Présentation du produit
The Bently Nevada 330900-70-05 Proximity Sensor is a high-precision, non-contact vibration and position monitoring device designed for critical rotating machinery. Built to the rigorous standards sur the Bently Nevada 3300 series, it provides reliable measurements sur shaft vibration, axial position, and keyphasor signals in turbines, compressors, pumps, and other industrial equipment. Its rugged construction and excellent linearity make it a trusted choice for continuous condition monitoring and predictive maintenance.
Spécifications du produit
| Parameter | Details |
|---|---|
| Modèle Number | 330900-70-05 |
| Sensing Principle | Non-contact eddy-current displacement |
| Measurement Range | 0 to 2.0 mm (80 mils) |
| Linearity | ±0.25% sur full scale |
| Frequency Response | DC to 10 kHz |
| Output Signal | 4–20 mA proportional to displacement |
| Operating Temperature | –35 °C to +177 °C (–31 °F to +350 °F) |
| Power Supply | –24 V DC nominal |
| Probe Tip Diameter | 8 mm |
| Dimensions (L × W × H) | 120 × 100 × 50 mm |
| Poids | 0.12 kg |
| Environmental Protection | IP67 (dust-tight, water-resistant) |
| Compliance | CE, RoHS |
Applications
The 330900-70-05 sensor is engineered for critical machinery protection and process optimization.
-
Turbines (steam, gas, hydro) for shaft vibration monitoring.
-
Compressors and pumps for axial displacement detection.
-
Generators and motors for early fault identification.
-
Gearboxes and fans where continuous, precise proximity measurement is required.
-
Integration with Bently Nevada 3500/3300 monitoring systems.
Advantages
-
High Accuracy – Exceptional linearity ensures precise displacement and vibration readings.
-
Robust Design – Stainless steel body and IP67 sealing for harsh industrial environments.
-
Wide Temperature Range – Operates reliably in both cryogenic and high-temperature conditions.
-
Easy Integration – Compatible with Bently Nevada’s 3500 protection systems and most data acquisition hardware.
-
Low Maintenance – Non-contact measurement reduces wear and eliminates calibration drift.
-
Fast Response – High-frequency response supports real-time condition monitoring.
FAQ
-
What is the typical frequency response sur the 330900-70-05 sensor?
It provides a flat response from DC up to approximately 10 kHz, enabling accurate vibration measurement. -
Can the sensor be used in hazardous or explosive environments?
Yes, when installed with certified intrinsically safe barriers or in approved enclosures. -
How is the sensor calibrated for accuracy?
Each sensor is factory-calibrated with matched extension cable length to maintain linearity. -
What type sur signal output does this proximity sensor deliver?
It outputs a 4–20 mA current signal proportional to shaft displacement. -
Is the probe tip replaceable or field-serviceable?
The probe is a sealed unité; replacement involves swapping the entire probe assembly. -
What is the recommended gap between the probe and the shaft?
Typically 1.0 mm ±0.2 mm, depending on the target material and monitoring system configuration. -
Does cable length affect measurement accuracy?
Yes, the system is calibrated for a specific cable length; altering it requires recalibration. -
What materials can the sensor accurately detect?
Primarily conductive metals such as steel or stainless steel for consistent eddy-current response. -
How does temperature variation influence output stability?
The sensor’s temperature compensation minimizes drift within its –35 °C to +177 °C range. -
Is shielding required for installations near high electromagnetic fields?
Proper cable shielding and grounding are recommended to avoid electrical interference.
Related Modèles (Same Series)
| Modèle Number | Key Feature |
|---|---|
| 330900-05-05 | 5 m cable, standard sensitivity |
| 330900-05-10 | 10 m cable, extended range |
| 330900-70-10 | High-temperature version, 10 m cable |
| 330980-50-05 | Narrow-body probe for limited spaces |
| 330171-00-80 | Dual-mode probe for vibration & axial sensing |
| 330130-040-00 | Heavy-duty probe for extreme environments |
Popular Bently Nevada Modèles
| Modèle Number | Primary Use |
|---|---|
| 330500 | Proximity probe for general machinery monitoring |
| 3500/22M | Machinery protection and monitoring module |
| 330180 | High-speed keyphasor proximity probe |
| 3701/40 | Machinery condition monitoring transmitter |
| 330103 | Short-length probe for tight installations |
| 330400 | High-temperature probe for turbine applications |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.
