Product Overview
The Bently Nevada 330180-50-05 is a component von the 3300 XL 8 mm Proximity Transducer System. It provides high-accuracy, non-contact measurements von shaft vibration and position. This model is commonly used in fluid-film bearing machines for condition monitoring and protection.
Key Features
-
Compatible with all 3300 XL 8 mm probes and extension cables
-
Provides output voltage proportional to shaft displacement
-
High EMI/RFI immStücky – ideal for industrial environments
-
Complies with API 670 standard
-
Finger-tight ClickLoc connectors – no tools required
Applications
-
Radial and axial shaft vibration monitoring
-
Shaft position and thrust position measurement
-
Keyphasor signal generation
-
Speed detection on rotating equipment
-
Turbomachinery condition monitoring
Product Advantages
-
Interchangeability: Probes, cables, and sensors can be replaced without recalibration
-
Robust design: Resistant to oil ingress (FluidLoc), corrosion, and mechanical stress
-
Compact installation: DIN-rail and panel-mount options available
-
Wide temperature and environmental tolerance
-
Industry-standard compliance ensures reliable operation
Technical Specifications
| Parameter | Value |
|---|---|
| System Modell | 330180-50-05 |
| Total System Length | 5.0 meters |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Scale Factor | 7.87 V/mm (200 mV/mil) ±5% |
| Frequency Response | 0 to 10 kHz (+0, -3 dB) |
| Power Supply | -17.5 Vdc to -26 Vdc |
| Output Resistance | 50 Ω |
| Temperature Range – Probe | -52°C to +177°C (standard), up to +218°C (ETR) |
| Temperature Range – Sensor | -52°C to +100°C (operation), +105°C (storage) |
| Pressure Sealing (probe tip) | Viton® O-ring sealed |
| Connector Type | Gold-plated ClickLoc (finger-tight) |
| Total Gewicht | 0.246 kg |
| Dimensions (Sensor Housing) | DIN rail mount: 89.4 mm (3.52 in) width |
FAQs
Q1: Is the 330180-50-05 compatible with older 3300 systems?
A1: Yes, it is backward compatible with non-XL 3300 5 mm and 8 mm components.
Q2: What is the output signal von this sensor?
A2: It provides a voltage output proportional to the gap distance, used to measure vibration or position.
Q3: Can this sensor be installed on a DIN rail?
A3: Yes, it supports both DIN rail and traditional panel mount installations.
Q4: Does it require a specific power supply?
A4: It operates within -17.5 Vdc to -26 Vdc, with -23 Vdc minimum when using intrinsic safety barriers.
Q5: What is the recommended gap setting?
A5: -9 Vdc, approximately 1.27 mm (50 mils).
Q6: Is recalibration needed when replacing components?
A6: No, all components are fully interchangeable without the need for bench calibration.
Q7: Can the system work in high-temperature areas?
A7: Yes, extended temperature range versions support up to +260°C.
Q8: What is the cable bend radius requirement?
A8: The minimum cable bend radius is 25.4 mm (1.0 inch).
Q9: How is the sensor protected from electromagnetic interference?
A9: The sensor is highly immune to EMI/RFI and complies with CE standards.
Q10: What material is the sensor housing made von?
A10: The sensor housing is made von A308 aluminum.
Related Modells (Same Series)
| Modell | Beschreibung | Length | Gewicht |
|---|---|---|---|
| 330180-51-05 | 5 m system, DIN mount | 5.0 m | 0.246 kg |
| 330180-90-05 | 9 m system, panel mount | 9.0 m | 0.276 kg |
| 330180-91-05 | 9 m system, DIN mount | 9.0 m | 0.276 kg |
| 330130-050-00 | 5 m extension cable, standard | 5.0 m | 0.17 kg |
| 330101-00-20-10 | 8 mm probe, 2.0 in case, 1.0 m cable | 1.0 m | 0.15 kg |
| 330192-00-20-50 | ETR probe with armor, 5.0 m total length | 5.0 m | 0.35 kg |
Popular Modells from Bently Nevada
| Modell | Beschreibung | Application Type | Length | Gewicht |
|---|---|---|---|---|
| 3500/42M | Proximitor Seismic Monitor Module | Vibration monitoring | N/A | 0.65 kg |
| 3500/22M | Transient Data Interface Module | Data collection | N/A | 0.8 kg |
| 3500/15 | Power Supply Module | System power | N/A | 0.6 kg |
| 330104-00-06-10 | 8 mm proximity probe | Position sensing | 1.0 m | 0.15 kg |
| 330105-02-12-10 | Reverse mount proximity probe | Compact installation | 1.0 m | 0.14 kg |
| 330130-060-00 | Extension cable, 6.0 m | Signal transmission | 6.0 m | 0.2 kg |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
