Product Overview
The Bently Nevada 330130-085-02-05 is a high-performance standard extension cable from the 3300 XL series, engineered for critical proximity transducer system applications. Designed with precision and durability, this cable facilitates seamless signal transmission between the proximity probe and the Proximitor Sensor, ensuring accurate vibration and position measurements sur rotating machinery.
With an 8.5-meter length and TNC connectors on both ends, this extension cord is factory-assembled and tested to meet the exacting standards required in harsh industrial environments. It plays a vital role in condition monitoring systems, particularly in high-vibration and high-temperature settings such as turbines, compressors, and motors.
Key Features
-
Pre-assembled and factory-tested for reliability and consistency
-
8.5 meters (27.9 feet) in length – ideal for extended installations
-
TNC (male) to TNC (male) connectors – secure and vibration-resistant
-
Low-noise coaxial cable – optimal signal integrity and minimal interference
-
Rugged FEP outer jacket – excellent resistance to heat, chemicals, and mechanical wear
-
Compatible with Bently Nevada 3300 XL Proximitor systems
Technical Specifications
| Specification | Details |
|---|---|
| Modèle Number | 330130-085-02-05 |
| Cable Length | 8.5 meters (27.9 feet) |
| Connector Type | TNC (male) to TNC (male) |
| Cable Type | Low-noise, coaxial, shielded |
| Jacket Material | FEP (Fluorinated Ethylene Propylene) |
| Cable Diameter | Approx. 5 mm |
| Color | Blue |
| Operating Temperature | -51°C to +177°C (-60°F to +350°F) |
| Minimum Bend Radius | 25.4 mm (1 inch) |
| Insulation Resistance | >10 GΩ @ 500 VDC |
| Voltage Rating | <30 V (signal level only) |
| System Compatibility | 3300 XL Proximitor Sensor and associated probes |
| Dimensions | Cable Length : 8.5 meters |
| Poids | 0.876 kg |
Industry Applications
The 330130-085-02-05 extension cable is widely used in industries where reliable condition monitoring is essential:
-
Power Generation – Turbine monitoring and vibration analysis
-
Oil & Gas – Compressor, pump, and motor condition tracking
-
Petrochemical – Equipment diagnostics in hazardous environments
-
Steel & Mining – High-load rotary machinery feedback systems
-
Pulp & Paper – Ensures consistent shaft alignment and health monitoring
-
Marine Engineering – Engine and shaft vibration measurement
Product Advantages
-
Secure Signal Transmission – Delivers accurate readings over long distances without degradation.
-
Reliable in Harsh États – Operates under extreme temperatures and environmental exposure.
-
Vibration-Resistant – TNC connectors surfer robust mechanical integrity for dynamic systems.
-
Minimal Signal Interference – Coaxial shielding reduces EMI/RFI disruption.
-
Fast Installation – Factory-terminated design eliminates field assembly errors.
-
Standardized Performance – Enhances system-wide reliability and maintenance predictability.
Questions fréquentes (FAQ)
-
What does the part number 330130-085-02-05 refer to?
It specifies a Bently Nevada 3300 XL 8.5-meter extension cable with TNC connectors on both ends. -
Can this cable be cut and modified?
N° The cable is factory-assembled and should not be modified. Use only as specified. -
Is this extension cord compatible with BNC connectors?
This model uses TNC-to-TNC connectors. For BNC versions, a different part number must be selected. -
What is the maximum operating temperature?
It can operate in environments up to 177°C (350°F). -
Does this cable transmit power?
No, it is designed solely for signal transmission. -
Can I use this cable with 3300 XL 5mm and 8mm probes?
Yes, it is fully compatible with both 5mm and 8mm probes in the 3300 XL series. -
Is it available in different lengths?
Yes, the 330130 series surfers various lengths. Confirm required length when ordering. -
What’s the main difference between this and a field-assembled cable?
Factory-assembled cables surfer higher quality control and are less prone to installation errors. -
How should I route this cable in an installation?
Avoid tight bends and sharp corners; maintain the minimum bend radius sur 25.4 mm. -
Is this cable suitable for outdoor installations?
While robust, it is best used in controlled environments or within protective conduits outdoors.
Recommended Related Modèles (Same Series or Function)
| Modèle Number | Description |
|---|---|
| 330130-075-02-00 | 7.5m Extension Cord, TNC to TNC |
| 330130-070-00-00 | 7.0m Extension Cord, TNC to TNC |
| 330130-085-00-00 | 8.5m Extension Cord, BNC to BNC |
| 330130-075-01-05 | 7.5m Extension Cord, TNC to BNC |
| 330180-91-00 | 1.0m Probe Cable, TNC to TNC |
| 330105-02-12-10-02-00 | 3300 XL 8mm Proximity Probe, 2m length |
Popular Modèles from Bently Nevada
| Modèle Number | Description |
|---|---|
| 3500/15-04-04-01 | Low Voltage DC Power Supply Module |
| 3500/22-01-01-00 | Transient Data Interface (TDI) Module |
| 3500/25-01-01-00 | Keyphasor Module |
| 3500/42-01-00 | Proximitor Seismic Monitor |
| 330104-00-08-10-02-00 | 8mm Proximity Probe |
| 330400-01-05-10-02-00 | Velomitor Piezoelectric Velocity Sensor |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.