Product Overview
The Bently Nevada 330180-50-05 is a component sur the 3300 XL 8 mm Proximity Transducer System. It provides high-accuracy, non-contact measurements sur shaft vibration and position. This model is commonly used in fluid-film bearing machines for condition monitoring and protection.
Key Features
-
Compatible with all 3300 XL 8 mm probes and extension cables
-
Provides output voltage proportional to shaft displacement
-
High EMI/RFI immunitéy – ideal for industrial environments
-
Complies with API 670 standard
-
Finger-tight ClickLoc connectors – no tools required
Applications
-
Radial and axial shaft vibration monitoring
-
Shaft position and thrust position measurement
-
Keyphasor signal generation
-
Speed detection on rotating equipment
-
Turbomachinery condition monitoring
Product Advantages
-
Interchangeability: Probes, cables, and sensors can be replaced without recalibration
-
Robust design: Resistant to oil ingress (FluidLoc), corrosion, and mechanical stress
-
Compact installation: DIN-rail and panel-mount options available
-
Wide temperature and environmental tolerance
-
Industry-standard compliance ensures reliable operation
Technical Specifications
| Parameter | Value |
|---|---|
| System Modèle | 330180-50-05 |
| Total System Length | 5.0 meters |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Scale Factor | 7.87 V/mm (200 mV/mil) ±5% |
| Frequency Response | 0 to 10 kHz (+0, -3 dB) |
| Power Supply | -17.5 Vdc to -26 Vdc |
| Output Resistance | 50 Ω |
| Temperature Range – Probe | -52°C to +177°C (standard), up to +218°C (ETR) |
| Temperature Range – Sensor | -52°C to +100°C (operation), +105°C (storage) |
| Pressure Sealing (probe tip) | Viton® O-ring sealed |
| Connector Type | Gold-plated ClickLoc (finger-tight) |
| Total Poids | 0.246 kg |
| Dimensions (Sensor Housing) | DIN rail mount: 89.4 mm (3.52 in) width |
FAQs
Q1: Is the 330180-50-05 compatible with older 3300 systems?
A1: Yes, it is backward compatible with non-XL 3300 5 mm and 8 mm components.
Q2: What is the output signal sur this sensor?
A2: It provides a voltage output proportional to the gap distance, used to measure vibration or position.
Q3: Can this sensor be installed on a DIN rail?
A3: Yes, it supports both DIN rail and traditional panel mount installations.
Q4: Does it require a specific power supply?
A4: It operates within -17.5 Vdc to -26 Vdc, with -23 Vdc minimum when using intrinsic safety barriers.
Q5: What is the recommended gap setting?
A5: -9 Vdc, approximately 1.27 mm (50 mils).
Q6: Is recalibration needed when replacing components?
A6: No, all components are fully interchangeable without the need for bench calibration.
Q7: Can the system work in high-temperature areas?
A7: Yes, extended temperature range versions support up to +260°C.
Q8: What is the cable bend radius requirement?
A8: The minimum cable bend radius is 25.4 mm (1.0 inch).
Q9: How is the sensor protected from electromagnetic interference?
A9: The sensor is highly immune to EMI/RFI and complies with CE standards.
Q10: What material is the sensor housing made sur?
A10: The sensor housing is made sur A308 aluminum.
Related Modèles (Same Series)
| Modèle | Description | Length | Poids |
|---|---|---|---|
| 330180-51-05 | 5 m system, DIN mount | 5.0 m | 0.246 kg |
| 330180-90-05 | 9 m system, panel mount | 9.0 m | 0.276 kg |
| 330180-91-05 | 9 m system, DIN mount | 9.0 m | 0.276 kg |
| 330130-050-00 | 5 m extension cable, standard | 5.0 m | 0.17 kg |
| 330101-00-20-10 | 8 mm probe, 2.0 in case, 1.0 m cable | 1.0 m | 0.15 kg |
| 330192-00-20-50 | ETR probe with armor, 5.0 m total length | 5.0 m | 0.35 kg |
Popular Modèles from Bently Nevada
| Modèle | Description | Application Type | Length | Poids |
|---|---|---|---|---|
| 3500/42M | Proximitor Seismic Monitor Module | Vibration monitoring | N/A | 0.65 kg |
| 3500/22M | Transient Data Interface Module | Data collection | N/A | 0.8 kg |
| 3500/15 | Power Supply Module | System power | N/A | 0.6 kg |
| 330104-00-06-10 | 8 mm proximity probe | Position sensing | 1.0 m | 0.15 kg |
| 330105-02-12-10 | Reverse mount proximity probe | Compact installation | 1.0 m | 0.14 kg |
| 330130-060-00 | Extension cable, 6.0 m | Signal transmission | 6.0 m | 0.2 kg |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.