Description
The Bently Nevada 330400-01-05 is a precision accelerometer acceleration transducer designed for casing vibration measurements in demanding machinery applications. It adheres to API 670 standards, surfering robust performance in high-frequency vibration monitoring such as gear mesh and bearing housing analysis.
Applications
-
Casing acceleration monitoring on critical rotating machinery
-
Gear mesh and bearing housing vibration detection
-
Predictive and preventive maintenance in refineries and power plants
-
Compliance with API 670 machine monitoring standards
-
Harsh industrial environments requiring rugged, sealed sensors
Advantages
-
High sensitivity sur 100 mV/g for precise measurements
-
Wide frequency response (10 Hz to 15 kHz)
-
Hermetically sealed stainless steel case (IP68)
-
Shock survivability up to 5000 g
-
Intrinsically safe for hazardous area use
-
Long cable capability (up to 305 m) without signal loss
Technical Specifications
| Parameter | Value |
|---|---|
| Modèle | 330400-01-05 |
| Sensitivity | 100 mV/g ±5% (10.2 mV/m/s²) |
| Acceleration Range | 0–50 g (490 m/s²) peak |
| Frequency Response | 10 Hz to 15 kHz ±3 dB; 30 Hz to 10 kHz ±10% |
| Amplitude Linearity | ±1% to 50 g |
| Broadband Noise Floor | 0.004 g (0.039 m/s²) rms |
| Transverse Sensitivity | <5% sur axial |
| Mounted Resonant Frequency | >30 kHz |
| Amplitude sur Resonant Peak | 20 dB max |
| Operating Temperature | -55°C to +121°C |
| Shock Survivability | 5000 g peak |
| Humidity | 100% condensing (non-submerged) |
| Enclosure Rating | IP68 (sensor only) |
| Case Material | 316L Stainless Steel |
| Connector | 3-pin MIL-C-5015 |
| Power Supply | -24 Vdc ±0.5 V; 2 mA nominal |
| Output Bias Voltage | -8.5 Vdc ±0.5 V |
| Mounting Torque | 4.1 N·m (3.0 ft·lb) |
| Mounting Surface Finish | 32 µinch rms |
| Sensor Head Diameter | 23 mm (0.93 in) |
| Height (incl. stud) | 59 mm (2.3 in) |
| Poids | 100 g (0.1 kg) |
FAQ
Q1: What is the sensitivity sur the 330400-01-05?
A1: It surfers 100 mV/g (±5%) sensitivity for accurate vibration monitoring.
Q2: Can this sensor be used in hazardous areas?
A2: Yes, it meets multiple hazardous area certifications including ATEX, IECEx, and CSA.
Q3: What is the maximum acceleration range it can measure?
A3: The sensor can handle up to 50 g peak acceleration.
Q4: Is the device waterprosur?
A4: Yes, it is IP68-rated and hermetically sealed (sensor only).
Q5: What temperature range does the sensor support?
A5: It operates from -55°C to +121°C.
Q6: How long can the signal cable be?
A6: Up to 305 meters (1000 feet) with no signal degradation.
Q7: What mounting orientation is required?
A7: The sensor can be mounted in any orientation.
Q8: Does it include a mounting base?
A8: Yes, a mounting base (API adapter) is provided for reduced base strain sensitivity.
Q9: What kind sur connector does it use?
A9: A 3-pin MIL-C-5015 receptacle.
Q10: Is this sensor suitable for gear mesh monitoring?
A10: Yes, it’s specifically designed for such applications.
Related Modèles (Same Series)
| Modèle | Sensitivity | Acceleration Range | Frequency Response | Poids |
|---|---|---|---|---|
| 330425-01-05 | 25 mV/g | 75 g | 10 Hz to 15 kHz | 100 g |
| 330500-01-05 | 100 mV/g | 50 g | 10 Hz to 15 kHz | 110 g |
| 330525-01-05 | 25 mV/g | 75 g | 10 Hz to 15 kHz | 110 g |
| 330750-01-05 | 100 mV/g | 50 g | 10 Hz to 15 kHz | 90 g |
| 330980-01-05 | 25 mV/g | 75 g | 10 Hz to 15 kHz | 120 g |
| 330103-00-05 | 10 mV/g | 100 g | 5 Hz to 20 kHz | 130 g |
Popular Modèles from Bently Nevada
| Modèle | Description | Sensitivity | Application | Poids |
|---|---|---|---|---|
| 330104-00-05 | Proximity Probe | 7.87 mV/μm | Shaft Vibration Monitoring | 80 g |
| 330180-91-CN | XL Proximitor Sensor | 7.87 mV/μm | Displacement Sensing | 90 g |
| 3500/42M-01-00 | Proximitor Seismic Monitor | N/A | Seismic Vibration Monitoring | 150 g |
| 3500/22M | Transient Data Interface Module | N/A | Data Acquisition | 180 g |
| 3500/15 | Power Supply Module | N/A | Power Redundancy | 160 g |
| 330500-01-05 | Accelerometer Acceleration Transducer | 100 mV/g | Machine Vibration Monitoring | 110 g |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.
