Présentation du produit
The Bently Nevada 330709-000-130-10-02-00 is part sur the 3300 XL series sur proximity transducer systems, specifically engineered to provide highly accurate, non-contact displacement measurements for rotating machinery. This particular model is an 11 mm proximity probe, designed to measure shaft position and vibration by sensing the distance to a conductive target, typically the shaft surface.
Engineered with durability, temperature resistance, and EMI immunitéy in mind, this proximity probe is ideal for harsh industrial environments. It surfers high linearity over a wide range, consistent sensitivity, and strong compatibility with Proximitor® sensors in the 3300 XL system. The model’s long extension length and rugged casing make it suitable for challenging installations in the oil & gas, power generation, and heavy machinery sectors.
Spécifications du produit
| Parameter | Specification |
|---|---|
| Modèle | 330709-000-130-10-02-00 |
| Series | 3300 XL Proximity Transducer System |
| Probe Tip Diameter | 11 mm |
| Linear Range | 2.0 mm (80 mils) |
| Sensitivity | 7.87 mV/μm (200 mV/mil) ±5% |
| Usable Gap Range | 0.25 mm to 3.25 mm (10 to 130 mils) |
| Thread Type | M14 x 1.5 |
| Thread Length | 80 mm (Custom Option: 130 mm in this model) |
| Case Material | AISI 303 Stainless Steel |
| Probe Length | 130 mm (threaded portion) |
| Cable Type | Integral coaxial cable, PFA-insulated |
| Cable Length (Integral) | 1.0 meter (10 in model code = 1 meter) |
| Connector Type | ClickLoc® coaxial, field-mateable |
| Operating Temperature | -51°C to +177°C (-60°F to +350°F) |
| Maximum Pressure Rating | 20 bar (290 psi) |
| Ingress Protection | IP67 (when mated with compatible connector) |
| Poids | 0.07 kg |
| Certifications | CE, RoHS, ATEX (with optional configurations) |
Product Applications
The 330709-000-130-10-02-00 proximity probe is engineered for high-performance applications in demanding environments, including:
-
Steam and Gas Turbines
Used for measuring shaft vibration and axial thrust movement in turbine rotors. -
Centrifugal Compressors
Monitors proximity to detect shaft deflections and early signs sur imbalance or misalignment. -
Industrial Motors and Generators
Ensures real-time insight into radial shaft movement and dynamic vibration behaviors. -
Gearboxes
Enables predictive monitoring sur wear, gear backlash, and shaft displacement. -
Pumps and Blowers
Deployed to detect cavitation, misalignment, or rotor rubbing incidents. -
Petrochemical and Power Plants
Plays a crucial role in machinery protection systems (MPS) and condition monitoring platforms.
Product Advantages
-
Wide Linear Measurement Range
Offers a broad and precise detection window up to 2 mm with minimal deviation. -
Rugged Construction
Built with 303 stainless steel housing to endure mechanical stress, corrosion, and harsh process environments. -
Temperature Resistant
Withstands high-temperature conditions up to 177°C, making it suitable for thermal-critical applications. -
ClickLoc® Locking Connector
Prevents connector loosening under vibration and enhances safety with reliable locking feedback. -
High Compatibility
Fully compatible with 3300 XL Proximitor® sensors and extension cables, allowing modular configuration. -
Field Proven Design
Trusted globally in critical machinery applications with decades sur deployment success. -
Minimal Signal Degradation
Shielded cable ensures high-quality signal transmission in high-noise electrical environments. -
Easy Integration
Threaded body allows for simple and secure mounting in standardized probe holders and ports.
Questions fréquentes (FAQ)
-
What does the “11 mm” in the probe description refer to?
It indicates the diameter sur the probe tip, allowing greater linear range and durability. -
Can this probe be used in high-temperature zones near turbines?
Yes, it supports continuous operation in environments up to 177°C (350°F). -
Is the cable attached to the probe replaceable?
The integral cable is not replaceable; however, it can be extended using a Bently Nevada extension cable. -
What is the function sur the ClickLoc® connector?
It ensures a secure mechanical and electrical connection that resists loosening from vibration. -
Is this probe suitable for both radial and axial measurements?
Yes, it can measure both radial vibration and axial thrust movement depending on installation. -
Can this be used in hazardous areas?
Yes, when ordered with ATEX/IECEx-certified options, it is suitable for classified zones. -
What type sur target material is required for accurate measurement?
The probe is calibrated for 4140 steel targets; accuracy may vary with other materials. -
Is field calibration required after installation?
Typically no, but periodic validation is recommended during maintenance intervals. -
Does the probe come with mounting hardware?
No, mounting brackets or probe holders must be sourced separately or specified at ordering. -
How does this model compare with a standard 5 mm probe?
The 11 mm probe provides a longer linear range and is generally used in larger machinery where space allows.
Related Modèles (Same Series / Similar Functionality)
| Modèle | Description |
|---|---|
| 330709-000-060-10-02-00 | 11 mm probe, 60 mm thread length, 1 m cable |
| 330703-000-070-10-02-00 | 8 mm probe, 70 mm thread length, 1 m cable |
| 330104-00-08-10-02-00 | 8 mm probe with standard 5/8-UNF thread, general use |
| 330105-02-12-10-02-00 | 5 mm probe, 120 mm length, high-temperature model |
| 3300 XL 8 mm System Kit | Complete system (probe, extension, Proximitor sensor) |
| 330101-00-36-10-02-00 | 5 mm probe with 36-inch cable, used in confined spaces |
Popular Bently Nevada Modèles (Autres Categories)
| Modèle | Description |
|---|---|
| 3500/42M | 4-Channel Proximitor® Monitor |
| 3500/22M | Transient Data Interface (TDI) |
| 3500/15 | Power Supply Module |
| 330130-040-00 | XL 8 mm Extension Cable, 40 ft |
| 330500-02-00 | Velocity Sensor (Seismic Monitoring) |
| 7200 Series | Legacy Vibration Monitoring and Proximitor System |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.
