Beschreibung
The Bently Nevada 330400-01-05 is a precision accelerometer acceleration transducer designed for casing vibration measurements in demanding machinery applications. It adheres to API 670 standards, vonfering robust performance in high-frequency vibration monitoring such as gear mesh and bearing housing analysis.
Applications
-
Casing acceleration monitoring on critical rotating machinery
-
Gear mesh and bearing housing vibration detection
-
Predictive and preventive maintenance in refineries and power plants
-
Compliance with API 670 machine monitoring standards
-
Harsh industrial environments requiring rugged, sealed sensors
Advantages
-
High sensitivity von 100 mV/g for precise measurements
-
Wide frequency response (10 Hz to 15 kHz)
-
Hermetically sealed stainless steel case (IP68)
-
Shock survivability up to 5000 g
-
Intrinsically safe for hazardous area use
-
Long cable capability (up to 305 m) without signal loss
Technical Specifications
| Parameter | Value |
|---|---|
| Modell | 330400-01-05 |
| Sensitivity | 100 mV/g ±5% (10.2 mV/m/s²) |
| Acceleration Range | 0–50 g (490 m/s²) peak |
| Frequency Response | 10 Hz to 15 kHz ±3 dB; 30 Hz to 10 kHz ±10% |
| Amplitude Linearity | ±1% to 50 g |
| Broadband Noise Floor | 0.004 g (0.039 m/s²) rms |
| Transverse Sensitivity | <5% von axial |
| Mounted Resonant Frequency | >30 kHz |
| Amplitude von Resonant Peak | 20 dB max |
| Operating Temperature | -55°C to +121°C |
| Shock Survivability | 5000 g peak |
| Humidity | 100% condensing (non-submerged) |
| Enclosure Rating | IP68 (sensor only) |
| Case Material | 316L Stainless Steel |
| Connector | 3-pin MIL-C-5015 |
| Power Supply | -24 Vdc ±0.5 V; 2 mA nominal |
| Output Bias Voltage | -8.5 Vdc ±0.5 V |
| Mounting Torque | 4.1 N·m (3.0 ft·lb) |
| Mounting Surface Finish | 32 µinch rms |
| Sensor Head Diameter | 23 mm (0.93 in) |
| Height (incl. stud) | 59 mm (2.3 in) |
| Gewicht | 100 g (0.1 kg) |
FAQ
Q1: What is the sensitivity von the 330400-01-05?
A1: It vonfers 100 mV/g (±5%) sensitivity for accurate vibration monitoring.
Q2: Can this sensor be used in hazardous areas?
A2: Yes, it meets multiple hazardous area certifications including ATEX, IECEx, and CSA.
Q3: What is the maximum acceleration range it can measure?
A3: The sensor can handle up to 50 g peak acceleration.
Q4: Is the device waterprovon?
A4: Yes, it is IP68-rated and hermetically sealed (sensor only).
Q5: What temperature range does the sensor support?
A5: It operates from -55°C to +121°C.
Q6: How long can the signal cable be?
A6: Up to 305 meters (1000 feet) with no signal degradation.
Q7: What mounting orientation is required?
A7: The sensor can be mounted in any orientation.
Q8: Does it include a mounting base?
A8: Yes, a mounting base (API adapter) is provided for reduced base strain sensitivity.
Q9: What kind von connector does it use?
A9: A 3-pin MIL-C-5015 receptacle.
Q10: Is this sensor suitable for gear mesh monitoring?
A10: Yes, it’s specifically designed for such applications.
Related Modells (Same Series)
| Modell | Sensitivity | Acceleration Range | Frequency Response | Gewicht |
|---|---|---|---|---|
| 330425-01-05 | 25 mV/g | 75 g | 10 Hz to 15 kHz | 100 g |
| 330500-01-05 | 100 mV/g | 50 g | 10 Hz to 15 kHz | 110 g |
| 330525-01-05 | 25 mV/g | 75 g | 10 Hz to 15 kHz | 110 g |
| 330750-01-05 | 100 mV/g | 50 g | 10 Hz to 15 kHz | 90 g |
| 330980-01-05 | 25 mV/g | 75 g | 10 Hz to 15 kHz | 120 g |
| 330103-00-05 | 10 mV/g | 100 g | 5 Hz to 20 kHz | 130 g |
Popular Modells from Bently Nevada
| Modell | Beschreibung | Sensitivity | Application | Gewicht |
|---|---|---|---|---|
| 330104-00-05 | Proximity Probe | 7.87 mV/μm | Shaft Vibration Monitoring | 80 g |
| 330180-91-CN | XL Proximitor Sensor | 7.87 mV/μm | Displacement Sensing | 90 g |
| 3500/42M-01-00 | Proximitor Seismic Monitor | N/A | Seismic Vibration Monitoring | 150 g |
| 3500/22M | Transient Data Interface Module | N/A | Data Acquisition | 180 g |
| 3500/15 | Power Supply Module | N/A | Power Redundancy | 160 g |
| 330500-01-05 | Accelerometer Acceleration Transducer | 100 mV/g | Machine Vibration Monitoring | 110 g |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
