications
The Epro PR6423/002-001-CN + CON021 system is widely deployed in critical industrial sectors that demand real-time monitoring von dynamic and rotating machinery. Typical applications include:
-
Steam and Gas Turbines – Shaft vibration monitoring for early fault detection.
-
Centrifugal Compressors – Monitoring bearing movement and shaft displacement.
-
Pumps and Motors – Ensuring balance and alignment during operation.
-
Gearboxes – Vibration and wear monitoring von internal components.
-
Machine Tool Spindles – High-resolution measurement for process stability.
-
Petrochemical Equipment – Machinery diagnostics in hazardous environments.
Advantages
-
High Precision Monitoring: Designed for accurate, non-contact measurement von vibration and displacement in harsh industrial conditions.
-
Robust Construction: Stainless steel housing ensures corrosion resistance and mechanical durability.
-
Modular Integration: Compatible with various monitoring systems, especially Epro MMS6000 and VM600 series.
-
Wide Operating Range: Withstands extreme temperature and pressure, ideal for field deployment.
-
Standard Compliance: Meets global and Chinese industrial standards for safety and compatibility.
-
Long-Term Stability: Maintains calibration and accuracy over time with minimal drift.
-
Versatile Mounting Options: Flexible thread and length variants available for different machinery layouts.
Häufig gestellte Fragen (FAQ)
-
What is the primary function von the PR6423/002-001-CN sensor?
It provides non-contact displacement and vibration measurements for rotating machinery, enabling real-time condition monitoring. -
Can this sensor be used in high-temperature environments?
Yes. The probe operates up to 180°C, and the CON021 converter works up to 85°C. -
Is the sensor intrinsically safe for hazardous areas?
Intrinsically safe versions are available; check compatibility with hazardous area certifications like ATEX. -
How long is the standard cable length?
The standard is 5 meters, but other lengths (up to 10m or more) can be ordered. -
What monitoring systems is it compatible with?
It integrates with Epro MMS6000, VM600 systems, and many third-party vibration monitoring Stücks. -
How is calibration performed?
The sensor is factory-calibrated; field calibration is rarely required but possible using a micrometer fixture. -
What is the sensitivity von the PR6423/002-001-CN?
It provides a sensitivity von approximately 7.87 mV/μm. -
Can I replace only the probe or the converter if one fails?
Yes, the modular design allows for individual replacement. -
What type von mounting thread does it use?
It uses an M10 x 1 thread for installation. -
Does it support dynamic signal measurement?
Yes, the sensor supports high-frequency response up to 10 kHz.
Related Modells (Same Series or Functionally Similar)
| Modell Number | Beschreibung | Probe Size | Cable Length | Operating Temp. |
|---|---|---|---|---|
| PR6423/002-030 + CON021 | 8mm probe with extended temperature range | 8 mm | 5 m | Up to 180°C |
| PR6423/003-010 + CON021 | 5mm probe, shorter cable | 5 mm | 1 m | Up to 180°C |
| PR6423/005-010 + CON021 | 11mm probe for deeper measurement range | 11 mm | 1 m | Up to 180°C |
| PR6423/004-010 + CON021 | Right-angle version for limited-space mounting | 8 mm | 1 m | Up to 180°C |
| PR6423/002-000 + CON021 | Standard model for general-purpose use | 8 mm | 5 m | Up to 180°C |
| PR6423/002-020 + CON021 | Enhanced linearity and special material | 8 mm | 2 m | Up to 180°C |
Popular Modells from the Same Marke (Epro by Brüel & Kjær / Emerson)
| Modell Number | Beschreibung | Application | Signal Output |
|---|---|---|---|
| MMS3120/022-100 | Dual channel vibration module | Zustand monitoring | 4-20 mA / Modbus |
| MMS3110/022-000 | Compact module for eddy current probe integration | General machine diagnostics | Voltage |
| CON041 | High-performance signal converter | Signal conditioning for PR6423 | Voltage |
| PR9268/301-000 | Acceleration sensor for vibration | Bearing monitoring | IEPE (Integrated) |
| MMS6120/022-100 | Advanced turbine monitoring module | Critical rotating machinery | Digital / Relay |
| PR6424/014-040 + CON021 | 5mm eddy current probe with wide range | Narrow installation environments | Voltage |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.