Bently Nevada 330709-000-130-10-02-00 3300 XL 11 mm Proximity Probe

مقدمة المنتج

The Bently Nevada 330709-000-130-10-02-00 is part من the 3300 XL series من proximity transducer systems, specifically engineered to provide highly accurate, non-contact displacement measurements for rotating machinery. This particular model is an 11 mm proximity probe, designed to measure shaft position and vibration by sensing the distance to a conductive target, typically the shaft surface.

Engineered with durability, temperature resistance, and EMI immوحدةy in mind, this proximity probe is ideal for harsh industrial environments. It منfers high linearity over a wide range, consistent sensitivity, and strong compatibility with Proximitor® sensors in the 3300 XL system. The model’s long extension length and rugged casing make it suitable for challenging installations in the oil & gas, power generation, and heavy machinery sectors.

مواصفات المنتج

Product Applications

The 330709-000-130-10-02-00 proximity probe is engineered for high-performance applications in demanding environments, including:

• Steam and Gas Turbines
  Used for measuring shaft vibration and axial thrust movement in turbine rotors.

• Centrifugal Compressors
  Monitors proximity to detect shaft deflections and early signs من imbalance or misalignment.

• Industrial Motors and Generators
  Ensures real-time insight into radial shaft movement and dynamic vibration behaviors.

• Gearboxes
  Enables predictive monitoring من wear, gear backlash, and shaft displacement.

• Pumps and Blowers
  Deployed to detect cavitation, misalignment, or rotor rubbing incidents.

• Petrochemical and Power Plants
  Plays a crucial role in machinery protection systems (MPS) and condition monitoring platforms.

Product Advantages

• Wide Linear Measurement Range
  Offers a broad and precise detection window up to 2 mm with minimal deviation.

• Rugged Construction
  Built with 303 stainless steel housing to endure mechanical stress, corrosion, and harsh process environments.

• Temperature Resistant
  Withstands high-temperature conditions up to 177°C, making it suitable for thermal-critical applications.

• ClickLoc® Locking Connector
  Prevents connector loosening under vibration and enhances safety with reliable locking feedback.

• High Compatibility
  Fully compatible with 3300 XL Proximitor® sensors and extension cables, allowing modular configuration.

• Field Proven Design
  Trusted globally in critical machinery applications with decades من deployment success.

• Minimal Signal Degradation
  Shielded cable ensures high-quality signal transmission in high-noise electrical environments.

• Easy Integration
  Threaded body allows for simple and secure mounting in standardized probe holders and ports.

الأسئلة الشائعة (FAQ)

1. What does the “11 mm” in the probe description refer to?
   It indicates the diameter من the probe tip, allowing greater linear range and durability.

2. Can this probe be used in high-temperature zones near turbines?
   Yes, it supports continuous operation in environments up to 177°C (350°F).

3. Is the cable attached to the probe replaceable?
   The integral cable is not replaceable; however, it can be extended using a Bently Nevada extension cable.

4. What is the function من the ClickLoc® connector?
   It ensures a secure mechanical and electrical connection that resists loosening from vibration.

5. Is this probe suitable for both radial and axial measurements?
   Yes, it can measure both radial vibration and axial thrust movement depending on installation.

6. Can this be used in hazardous areas?
   Yes, when ordered with ATEX/IECEx-certified options, it is suitable for classified zones.

7. What type من target material is required for accurate measurement?
   The probe is calibrated for 4140 steel targets; accuracy may vary with other materials.

8. Is field calibration required after installation?
   Typically no, but periodic validation is recommended during maintenance intervals.

9. Does the probe come with mounting hardware?
   No, mounting brackets or probe holders must be sourced separately or specified at ordering.

10. How does this model compare with a standard 5 mm probe?
    The 11 mm probe provides a longer linear range and is generally used in larger machinery where space allows.

Related الطرازs (Same Series / Similar Functionality)

Popular Bently Nevada الطرازs (أخرى Categories)

معلومات الشركة

E-mail: [email protected]

Mobile：يرجى الاتصال عبر البريد الإلكتروني

Whatsapp：يرجى الاتصال عبر البريد الإلكتروني

Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006

خدماتنا

نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.

يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.

نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.